Ahlers, D. (2020). Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V  (Vol. 19). Shaker.

Hielscher, C., Grenz, J., Camberg, A. A., &; Wingenbach, N. (2020). Ansatz zur effizienteren Auslegung von Hybridbauteilen. ATZ - Automobiltechnische Zeitschrift, 60–65.https://doi.org/10.1007/s35148-020-0284-8 

Hielscher, C., Grenz, J., Camberg, A. A., &; Wingenbach, N. (2020). Approach to More Efficient Design of Hybrid Components. ATZ Worldwide, 58–61.https://doi.org/10.1007/s38311-020-0267-0 

Wu, T., Tinkloh, S. R., Tröster, T., &; Zinn, W. (2020). Residual stress measurement in GFRP/steel hybrid components. In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. Web-Conference, Germany.

Camberg, A. A., &; Tröster, T. (2020). A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter. Presented at the International Deep-Drawing Research Group (IDDRG 2020), Seoul, South Korea.https://doi.org/10.1088/1757-899X/967/1/012077 

Camberg, A. A., Erhart, T., &; Tröster, T. (2020). Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework. Presented at the International Deep-Drawing Research Group (IDDRG 2020) , Seoul, South Korea.https://doi.org/10.13140/RG.2.2.23924.17288 

Schweizer, S., Akbulut Irmak, E. F., &; Tröster, T. (2020). Wood-based materials as a sustainable alternative for future car body construction. Future Materials, vitual.

Triebus, M., &; Tröster, T. (2020). A Holistic Approach to Optimization-Based Design of Hybrid Materials. In Proceedings 4th International Conference Hybrid Materials &; Structures. Web-Conference.

Claes, L., Baumhögger, E., Rüther, T., Gierse, J., Tröster, T., &; Henning, B. (2020). Reduction of systematic measurement deviation in acoustic absorption measurement systems. Fortschritte Der Akustik - DAGA 2020, 1077–1080.

Tinkloh, S. R., Wu, T., Tröster, T., &; Niendorf, T. (2020). Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids. Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany.

Wu, T., Tinkloh, S. R., Tröster, T., Zinn, W., &; Niendorf, T. (2020). Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method. Journal of Composites Science, Article 143.https://doi.org/10.3390/jcs4030143 

Huxol, A. (2020). Beitrag zur Qualitätssicherung in der additiven Fertigung individueller Produkte aus CoCr-Legierungen: Vol. 2020,42. Shaker Verlag.

Tinkloh, S. R., Wu, T., Tröster, T., &; Niendorf, T. (2020). A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures. Composite Structures, 238, Article 111926.https://doi.org/10.1016/j.compstruct.2020.111926 

Chalicheemalapalli Jayasankar, D., Stallmeister, T., Wang, Z., &; Tröster, T. (2020). MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED. In J. M. Hausmann, M. Siebert, A. von Hehl, &; K. A. Weidenmann (Eds.), Hybrid 2020 Materials and Structures (pp. 167–172).

Ahlers, D., &; Tröster, T. (2019). Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten”f: Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn.https://doi.org/10.2314/KXP:1695591887 

Pfeifer, F., Dietrich, A., Marten, T., Tröster, T., &; Nacke, B. (2019). Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process. In Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel (pp. 585–593). Luleå.

Striewe, J. A., Thomas, R., Fischer, F., Wiens, T., &; Tröster, T. (2019). Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung. Presented at the Tagung Werkstoffprüfung 2019, Sankt Augustin: DGM-Inventum GmbH .

Ahlers, D., &; Tröster, T. (2019). Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM.

Camberg, A. A., &; Hielscher, C. (2019). A holistic approach to the lightweight design of tailored structural components using the example of a hybrid A-pillar. In Aachen Body Engineering Days 2019. Aachen.

Camberg, A. A., &; Tröster, T. (2019). Challenges in fracture modeling under non-isothermal forming conditions using the example of a new forming process for aluminum blanks. In 26. Sächsische Fachtagung Umformtechnik. Dresden.

Tinkloh, S. R., Wu, T., Tröster, T., &; Niendorf, T. (2019). A micromechanical based finite element simulation of process induced residual stresses in metal-CFRP-hybrid structures. Presented at the 22nd International Conference on Composite Structures (ICC) and 1st Chinese Conference on Composite Structures (CCC), Wuhan.

Camberg, A. A., Tröster, T., Bohner, F., &; Tölle, J. (2019). Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications. IOP Conference Series: Materials Science and Engineering, 651, 012057.https://doi.org/10.1088/1757-899X/651/1/012057 

Akbulut Irmak, E. F., &; Tröster, T. (2019). Fracture prediction of additively manufactured AlSi10Mg materials. Procedia Structural Integrity, 190–197.https://doi.org/10.1016/j.prostr.2019.12.101 

Akbulut Irmak, E. F., Hanses, J., Schweizer, S., &; Tröster, T. (2019). Modeling the Energy Absorption Characteristics of Wood Crash Elements. 12th European LS-DYNA Conference, Koblenz.

Marten, T., &; Tröster, T. (2019). Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, 0, Verlag und Vertriebsgesellschaft mbH.

Triebus, M., Bienia, S., Marten, T., Tröster, T., &; Dröder, K. (2019). Press Hardening Integrated Structuring for Hybrid Components. Presented at the 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden: Verlag Wissenschaftliche Scripten.

Camberg, A. A., Stratmann, I., &; Tröster, T. (2019). TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES. In Technologies for economical and functional lightweight design. Berlin, Heidelberg.https://doi.org/10.1007/978-3-662-58206-0_12 

Stallmeister, T., Chalicheemalapalli Jayasankar, D., Wang, Z., &; Tröster, T. (2019). Self-sealing tool concept for RTM-processes. 22nd International Conference on Composite Materials (ICCM22 2019), Melbourne .

Stallmeister, T., Chalicheemalapalli Jayasankar, D., Wang, Z., &; Tröster, T. (2019). Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse. Tagung Werkstoffprüfung 2019, Neu-Ulm.

Opdemom, H. (2019). Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen: Vol. 2019,35. Shaker Verlag.

Stolzenburg, M. P. (2019). Experimental Basis for an Orthotropic Failure Model for Application in Crash Simulation.https://doi.org/10.17619/UNIPB/1-572 

Camberg, A. A., Striewe, M., Tröster, T., Bohner, F., &; Tölle, J. (2019). Investigation of ductility and fracture behavior of EN AW-5182  at non-isothermal forming conditions. 5th MATFEM Conference. 5th MATFEM Conference, Schloss Hohenkammer.

Striewe, J. A., Tröster, T., Kowatz, J., Meschut, G., Grothe, R., &; Grundmeier, G. (2019). Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. Europäische Forschungsgesellschaft für Blechverarbeitung.

Grothe, R., Striewe, J. A., Kowatz, J., Grundmeier, G., Tröster, T., &; Meschut, G. (2019). Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. 39. EFB-Kolloquium, Bad Boll .

Camberg, A. A., Tröster, T., Sotirov, N., Tölle, J., &; Bohner, F. (2018). Investigation of ductility and damage characteristics of EN AW-5182  at non-isothermal forming conditions. In Materials Science and Engineering (MSE) Congress 2018. Darmstadt.

Claes, L., Zeipert, H., Koppa, P., Tröster, T., &; Henning, B. (2018). Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck.

Camberg, A. A., Engelkemeier, K., Dietrich, J., &; Heggemann, T. (2018). Top-down design of tailored fiber-metal laminates. Lightweight Design Worldwide, 11(2), 24–29.https://doi.org/10.1007/s41777-018-0004-1 

Weiß-Borkowski, N., Lian, J., Camberg, A. A., Tröster, T., Münstermann, S., Bleck, W.,https://doi.org/10.1063/1.5035024__Richter, H. (2018). Forming limit curves ofhttps://doi.org/10.1063/1.5035024__determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models.https://doi.org/10.1063/1.5035024 

Tasdemirci, A., Akbulut Irmak, E. F., Guzel, E., Tuzgel, F., Yucesoy, A., Sahin, S., &; Guden, M. (2018). Crushing behavior and energy absorption performance of a bio-inspired metallic structure: Experimental and numerical study. Thin-Walled Structures, 547–555.https://doi.org/10.1016/j.tws.2018.07.051 

Camberg, A. A., &; Tröster, T. (2018). Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures. In HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. Bremen: DGM - Deutsche Gesellschaft für Materialkunde e.V.

Ahlers, D., &; Tröster, T. (2018). Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. Presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt.

Wang, Z., &; Tröster, T. (2018). Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding. Presented at the 21th International Conference on Composite Structures (ICC), Bologna, Italy.

Triebus, M., Tröster, T., Camberg, A. A., Bienia, S., &; Dröder, K. (2018). Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures. In 15. Deutsches LS-Dyna Forum. Bamberg.

Camberg, A. A., Tröster, T., Schneidt , A., Sotirov , N., &; Tölle, J. (2018). The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming. In 15. Deutsches LS-Dyna Forum. Bamberg.

Camberg, A. A. (2018). Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage von Gesamtfahrzeugsimulationen. Carbon Composites Magazin, (2), 15–16.

Schweizer, S., &; Tröster, T. (2018). Holz als Werkstoff im Automobil. 2. Siegener Leichtbaukolloquium, Siegen.

Wang, Z., &; Tröster, T. (2018). Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess. Presented at the 2. Siegener Leichtbaukolloquium, Siegen.

Camberg, A. A., Bohner, F., Tölle, J., Schneidt, A., Meiners, S., &; Tröster, T. (2018). Formability enhancement of EN AW-5182https://doi.org/10.1088/1757-899x/418/1/012018__aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models. IOP Conference Series: Materials Science and Engineering.https://doi.org/10.1088/1757-899x/418/1/012018 

Schumacher, C., Schöppner, V., &; Gnaase, S. (2018). Processing Short Fiber-reinforced Polymers in the Fused Deposition Modeling Process. Proceedings of the 29th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Solid Freeform Fabrication.

Niewel, J. (2018). Untersuchungen zur induktiven Erwärmung im Warmformprozess : Vol. 2018,31. Shaker Verlag.