Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.”https://doi.org/10.4028/p-5fxp53__Key Engineering Materials 926 (2022): 1457–67.https://doi.org/10.4028/p-5fxp53 .
LibreCat: /record/32869
DOI: 10.4028/p-5fxp53

Triebus, Marcel, Moritz Ostermann, Thomas Tröster, and Ilona Horwath. “Advanced Automotive Components by Fiber-Metal-Laminates.” In Materials in Car Body Engineering - Bad Nauheim, 2022.
LibreCat: /record/32871

Ostermann, Moritz, Julian Grenz, Marcel Triebus, Felipe Cerdas, Thorsten Marten, Thomas Tröster, and Christoph Herrmann. “Integrating Future Energy, Material and Production Scenarios in Life Cycle Engineering of Automotive Lightweight Structures.” In Proceedings of the 17th Conference on Sustainable Development of Energy, Water and Environment Systems. Paphos, Cyprus, 2022.
LibreCat: /record/34085

Ostermann, Moritz, Jonathan Behm, Thorsten Marten, Thomas Tröster, Johannes Weyer, Kay Cepera, and Fiabian Adelt. “Individualisierung Des ÖPNV - Integration Technischer Und Sozialer Dimensionen Nachhaltiger Mobilität.” In 14. Wissenschaftsforum Mobilität. Duisburg, Germany, 2022.
LibreCat: /record/32875

Delp, Alexander, Jonathan Freund, Shuang Wu, Ronja Scholz, Miriam Löbbecke, Jan Haubrich, Thomas Tröster, and Frank Walther. “Influence of Laser-Generated Surface Micro-Structuring on the Intrinsically Bonded Hybrid System CFRP-EN AW 6082- on Its Corrosion Properties.”https://doi.org/10.1016/j.compstruct.2022.115238__Composite Structures 285 (2022).https://doi.org/10.1016/j.compstruct.2022.115238 .
LibreCat: /record/30510
DOI: 10.1016/j.compstruct.2022.115238

Pfeifer, Florian, André Jungeilges, and Jonathan Behm. “Strom Statt Gas: Nachhaltige Herstellung von Karosseriebauteilen.” Transforming Economies, 2022.
LibreCat: /record/49323

Merten, Mathias, Thomas Klöppel, André Haufe, Maximilian Alexander Kaiser, Jan-Niklas Wesendahl, and Stefan Konrad. “Gekoppelte Simulation des resistiven Schnellerwärmens für Fertigungsprozesse mit integrierter Wärmebehandlung am Beispiel der Titanlegierung Ti-6Al-4V.” In Workshop Warmblechumformung, edited by Marion Merklein, Vol. 17. Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 17. Erlanger Workshop Warmblechumformung. Erlangen: Lehrstuhl für Fertigungstechnologie, 2022.
LibreCat: /record/49424

Kaiser, Maximilian Alexander, Pawel Rockicki, Fabian Höschen, Jan-Niklas Wesendahl, Stefan Konrad, Thomas Meyer, Thorsten Marten, and Thomas Tröster. “Heat Transfer Coefficient Investigation for Hot Die Quenching Process of Ti-6Al-4V Alloy,” 2022.
LibreCat: /record/49433

Kaiser, Maximilian Alexander, Jan-Niklas Wesendahl, and Thomas Meyer. “Isothermal Hot Forming of Titanium Sheet Metal - From Parameter Identification to Custom Parts,” n.d.
LibreCat: /record/49435

Bödger, Christian, Christian Weiss, Ekkehard Schiefer, Daniel Heussen, and Constantin Haefner. “Evaluation of the Ecological Footprint for Parts from AlSi10Mg Manufactured by Laser Powder Bed Fusion.” In Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2022.
LibreCat: /record/50744

Triebus, Marcel, Alexander Reitz, Olexandr Grydin, Julian Grenz, Andreas Schneidt, Rüdiger Erhardt, Thomas Tröster, and Mirko Schaper. “Forming Simulation of Tailored Press Hardened Parts.” In 13th European LS-DYNA Conference 2021, 2021.
LibreCat: /record/28440

Tröster, Thomas, Florian Pfeifer, Bernard Nacke, and André Dietrich. Großserientaugliche induktive Platinenerwärmung für den Warmformprozess. Vol. 38. FOSTA-Berichte. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat: /record/28461

Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “Development of a Submodel Technique for FFT-Based Solvers in Micromechanical Analysis,” 2021.
LibreCat: /record/21442

Camberg, Alan Adam, Thomas Tröster, and Clemens Latuske. “Development of a Hybrid Crash-Relevant Car Body Component with Load-Adapted Thickness Properties: Design, Manufacturing and Testing.”https://doi.org/10.1007/978-3-662-62924-6_28__Springer, 2021.https://doi.org/10.1007/978-3-662-62924-6_28 .
LibreCat: /record/20857
DOI: https://doi.org/10.1007/978-3-662-62924-6_28

Camberg, Alan Adam, Thomas Tröster, Nils Wingenbach, Christianhttps://doi.org/10.1007/978-3-662-62924-6_30__Hielscher, and Julian Grenz. “A New Numerical Method for Potential Anaylsis and Design of Hybrid Components from Full Vehicle Simulations: Implementation and Component Design.”https://doi.org/10.1007/978-3-662-62924-6_30__Springer, 2021.https://doi.org/10.1007/978-3-662-62924-6_30 .
LibreCat: /record/20858
DOI: https://doi.org/10.1007/978-3-662-62924-6_30

Triebus, Marcel, Jan Gierse, Thorsten Marten, and Thomas Tröster. “A New Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions.”https://doi.org/10.1088/1757-899x/1157/1/012052__IOP Conference Series: Materials Science and Engineering, 2021.https://doi.org/10.1088/1757-899x/1157/1/012052 .
LibreCat: /record/22518
DOI: 10.1088/1757-899x/1157/1/012052

Linnig, Caterina, and Thomas Tröster. Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Osnabrück: Deutsche Bundesstiftung Umwelt (DBU), 2021.
LibreCat: /record/29807

Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang Zinn, and Thomas Niendorf. “Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components.”https://doi.org/10.3390/met11020335__Metals, 2021.https://doi.org/10.3390/met11020335 .
LibreCat: /record/24131
DOI: 10.3390/met11020335

Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis.”https://doi.org/10.3390/met11010156__Metals, 2021.https://doi.org/10.3390/met11010156 .
LibreCat: /record/21064
DOI: 10.3390/met11010156

Magnier, A., T. Wu, Steffen Rainer Tinkloh, Thomas Tröster, B. Scholtes, and T. Niendorf. “On the Reliability of Residual Stress Measurements in Unidirectional Carbon Fibre Reinforced Epoxy Composites.”https://doi.org/10.1016/j.polymertesting.2021.107146__Polymer Testing, 2021.https://doi.org/10.1016/j.polymertesting.2021.107146 .
LibreCat: /record/24130
DOI: 10.1016/j.polymertesting.2021.107146