Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., &; Tröster, T. (2017). Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating. Presented at the 5th International Conference on Steels in Cars and Trucks, Noordwijkerhout/Amsterdam.

Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., &; Tröster, T. (2017). Effects of Holes in Blanks for Press Hardening Process due to Induction Heating. Presented at the XVIII International UIE-Congress Electrotechnologies for Material Processing, Hannover.

Reuter, C., Sauerland, K.-H., &; Tröster, T. (2017). Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading. Composite Structures, 33–44.https://doi.org/10.1016/j.compstruct.2017.04.052 

Reuter, C., &; Tröster, T. (2017). Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact. Thin-Walled Structures, 117, 1–9.https://doi.org/10.1016/j.tws.2017.03.034 

Striewe, J. A., Reuter, C., Sauerland, K.-H., &; Tröster, T. (2017). Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites. Thin-Walled Structures, 501–508.https://doi.org/10.1016/j.tws.2017.11.011 

Weiß-Borkowski, N., Lian, J., Marten, T., Tröster, T., Münstermann, S., &; Bleck, W. (2017). Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model. In Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017.https://doi.org/10.1063/1.5007961 

Schweizer, S., Becker-Staines, A., &; Tröster, T. (2017). Separation of Hybrid Structures for the Reclaim of their Single Components. Key Engineering Materials, 568–575.https://doi.org/10.4028/www.scientific.net/kem.742.568 

Ahlers, D., &; Tröster, T. (2017). Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V. Presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.

Kutz, P., Wang, Z., Ellouz, M., Kordisch, T., &; Tröster, T. (2017). Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. Presented at the 2nd Conference &; Exhibition on Light Materials, Bremen.

Weiß Borkowski, N. (2017). Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22.

Wang, Z., Kutz, P., &; Tröster, T. (2017). Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. Presented at the 15. Bielefelder Werkstofftag, Bielefeld.

Weiß Borkowski, N., Camberg, A. A., Tröster, T., &; Marten, T. (2017). Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH. Presented at the 4th MATFEM Conference, Schloss Hohenkammer.

Weiß Borkowski, N., Marten, T., Tröster, T., &; Schulz Beenken, A. (2017). Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. Presented at the 6th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CH 2017), Atlanta, USA.

Ahlers, D., &; Tröster, T. (2017). Materialkombinationen in der additive Fertigung. Presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt.

Ahlers, D., &; Tröster, T. (2017). Aspekte der Produktentwicklung in der additiven Fertigung. Presented at the Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil, Nördlingen.

Frantz, M. M. (2017). Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen: Vol. 2017,25. Shaker Verlag.

Ahlers, D., Koppa, P., Hengsbach, F., Gloetter, P., Altmann, A., Schaper, M., &; Tröster, T. (2017). Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.

Hengsbach, F., Koppa, P., Duschik, K., Holzweissig, M. J., Burns, M., Nellesen, J., Tillmann, W., Tröster, T., Hoyer, K.-P., &; Schaper, M. (2017). Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials &; Design, 136–142.https://doi.org/10.1016/j.matdes.2017.07.046 

Weidenmann, K. A., Pottmeyer, F., Wang, Z., Tröster, T., Meiners, D., Zinn, C., Schaper, M., &; Gonzalez, J. S. (2017). Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites, Article 244.https://doi.org/10.1504/ijautoc.2016.10005303 

Marten, T. (2017). Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen. Shaker Verlag.