Bünder, Dirk, and Moritz Neukötter. Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells, 2023.
LibreCat: /record/42999

Al Mamoun, Mohamed, and Moritz Neukötter. Evaluation of Self-Built Low-Budget Particle Sensors (Study Project), 2023.
LibreCat: /record/42995

Kletetzka, Ivo, Maren Kosanke, Dennis Meinderink, Vanessa Neßlinger, Guido Grundmeier, and Hans-Joachim Schmid. “Influence of the Filler–Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser-Sintered Parts Built with Polyamide–Glass Bead Dry Blends.”https://doi.org/10.1007/s40964-023-00501-z__Progress in Additive Manufacturing, 2023.https://doi.org/10.1007/s40964-023-00501-z .
LibreCat: /record/46815
DOI: 10.1007/s40964-023-00501-z

Kletetzka, Ivo, Maren Kosanke, Dennis Meinderink, Vanessa Neßlinger, Guido Grundmeier, and Hans-Joachim Schmid. “Influence of the Filler Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser Sintered Parts Built with Polyamide Glass Bead Dry Blends.” Research Square Platform LLC, 2023.
LibreCat: /record/43049

Kletetzka, Ivo. “Tensile Testing for Polymer AM - Best Pratice at the DMRC,” 2023.
LibreCat: /record/45783

Klippstein, Sven Helge, Ivo Kletetzka, Ilknur Sural, and Hans-Joachim Schmid. “Influence of a Prolonged Shelf Time on P Laser Sintering Powder and Resulting Part Properties.”https://doi.org/10.1007/s00170-023-11243-1__The International Journal of Advanced Manufacturing Technology , 2023.https://doi.org/10.1007/s00170-023-11243-1 .
LibreCat: /record/43046
DOI: https://doi.org/10.1007/s00170-023-11243-1

Sajadi, Said. Charakterisierung und Bewertung von flammgeschützten P Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess, 2023.
LibreCat: /record/46861

Menge, Dennis, Dennis Milaege, Kay-Peter Hoyer, Hans-Joachim Schmid, and Mirko Schaper. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.”https://doi.org/10.14361/9783839463772-007__In Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer. Bielefeld, Germany: transcript Verlag, 2023.https://doi.org/10.14361/9783839463772-007 .
LibreCat: /record/46870
DOI: 10.14361/9783839463772-007

Rüther, Moritz Johannes, Sven Helge Klippstein, and Hans-Joachim Schmid. “Correlation between SLS-Powder Processability and Particle Properties .” In PARTEC International Congress on Particle Technology - Book of Abstracts, 172–76. Düsseldorf: VDI Verlag GmbH, 2023.
LibreCat: /record/47626

Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, Vol. 34. Austin: Laboratory for Freeform Fabrication and University of Texas, 2023.
LibreCat: /record/46764

Fröde, Fabian , Temistoclehttps://doi.org/10.1016/j.jaecs.2023.100191__Grenga, Heinzhttps://doi.org/10.1016/j.jaecs.2023.100191__Pitsch, Sophie Dupont, Reinhold Kneer, Ricardo Tischendorf, Orlando Massopo, and Hans-Joachim Schmid, eds. Large Eddy Simulation of Iron Oxide Formation in a Laboratory Spray Flame. Applications in Energy and Combustion Science. Elsevier, 2023.https://doi.org/10.1016/j.jaecs.2023.100191 .
LibreCat: /record/51136
DOI: https://doi.org/10.1016/j.jaecs.2023.100191

Massopo, Orlando, Ricardo Tischendorf, Hans-Joachim Schmid, Fabian Fröde, Temistocle Grenga, Heinz Pitsch, Malte Bieber, Manuel Reddemann, and Reinhold Kneer. “Influence of Atomization on the Particle Formation in Spray Flame Pyrolysis (Presentation),” 2023.
LibreCat: /record/51147

Massopo, Orlando, Hans-Joachim Schmid, Munko Gonchikzhapov, and Tina Kasper. “Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster),” 2023.
LibreCat: /record/51145

Massopo, Orlando, Ricardo Tischendorf, Hans-Joachim Schmid, Fabian Fröde, Heinz Pitsch, Manuel Reddemann, Temistocle Grenga, and Reinhold Kneer. “Einfluss Der Zerstäubung Auf DiePartikelbildung Bei Der Sprayflammenpyrolyse (Vortrag),” 2023.
LibreCat: /record/51142

Beimdiek, Janis, Sascha Schiller, and Hans-Joachim Schmid. “Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster).” Paderborn, 2023.
LibreCat: /record/51726

Elma, Benjamin, and Janis Beimdiek. Investigations on Aerosol Synthesis of Polymer Particles. Paderborn, 2023.
LibreCat: /record/51721

Beimdiek, Janis, Sascha Schiller, and Hans-Joachim Schmid. “Entrained Flow SCR Using an In-Situ Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System.” Düsseldorf: VDI Verlag, 2023.
LibreCat: /record/51727

Tschöpe, Jan-Cedric Philipp Balthasar. Selektives Lasersintern mit glasverstärkten Kunstsoff-Dry-Blends Analyse von Verarbeitbarketi und Bauteileigenschaften im Vergleich zu partikelgefüllten Kunststoffpulvern. Paderborn, 2023.
LibreCat: /record/52502

Josch, Sebastian. Rheologische Charakterisierung von Frischbetonf: Entwicklung eines adaptiven Rheometers und Untersuchung wandgleitunterdrückender Messgeometrien. Paderborn, 2023.https://doi.org/10.17619/UNIPB/1-1859 .
LibreCat: /record/52500
DOI: 10.17619/UNIPB/1-1859

Gräßer, Melanie. Numerical Computation of Capillary Bridges between Directly Resolved Rough Interfaces, 2023.https://doi.org/10.17619/UNIPB/1-1691 .
LibreCat: /record/52499
DOI: 10.17619/UNIPB/1-1691