D. Bünder and M. Neukötter, Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells. 2023.

M. Al Mamoun and M. Neukötter, Evaluation of self-built low-budget particle sensors (Study Project). 2023.

I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends,”10.1007/s40964-023-00501-z__Progress in Additive Manufacturing, 2023, doi:10.1007/s40964-023-00501-z .

I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends.” Research Square Platform LLC, 2023.

I. Kletetzka, “Tensile Testing for Polymer AM - Best Pratice at the DMRC,” presented at the Mobility goes Additve, Berlin, 2023.

S. H. Klippstein, I. Kletetzka, I. Sural, and H.-J. Schmid, “Influence of a prolonged shelf time on P laser sintering powder and resulting part properties,”https://doi.org/10.1007/s00170-023-11243-1__The International Journal of Advanced Manufacturing Technology , 2023, doi:https://doi.org/10.1007/s00170-023-11243-1 .

S. Sajadi, Charakterisierung und Bewertung von flammgeschützten P Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess. 2023.

D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, and M. Schaper, “Case Study IV: Individualized Medical Technology using Additive Manufacturing,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, I. Horwath and S. Schweizer, Eds. Bielefeld, Germany: transcript Verlag, 2023.

M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Correlation between SLS-Powder processability and particle properties ,” in PARTEC International Congress on Particle Technology - Book of Abstracts, Nürnberg, 2023, pp. 172–176.

I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, vol. 34.

F. Fröde et al., Eds., Large eddy simulation of iron oxide formation in a laboratory spray flame. Elsevier, 2023.

O. Massopo et al., “Influence of atomization on the particle formation in spray flame pyrolysis (Presentation),” presented at the International Congress of Particle Technology, Nürnberg, 2023.

O. Massopo, H.-J. Schmid, M. Gonchikzhapov, and T. Kasper, “Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster),” presented at the European Aerosol Conference, Málaga, Spain , 2023.

O. Massopo et al., “Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag),” presented at the Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn, 2023.

J. Beimdiek, S. Schiller, and H.-J. Schmid, “Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster),” presented at the Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023, Paderborn, 2023.

B. Elma and J. Beimdiek, Investigations on Aerosol Synthesis of Polymer Particles. Paderborn, 2023.

J. Beimdiek, S. Schiller, and H.-J. Schmid, “Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system,” presented at the International Congress on Particle Technology | PARTEC 2023, Nürnberg, 2023.

J.-C. P. B. Tschöpe, Selektives Lasersintern mit glasverstärkten Kunstsoff-Dry-Blends Analyse von Verarbeitbarketi und Bauteileigenschaften im Vergleich zu partikelgefüllten Kunststoffpulvern. Paderborn, 2023.

S.  Josch, Rheologische Charakterisierung von Frischbetonf: Entwicklung eines adaptiven Rheometers und Untersuchung wandgleitunterdrückender Messgeometrien. Paderborn, 2023.

M. Gräßer, Numerical Computation of Capillary Bridges between Directly Resolved Rough Interfaces. 2023.