Abrishamchian, Farisoroosh, et al. “Feature Model Approach For Managing Variability of Dynamic Behavior Models in Mechatronic Systems.” Proceedings of the ASME 2015 International Mechanical Engineering Congress &; Exposition, ASME, 2015.

Bertelsmeier, Fabian, and Ansgar Trächtler. “Decentralized Controller Reconû01guration Strategies for Hybrid System Dynamics Based on Product-Intelligence.” 20th IEEE International Conference on Emerging Technologies and Factory Automation, 2015.

Abdelgawad, Kareem, et al. “Flexible Operation Workflow of a Driving Simulation Center for ADAS Development.” New Developments in Driving Simulation Design and Experiments, Driving Simulation Conference, 2015.

Hassan, Bassem, et al. “ARTiST - An Augmented Reality Testbed for Intelligent Technical Systems.” Virtual, Augmented and Mixed Reality VAMR 2015 Held as Part of HCI International 2015, edited by Randall Shumaker and Stephanie Lackey, Springer International Publishing Switzerland, 2015, pp. 457–69.

Berssenbrügge, Jan, et al. “Visualization of Headlight Illumination for the Virtual Prototyping of Light-Based Driver Assistance Systems.” Proceedings of the ASME 2015 International Design Engineering Technical Conferences &; Computers and Information in Engineering Conference, 2015.

Krüger, Martin, and Ansgar Trächtler. “Parametrische Modellordnungsreduktion Für Hierarchische Selbstoptimierende Systeme.” At-Automatisierungstechnik, vol. 63, no. 8, 2015, pp. 633–45.

Bertelsmeier, Fabian, et al. “Produkt- Und Lastabhängiges Dezentrales Motormanagement Für Die Fördertechnik: Anforderungen, Design Und Applikation .” Automation 2015, VDI-Verlag, 2015.

Pai, Arathi, et al. “Modelling the Constitutive Behaviour of Martensite and Austenite in Shape Memory Alloys Using Closed-Form Analytical Continuous Equations.” 7th ECCOMAS Thematic Conference on Smart Structures and Materials - SMART, 2015.

Damerow, Ulf-Hendrik, et al. “Intelligente Biegeverfahren.” Wt Werkstattstechnik Online, vol. 6–2015, 2015, pp. 427–32.

Abdelgawad, Kareem, et al. “A Modular Architecture of an Interactive Simulation and Training Environment for Advanced Driver Assistance Systems.” International Journal On Advances in Software, vol. 8, IARIA, 2015, pp. 247–61.

Shareef, Zeeshan, et al. “Design and Control of Cooperative Ball Juggling Delta Robots without Visual Guidance.” Robotica, 2015, pp. 1–17.

Shareef, Zeeshan. Path Planning and Trajectory Optimization of Delta Parallel Robot. Vol. 345, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015.

Jähn, Claudius, et al. “Automatische Ableitung Geometrischer Eigenschaften von Bauteilen Aus Dem 3-D-Polygonmodell.” 12. Paderborner Workshop Augmented &; Virtual Reality in Der Produktentstehung, vol. 342, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 107–20.

Berssenbrügge, Jan, et al. “Visualisierung von Scheinwerfersystemen Für Das Virtual Prototyping von Lichtbasierten Fahrerassistenzsystemen.” 12. Paderborner Workshop Augmented &; Virtual Reality in Der Produktentstehung, vol. 342, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 231–45.

Berssenbrügge, Jan, et al. “Anbindung Des Virtuellen Prototypen an Die Partialmodelle Intelligenter Technischer Systeme.” 12. Paderborner Workshop Augmented &; Virtual Reality in Der Produktentstehung, vol. 342, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 65–78.

Zimmermann, Daniel, et al. “Entwicklung Eines Prädiktiven Motion-Cueing-Verfahrens Für Den ATMOS-Fahrsimulator .” 12. Paderborner Workshop Augmented &; Virtual Reality in Der Produktentstehung, vol. 342, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 261–72.

Bertelsmeier, Fabian, et al. “Online-Rekonû01guration Hybrider Regelkreise in Abhängigkeit Variierender Produkteigenschaften.” Tagungsband Mechatronik 2015, VDI Mechatronik, 2015, pp. 97–102.

Lochbichler, Matthias, et al. “Systematische Wahl Der Modellierungstiefe Im Entwurfsprozess Mechatronischer Systeme Am Beispiel Eines Geldautomaten.” Tagungsband Mechatronik, VDI Mechatronik, 2015.

Koke, Isabel, et al. “Tutorenprogramm Und Vertiefungsberatung Stellen Weichen in Entscheidenden Phasen Des Student Life-Cycles in Maschinenbaustudiengängen.”  44. Jahrestagung Der Deutschen Gesellschaft Für Hochschuldidaktik - Hochschuldidaktik Im Dialog, Paderborn, 2015.

Michael, Jan, et al. “Modellbasierte Mehrzieloptimierung Zur Integration von Hausgeräten in SmartGrids.” VDI Mechatronik 2015 Tagungsband, VDI Mechatronik, 2015, pp. 245–50.

Wuthishuwong, Chairit, et al. “Safe Trajectory Planning for Autonomous Intersection Management by Using Vehicle to Infrastructure Communication.” EURASIP Journal on Wireless Communications and Networking, vol. 33, no. 1, 2015.

Lankeit, Christopher, et al. “Challenges in Requirements Engineering for Mechatronic Systems – Problem Analysis and First Approach.” Jurnal Teknologi, vol. 76, no. 4, 2015.

Lankeit, Christopher, et al. “From Goals to Systems via Technical Requirements and Physical Models - Design of an Intelligent Cash Handling System.” Proceedings, IEEE, 2015.

Pai, Arathi, et al. “Real-Time Compatible Phenomenological Modelling of the Austenitic Phase in Shape Memory Alloys as an Example for Modelling of Materials with Repeatable Non-Linear Characteristics.” IFAC 1st Conference on Modelling, Identification and Control of Nonlinear Systems - MICNON, 2015.

Osmic, Semir. Flachheitsbasierte Methode zum stoßfreien Umschalten von Reglerstrukturen. 2015.

Lauter, Christian, et al. “Influences of Process Parameters on the Mechanical Properties of Hybrid Sheet Metal-FRP-Composites Manufactured by Prepreg Press Technology.” 20th International Conference on Composite Materials, Copenhagen, 2015.

Frieben, Tanja, and Ansgar Trächtler. “Virtual Commissioning by Means of an Adaptive Selection of the Modeling Depth.” Proceedings of the ASME 2014 International Mechanical Engineering Congress &; Exposition IMEC, Montreal, Québec, Canada, 2014.

Kruse, Daniel, et al. “Methodology for a Partly Automated Parameter Identification for the Validation of Multi-Domain Models.” Proceedings of the ASME 2014 International Mechanical Engineering Congress &; Exposition IMECE 2014, 2014.

Lochbichler, Matthias, et al. “Dynamic Behavior Models and Their Modeling Depth in the Design Process of Mechatronic Systems.” Proceedings of the ASME 2014 International Mechanical Engineering Congress &; Exposition IMECE 2014, 2014.

Kromov, Ivan, et al. “Ansätze Zur Regelung Eines Elektronischen Lastemulators Für Die Hardware-in-the-Loop-Simulation von Antriebsreglern Auf Leistungsebene.” SPS IPC Drives, 2014.

Shareef, Zeeshan, and Ansgar Trächtler. “Optimal Trajectory Planning for Robotic Manipulators Using Discrete Mechanics and Optimal Control.” Multi-Conference on Systems and Control (MSC) / 23rd Conference on Control Applications (CCA), IEEE, 2014.

Damerow, Ulf-Hendrik, et al. “Analysis of High Speed Bending Operations as Basis for Integrating Self-Correcting Components to Increase Process Reliability.” Procedia Engineering 81, Elsevier, 2014, pp. 831–36.

Krüger, Martin. “Parametrische Modellordnungsreduktion Für Hierarchische Selbstoptimierende Systeme.” Workshop GMA-Fachausschuss 1.30, 2014.

Al Qaisi, Imad, et al. “Subjective Evaluation of Different Motion Cueing Algorithms Implemented on ATMOS Driving Simulator.” Driving Simulation Conference 2014, 2014.

Wuthishuwong, Chairit, and Ansgar Trächtler. “Consensus Coordination for Multiple Autonomous Intersection Management.” Tagungsband 9. Dortmunder AutoTag, Technische Universität Dortmund, 2014.

Just, Viktor. Modellbasierte Analyse Und Regelungstechnische Maßnahmen Zur Optimierung Des Vereinzelungsvorgangs in Bankautomaten. Universitaetsbibliothek Paderborn, 2014.

Wuthishuwong, Chairit, and Ansgar Trächtler. “Stability of the Consensus in the Network of Multiple Autonomous Intersections Management.” Proc. 20th International Conference on Automation and Computing (ICAC), IEEE, 2014.

Shareef, Zeeshan, and Ansgar Trächtler. “Simultaneous Path Planning and Trajectory Optimization for Robotic Manipulators Using Discrete Mechanics and Optimal Control.” Robotica, 2014.

Wuthishuwong, Chairit, and Ansgar Trächtler. “Consensus Coordination in the Network of Autonomous Intersection Management.” Proc. 11th International Conference on Informatics in Control Automation and Robotics ICINCO, IEEE, 2014.

Flottmeier, Sarah, et al. “Sliding Mode and Continuous Estimation Techniques for the Realization of Advanced Control Strategies for Parallel Kinematics .” Proceedings of the 19th IFAC World Congress, 2014.

Kessler, Jan Henning, and Ansgar Trächtler. “Control of Pareto Points for Self-Optimizing Systems with Limited Objective Values.” The 19th IFAC World Congress, 2014.

Shareef, Zeeshan, and Ansgar Trächtler. “Joint Selection Criterion for Optimal Trajectory Planning for Robotic Manipulators Using Dynamic Programming.” 19th IFAC World Congress, 2014.

Pai, Arathi, et al. “Analyses of the Stress-Strain Behaviour of SMAs under Cyclical Loading Conditions – Implementation of a Novel Phenomenological Constitutive Model.” Posterbeitrag ICOMAT - International Conference on Martensitic Transformations, Juli 2014, Bilbao, Spanien, 2014.

Damerow, Ulf-Hendrik, et al., editors. Concept for a Self-Correcting Sheet Metal Bending Operation. Vol. Volume 15, Elsevier, 2014.

Shareef, Zeeshan, et al. “Design and Control of a Vertical Ball Juggling Delta Robot without Visual Guidance.” 13th International Conference on Intelligent Autonomous Systems, Springer-Verlag, 2014.

Abrishamchian, Farisoroosh, and Ansgar Trächtler. “Configuration of Mechatronic Systems Using Feature Models.” 2nd International Conference on System-Integrated Intelligence, Universität Bremen, 2014, pp. 27–34.

Schaermann, Waldemar, et al., editors. Selbstkorrigierende Biegeprozesse in Der Umformtechnik. VDI- Verlag, Düsseldorf, 2014.

Kessler, Jan Henning, et al. “Continuous Objective-Based Control for Self-Optimizing Systems with Changing Operation Modes.” 13th European Control Conference (ECC), 2014, pp. 2096–102.

Gausemeier, Jürgen, et al. Semantische Technologien Im Entwurf Mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten. Carl Hanser Verlag, 2014.

Krüger, Martin, et al. “Model-Based Design of Self-Correcting Forming Processes.” KoMSO Challenge Workshop Math for the Digital Factory, 2014.