Rozo Vasquez, Julian, Bahman Arian, Lukas Kersting, Frank Walther, Werner Homberg, and Ansgar Trächtler. “Detection of Phase Transformation during Plastic Deformation of Metastable Austenitic Steel AISI 304L by Means of X-Ray Diffraction Pattern Analysis.” Metals, 2023.
LibreCat: /record/44318

Borgert, Thomas, Dennis Milaege, Swetlana Schweizer, Werner Homberg, Mirko Schaper, and Thomas Tröster. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.”https://doi.org/10.1007/s12289-023-01785-w__International Journal of Material Forming 16, no. 6 (2023).https://doi.org/10.1007/s12289-023-01785-w .
LibreCat: /record/47536
DOI: 10.1007/s12289-023-01785-w

Rozo Vasquez, Julian, Bahman Arian, Lukas Kersting, Frank Walther, Werner Homberg, and Ansgar Trächtler. “Softsensor Model of Phase Transformation during Flow Forming of Metastable Austenitic Steel AISI 304L,” 2023.
LibreCat: /record/44316

Borgert, Thomas. Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten Recycling von Aluminiumschrotten, 2023.
LibreCat: /record/48072

Bathelt, Lukas, Eugen Djakow, Frederik Dahms, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Neuartiger Ansatz Zum Richten von Zwei- Und Dreidimensionalen Fehlern an Einem Federdraht.” In Ilmenauer Federntag 2023: Neueste Erkenntnisse Zu Funktion, Berechnung, Prüfung Und Gestaltung von Federn Und Werkstoffen. Ilmenau, Germany: ISLE Steuerungstechnik und Leistungselektronik, 2023.
LibreCat: /record/48001

Arian, Bahman, Werner Homberg, Lukas Kersting, Ansgar Trächtler, Julian Rozo Vasquez, and Frank Walther. “Cryogenic Reverse Flow Forming of AISI 304L.”https://doi.org/10.21741/9781644902479-219__In Materials Research Proceedings. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902479-219 .
LibreCat: /record/44314
DOI: 10.21741/9781644902479-219

Homberg, Werner, Bahman Arian, Viktor Arne, Thomas Borgert, Alexander Brosius, Peter Groche, Christoph Hartmann, et al. “Softsensors: Key Component of Property Control in Forming Technology.”https://doi.org/10.1007/s11740-023-01227-1__Production Engineering, 2023.https://doi.org/10.1007/s11740-023-01227-1 .
LibreCat: /record/48075
DOI: 10.1007/s11740-023-01227-1

Borgert, Thomas, Moritz Neuser, Eugen Wiens, Olexandr Grydin, Werner Homberg, and Mirko Schaper. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.”https://doi.org/10.21741/9781644902417-24__In Materials Research Proceedings, 25:187–94. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902417-24 .
LibreCat: /record/43031
DOI: 10.21741/9781644902417-24

Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.”https://doi.org/10.3390/jmmp7050169__Journal of Manufacturing and Materials Processing 7, no. 5 (2023).https://doi.org/10.3390/jmmp7050169 .
LibreCat: /record/47535
DOI: 10.3390/jmmp7050169

Vieth, Pascal, Thomas Borgert, Werner Homberg, and Guido Grundmeier. “Assessment of Mechanical and Optical Properties of Al 6060 Alloy Particles by Removal of Contaminants.”https://doi.org/10.1002/adem.202201081__Advanced Engineering Materials, 2022.https://doi.org/10.1002/adem.202201081 .
LibreCat: /record/33724
DOI: 10.1002/adem.202201081

Meschut, Gerson, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.”https://doi.org/10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100113 .
LibreCat: /record/34216
DOI: 10.1016/j.jajp.2022.100113

Borgert, Thomas, and Werner Homberg. “Energy Saving Potentials of an Efficient Recycling Process of Different Aluminum Rejects.”https://doi.org/10.1016/j.egyr.2022.01.027__Energy Reports 8 (2022): 399–404.https://doi.org/10.1016/j.egyr.2022.01.027 .
LibreCat: /record/29719
DOI: 10.1016/j.egyr.2022.01.027

Engemann, David, and Werner Homberg. “Hot Spinning of Cutting Blades for Food Industry.” Braga - Portugal, n.d.
LibreCat: /record/30292

Oesterwinter, Annika, Christian Wischer, and Werner Homberg. “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).”https://doi.org/10.3390/met12050869__Metals 12, no. 5 (2022).https://doi.org/10.3390/met12050869 .
LibreCat: /record/31360
DOI: 10.3390/met12050869

Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”https://doi.org/10.4028/p-1n6741__Key Engineering Materials 926 (2022): 1468–78.https://doi.org/10.4028/p-1n6741 .
LibreCat: /record/37647
DOI: 10.4028/p-1n6741

Heggemann, Thomas, Verena Psyk, Annika Oesterwinter, Maik Linnemann, Verena Kräusel, and Werner Homberg. “Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology.”https://doi.org/10.3390/met12040660__Metals 12, no. 4 (2022).https://doi.org/10.3390/met12040660 .
LibreCat: /record/30885
DOI: 10.3390/met12040660

Wiens, Eugen. Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften, 2022.
LibreCat: /record/42813

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.”https://doi.org/10.4028/p-3rk19y__Key Engineering Materials 926 (2022): 683–89.https://doi.org/10.4028/p-3rk19y .
LibreCat: /record/32412
DOI: 10.4028/p-3rk19y

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control.”https://doi.org/10.3390/met12010158__Metals 12, no. 1 (2022).https://doi.org/10.3390/met12010158 .
LibreCat: /record/29357
DOI: 10.3390/met12010158

Bathelt, Lukas, Fabian Bader, Eugen Djakow, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Innovative Assistance System for Setting up a Mechatronic Straightening Machine,”https://doi.org/10.4028/p-vs07w9__2022.https://doi.org/10.4028/p-vs07w9 .
LibreCat: /record/30263
DOI: https://doi.org/10.4028/p-vs07w9