Milaege D, Eschemann N, Hoyer K-P, Schaper M. Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion. Crystals. 2024;14(2). doi:10.3390/cryst14020117
LibreCat: /record/52738
DOI: 10.3390/cryst14020117

Voswinkel D. Application of a new strategy for time-efficient laser treatment of galvanized steel substrates to improve the adhesion properties. Journal of Manufacturing Processes. 2023;94:10-19. doi:/10.1016/j.jmapro.2023.03.056
LibreCat: /record/43371
DOI: /10.1016/j.jmapro.2023.03.056

Grydin O, Garthe K-U, Yuan X, et al. Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips. In: Broek S, ed. Light Metals 2023. The Minerals, Metals &; Materials Series. Springer Nature Switzerland; 2023:1031-1037. doi:10.1007/978-3-031-22532-1_137
LibreCat: /record/41959
DOI: 10.1007/978-3-031-22532-1_137

Pramanik S, Andreiev A, Hoyer K-P, et al. Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy. Powders. 2023;2(1):59-74. doi:10.3390/powders2010005
LibreCat: /record/41492
DOI: 10.3390/powders2010005

Slapáková M, Kihoulou B, Veselý J, et al. 3D-structure of intermetallic interface layer in Al–steel clad material. Vacuum. 2023;212. doi:10.1016/j.vacuum.2023.112043
LibreCat: /record/43441
DOI: 10.1016/j.vacuum.2023.112043

Haase M, Bieber M, Tasche F, et al. Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors. In: Kynast M, Eichmann M, Witt G, eds. Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023. Carl Hanser Verlag GmbH &; Co. KG; 2023.
LibreCat: /record/45360

Andreiev A, Hoyer K-P, Hengsbach F, et al. Powder bed fusion of soft-magnetic iron-based alloys with high silicon content. Journal of Materials Processing Technology. 2023;317. doi:10.1016/j.jmatprotec.2023.117991
LibreCat: /record/44078
DOI: 10.1016/j.jmatprotec.2023.117991

Pramanik S, Hoyer K-P, Schaper M. Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples. Rapid Prototyping Journal. 2023;29(6):1257-1269. doi:10.1108/rpj-06-2022-0190
LibreCat: /record/46503
DOI: 10.1108/rpj-06-2022-0190

Pramanik S, Milaege D, Hein M, Andreiev A, Schaper M, Hoyer K-P. An Experimental and Computational Modeling Study on Additively Manufactured MicroArchitectured Ti–24Nb–4Zr–8Sn HollowStrut Lattice Structures. Advanced Engineering Materials. 2023;25(14). doi:10.1002/adem.202201850
LibreCat: /record/46507
DOI: 10.1002/adem.202201850

Andreiev A, Hoyer K-P, Hengsbach F, Haase M, Schaper M. Powder Bed Fusion of Soft-Magnetic Iron-Silicon-Based Alloys: Advantages and Challenges. Published online 2023. doi:10.2139/ssrn.4369485
LibreCat: /record/46504
DOI: 10.2139/ssrn.4369485

Menge D, Milaege D, Hoyer K-P, Schmid H-J, Schaper M. Case Study IV: Individualized Medical Technology using Additive Manufacturing. In: Horwath I, Schweizer S, eds. Climate Protection, Resource Efficiency, and Sustainable Engineering. transcript Verlag; 2023. doi:10.14361/9783839463772-007
LibreCat: /record/46870
DOI: 10.14361/9783839463772-007

Pramanik S, Krüger JT, Schaper M, Hoyer K-P. Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution. Metallurgical and Materials Transactions A. Published online 2023. doi:10.1007/s11661-023-07186-7
LibreCat: /record/47122
DOI: 10.1007/s11661-023-07186-7

Pramanik S, Milaege D, Hein M, Hoyer K-P, Schaper M. Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach. Crystals. 2023;13(11). doi:10.3390/cryst13111592
LibreCat: /record/49107
DOI: 10.3390/cryst13111592

Bieber M, Haase M, Tasche F, Zibart A, Ponick B. Additively manufactured air-cooled lightweight rotor for an automotive electric motor. In: 2023 IEEE International Electric Machines &;amp; Drives Conference (IEMDC). IEEE; 2023. doi:10.1109/iemdc55163.2023.10238918
LibreCat: /record/49774
DOI: 10.1109/iemdc55163.2023.10238918

Borgert T, Neuser M, Wiens E, Grydin O, Homberg W, Schaper M. Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy. In: Materials Research Proceedings. Vol 25. Materials Research Forum LLC; 2023:187-194. doi:10.21741/9781644902417-24
LibreCat: /record/43031
DOI: 10.21741/9781644902417-24

Neuser M, Schaper M, Grydin O. Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process. Journal of Manufacturing and Materials Processing. 2023;7(4). doi:10.3390/jmmp7040132
LibreCat: /record/52405
DOI: 10.3390/jmmp7040132

Borgert T, Neuser M, Hoyer K-P, Homberg W, Schaper M. Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials Processing. 2023;7(5). doi:10.3390/jmmp7050169
LibreCat: /record/47535
DOI: 10.3390/jmmp7050169

Grydin O, Neuser M, Schaper M. Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy. In:     Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_61
LibreCat: /record/52406
DOI: 10.1007/978-3-031-41341-4_61

Krüger JT, Hoyer K-P, Hengsbach F, Schaper M. Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies. Journal of Materials Research and Technology. 2022;19:2369-2387. doi:10.1016/j.jmrt.2022.06.006
LibreCat: /record/32330
DOI: 10.1016/j.jmrt.2022.06.006

Haase M, Tasche F, Bieber M, Zibart A. Innovative Leichtbau- Und Kühlungskonzepte Für Elektrische Maschinen Durch Additive  Fertigung (ILuKadd3D). Vol Heft 1526. Forschungsvereinigung Antriebstechnik e.V.; 2022.
LibreCat: /record/34020

Krüger JT. Adjustment of AgCaLa Phases in a FeMn Matrix via LBM for Implants with Adapted Degradation. crystals. 2022;12. doi:https://doi.org/10.3390/cryst12081146
LibreCat: /record/33497
DOI: https://doi.org/10.3390/cryst12081146

CIESLAR M, KIVSKÁ B, KRÁLÍK R, et al. HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY. In: METAL 2022 Conference Proeedings. TANGER Ltd.; 2022. doi:10.37904/metal.2022.4438
LibreCat: /record/36335
DOI: 10.37904/metal.2022.4438

BAJTOSOVÁ L, Grydin O, STOLBCHENKO M, et al. Phase identification in twin-roll cast Al-Li alloys. In: METAL 2022 Conference Proeedings. TANGER Ltd.; 2022. doi:10.37904/metal.2022.4437
LibreCat: /record/36339
DOI: 10.37904/metal.2022.4437

Abdelaal O, Hengsbach F, Schaper M, Hoyer K-P. LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio. Materials. 2022;15(12). doi:10.3390/ma15124072
LibreCat: /record/32188
DOI: 10.3390/ma15124072

Voswinkel D, Striewe JA, Grydin O, et al. Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications. Advanced Composite Materials. Published online 2022:1-16. doi:10.1080/09243046.2022.2143746
LibreCat: /record/34097
DOI: 10.1080/09243046.2022.2143746

Pramanik S, Tasche F, Hoyer K-P, Schaper M. Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study. Magnetism. 2022;2:88-104. doi:10.3390/magnetism2020007
LibreCat: /record/30519
DOI: 10.3390/magnetism2020007

Reitz A, Grydin O, Schaper M. Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel. Metallurgical and Materials Transactions A. 2022;53(8):3125-3142. doi:10.1007/s11661-022-06732-z
LibreCat: /record/36327
DOI: 10.1007/s11661-022-06732-z

Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials. 2022;13(4):185. doi:10.3390/jfb13040185
LibreCat: /record/40154
DOI: 10.3390/jfb13040185

Slapáková M, Kivská B, Fekete K, et al. The influence of surface on direction of diffusion in Al-Fe clad material. Materials Characterization. 2022;190. doi:10.1016/j.matchar.2022.112005
LibreCat: /record/36328
DOI: 10.1016/j.matchar.2022.112005

Westermann H, Reitz A, Mahnken R, Schaper M, Grydin O. Microstructure transformations in a press hardening steel during tailored thermomechanical processing. steel research international. Published online 2022. doi:10.1002/srin.202100346
LibreCat: /record/23794
DOI: 10.1002/srin.202100346

Hein M, Kokalj D, Lopes Dias NF, et al. Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications. Metals. 2022;12(1). doi:10.3390/met12010122
LibreCat: /record/29196
DOI: 10.3390/met12010122

Reitz A, Grydin O, Schaper M. Influence of thermomechanical processing on the microstructural and mechanical properties of steel 22Mn. Materials Science and Engineering: A. 2022;838. doi:10.1016/j.msea.2022.142780
LibreCat: /record/29811
DOI: 10.1016/j.msea.2022.142780

Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials. 2022;13(4). doi:10.3390/jfb13040185
LibreCat: /record/33723
DOI: 10.3390/jfb13040185

Tillmann W, Lopes Dias NF, Kokalj D, et al. Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications. Materials Letters. Published online 2022. doi:10.1016/j.matlet.2022.132384
LibreCat: /record/31076
DOI: 10.1016/j.matlet.2022.132384

Teng Z, Wu H, Pramanik S, et al. Characterization and analysis of plastic instability in an ultrafinegrained medium Mn TRIP steel. Advanced Engineering Materials. Published online 2022. doi:10.1002/adem.202200022
LibreCat: /record/31075
DOI: 10.1002/adem.202200022

Krüger JT, Hoyer K-P, Andreiev A, Schaper M, Zinn C. Modiû01cation of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate. Advanced Engineering Materials. Published online 2022. doi:https://doi.org/10.1002/adem.202201008
LibreCat: /record/33498
DOI: https://doi.org/10.1002/adem.202201008

Pramanik S, Milaege D, Hoyer K-P, Schaper M. Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study. Crystals. 2022;12(9). doi:10.3390/cryst12091217
LibreCat: /record/41497
DOI: 10.3390/cryst12091217

Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials. 2022;13(4). doi:10.3390/jfb13040185
LibreCat: /record/41494
DOI: 10.3390/jfb13040185

Abdelaal O, Hengsbach F, Schaper M, Hoyer K-P. LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio. Materials. 2022;15(12). doi:10.3390/ma15124072
LibreCat: /record/41499
DOI: 10.3390/ma15124072

Hein M, Lopes Dias NF, Kokalj D, et al. On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy. International Journal of Fatigue. 2022;166. doi:10.1016/j.ijfatigue.2022.107235
LibreCat: /record/41496
DOI: 10.1016/j.ijfatigue.2022.107235

Krüger JT, Hoyer K-P, Hengsbach F, Schaper M. Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies. Journal of Materials Research and Technology. 2022;19:2369-2387. doi:10.1016/j.jmrt.2022.06.006
LibreCat: /record/32332
DOI: 10.1016/j.jmrt.2022.06.006

Krüger JT, Hoyer K-P, Hengsbach F, Schaper M. Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies. Journal of Materials Research and Technology. 2022;19:2369-2387. doi:10.1016/j.jmrt.2022.06.006
LibreCat: /record/41498
DOI: 10.1016/j.jmrt.2022.06.006

Pramanik S, Milaege D, Hoyer K-P, Schaper M. Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications. Materials Science and Engineering: A. 2022;854. doi:10.1016/j.msea.2022.143887
LibreCat: /record/41495
DOI: 10.1016/j.msea.2022.143887

Hein M, Lopes Dias NF, Pramanik S, et al. Heat Treatments of Metastable ;2 Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion. Materials. 2022;15(11). doi:10.3390/ma15113774
LibreCat: /record/41500
DOI: 10.3390/ma15113774

Pramanik S, Tasche F, Hoyer K-P, Schaper M. Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study. Magnetism. 2022;2(2):88-104. doi:10.3390/magnetism2020007
LibreCat: /record/41503
DOI: 10.3390/magnetism2020007

Tillmann W, Lopes Dias NF, Kokalj D, et al. Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications. Materials Letters. 2022;321. doi:10.1016/j.matlet.2022.132384
LibreCat: /record/41501
DOI: 10.1016/j.matlet.2022.132384

Huang J, Orive AG, Krüger JT, Hoyer K-P, Keller A, Grundmeier G. Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes. Corrosion Science. 2022;200:110186. doi:10.1016/j.corsci.2022.110186
LibreCat: /record/30103
DOI: 10.1016/j.corsci.2022.110186

Teng Z, Wu H, Pramanik S, et al. Characterization and Analysis of Plastic Instability in an UltrafineGrained Medium Mn TRIP Steel. Advanced Engineering Materials. 2022;24(9). doi:10.1002/adem.202200022
LibreCat: /record/41502
DOI: 10.1002/adem.202200022

Huang J, Gonzalez Orive A, Krüger JT, Hoyer K-P, Keller A, Grundmeier G. Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes. Corrosion Science. 2022;200. doi:10.1016/j.corsci.2022.110186
LibreCat: /record/41504
DOI: 10.1016/j.corsci.2022.110186

Krüger JT, Hoyer K-P, Andreiev A, Schaper M, Zinn C. Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate. Advanced Engineering Materials. Published online 2022. doi:10.1002/adem.202201008
LibreCat: /record/41493
DOI: 10.1002/adem.202201008

Pramanik S, Milaege D, Hoyer K-P, Schaper M. Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications. Materials Science and Engineering: A. 2022;854. doi:10.1016/j.msea.2022.143887
LibreCat: /record/41491
DOI: 10.1016/j.msea.2022.143887

Pramanik S, Milaege D, Hoyer K-P, Schaper M. Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study. Crystals. 2022;12(9). doi:10.3390/cryst12091217
LibreCat: /record/41489
DOI: 10.3390/cryst12091217

Abdelaal O, Hengsbach F, Schaper M, Hoyer K-P. LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio. Materials. 2022;15(12). doi:10.3390/ma15124072
LibreCat: /record/41488
DOI: 10.3390/ma15124072

Hein M, Lopes Dias NF, Kokalj D, et al. On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy. International Journal of Fatigue. 2022;166. doi:10.1016/j.ijfatigue.2022.107235
LibreCat: /record/41490
DOI: 10.1016/j.ijfatigue.2022.107235

Hein M. Influence of Physical Vapor Deposition on High-Cycle Fatigue Performance of Additively Manufactured Ti-6Al-7Nb Alloy. Crystals. Published online 2022. doi:10.3390/cryst12091190
LibreCat: /record/33338
DOI: 10.3390/cryst12091190

Hein M, Lopes Dias NF, Pramanik S, et al. Heat Treatments of Metastable ;2 Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion. Materials. Published online 2022.
LibreCat: /record/33340

Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting. Advanced Engineering Materials. 2022;24(10). doi:10.1002/adem.202200874
LibreCat: /record/36332
DOI: 10.1002/adem.202200874

Neuser M, Böhnke M, Grydin O, Bobbert M, Schaper M, Meschut G. Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221075838
LibreCat: /record/29724
DOI: 10.1177/14644207221075838

Neuser M, Grydin O, Frolov Y, Schaper M. Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01106-1
LibreCat: /record/29505
DOI: 10.1007/s11740-022-01106-1

Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108
LibreCat: /record/31828
DOI: 10.1016/j.jajp.2022.100108

Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100108
LibreCat: /record/31238
DOI: 10.1016/j.jajp.2022.100108

Grydin O, Mortensen D, Neuser M, Lindholm D, Fjaer HG, Schaper M. Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips. In: Light Metals 2022. Springer International Publishing; 2022. doi:10.1007/978-3-030-92529-1_96
LibreCat: /record/29771
DOI: 10.1007/978-3-030-92529-1_96

Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108
LibreCat: /record/34215
DOI: 10.1016/j.jajp.2022.100108

Kivská B, Slapáková M, Králík R, et al. Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip. In: IOP Conference Series: Materials Science and Engineering. Vol 1178. ; 2021. doi:10.1088/1757-899x/1178/1/012035
LibreCat: /record/25047
DOI: 10.1088/1757-899x/1178/1/012035

Heiland S, Milkereit B, Hoyer K-P, Zhuravlev E, Keßler O, Schaper M. Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts. Materials. Published online 2021. doi:https://doi.org/10.3390/ma14237190
LibreCat: /record/28017
DOI: https://doi.org/10.3390/ma14237190

Triebus M, Reitz A, Grydin O, et al. Forming Simulation of Tailored Press Hardened Parts. In: 13th European LS-DYNA Conference 2021. ; 2021.
LibreCat: /record/28440

Urbanek S, Pauline F, Magerkohl S, et al. Design and Experimental Investigation of an Additively Manufactured PMSM Rotor. In: ; 2021. doi:10.1109/IEMDC47953.2021.9449566
LibreCat: /record/24426
DOI: 10.1109/IEMDC47953.2021.9449566

Zhuravlev E, Milkereit B, Yang B, et al. Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry. Materials &; Design. Published online 2021. doi:10.1016/j.matdes.2021.109677
LibreCat: /record/24589
DOI: 10.1016/j.matdes.2021.109677

Voswinkel D, Sapli H, Kloidt D, et al. Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment. IOP Conference Series: Materials Science and Engineering. Published online 2021. doi:10.1088/1757-899x/1190/1/012028
LibreCat: /record/26191
DOI: 10.1088/1757-899x/1190/1/012028

Sieger A. Mikrostrukturausprägung additiv gefertigter Gitterstrukturen. Vol 23.; 2021.
LibreCat: /record/26900

Kivská B, Slapáková M, Minárik P, et al. In-situ TEM observation of intermetallic phase growth in Al-steel clad sheet. In: APPLIED PHYSICS OF CONDENSED MATTER (APCOM 2021). AIP Publishing; 2021. doi:10.1063/5.0067491
LibreCat: /record/29812
DOI: 10.1063/5.0067491

Stolbchenko M. Zwei-Rollen-Gießwalzen und thermomechanische Behandlung von dünnen Bändern aus der Aluminiumlegierung EN AW-6082. Shaker Verlag; 2021.
LibreCat: /record/42013

Weiß D, Schramm B, Neuser M, Grydin O, Kullmer G. Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HX mithilfe einer neuen Probengeometrie. In: Vol DVM-Bericht 253. ; 2021:231-240. doi:10.48447/BR-2021-025
LibreCat: /record/24006
DOI: 10.48447/BR-2021-025

Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. 2021;831. doi:10.1016/j.msea.2021.142312
LibreCat: /record/41508
DOI: 10.1016/j.msea.2021.142312

Hein M, Hoyer K-P, Schaper M. Additively processed TiAl6Nb7 alloy for biomedical applications. Materialwissenschaft und Werkstofftechnik. 2021;52(7):703-716. doi:10.1002/mawe.202000288
LibreCat: /record/41511
DOI: 10.1002/mawe.202000288

Garthe K-U, Hoyer K-P, Hagen L, Tillmann W, Schaper M. Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior. Rapid Prototyping Journal. 2021;28(5):833-840. doi:10.1108/rpj-01-2021-0017
LibreCat: /record/41507
DOI: 10.1108/rpj-01-2021-0017

Heiland S, Milkereit B, Hoyer K-P, Zhuravlev E, Kessler O, Schaper M. Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts. Materials. 2021;14(23). doi:10.3390/ma14237190
LibreCat: /record/41506
DOI: 10.3390/ma14237190

Krüger JT, Hoyer K-P, Schaper M. Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants. Materials Letters. 2021;306. doi:10.1016/j.matlet.2021.130890
LibreCat: /record/24790
DOI: 10.1016/j.matlet.2021.130890

Tillmann W, Lopes Dias NF, Franke C, et al. Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V. Surface and Coatings Technology. 2021;421. doi:10.1016/j.surfcoat.2021.127384
LibreCat: /record/41516
DOI: 10.1016/j.surfcoat.2021.127384

Andreiev A, Hoyer K-P, Dula D, et al. Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance. Materials Science and Engineering: A. 2021;822. doi:10.1016/j.msea.2021.141662
LibreCat: /record/41512
DOI: 10.1016/j.msea.2021.141662

Pramanik S, Andreiev A, Hoyer K-P, Schaper M. Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. International Journal of Fatigue. 2021;153. doi:10.1016/j.ijfatigue.2021.106498
LibreCat: /record/41510
DOI: 10.1016/j.ijfatigue.2021.106498

Krüger JT, Hoyer K-P, Schaper M. Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants. Materials Letters. 2021;306. doi:10.1016/j.matlet.2021.130890
LibreCat: /record/41509
DOI: 10.1016/j.matlet.2021.130890

Andreiev A, Hoyer K-P, Dula D, et al. Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology. Published online 2021. doi:10.1016/j.jmatprotec.2021.117183
LibreCat: /record/23898
DOI: 10.1016/j.jmatprotec.2021.117183

Pramanik S, Tasche L, Hoyer K-P, Schaper M. Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal of Materials Engineering and Performance. 2021;30(11):8048-8056. doi:10.1007/s11665-021-06065-9
LibreCat: /record/41517
DOI: 10.1007/s11665-021-06065-9

Tillmann W, Lopes Dias NF, Franke C, et al. Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V. Surface and Coatings Technology. Published online 2021. doi:10.1016/j.surfcoat.2021.127384
LibreCat: /record/24243
DOI: 10.1016/j.surfcoat.2021.127384

Kivská B, Slapáková M, Veselý J, et al. Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet. Materials. 2021;14(24). doi:10.3390/ma14247771
LibreCat: /record/29815
DOI: 10.3390/ma14247771

Hein M, Hoyer K-P, Schaper M. Additively processed TiAl6Nb7 alloy for biomedical applications. Materialwissenschaft und Werkstofftechnik. 2021;52:703-716. doi:10.1002/mawe.202000288
LibreCat: /record/24086
DOI: 10.1002/mawe.202000288

Cieslar M, Králík R, Bajtosová L, et al. High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM. Microscopy and Microanalysis. 2021;27():79-80. doi:10.1017/s1431927621013398
LibreCat: /record/29813
DOI: 10.1017/s1431927621013398

Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds. 2021;871. doi:10.1016/j.jallcom.2021.159544
LibreCat: /record/41514
DOI: 10.1016/j.jallcom.2021.159544

Kivská B, Slapáková M, Minárik P, et al. Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM. Microscopy and Microanalysis. 2021;27():91-92. doi:10.1017/s1431927621013453
LibreCat: /record/29814
DOI: 10.1017/s1431927621013453

Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. Additive Manufacturing. 2021;46. doi:10.1016/j.addma.2021.102087
LibreCat: /record/41515
DOI: 10.1016/j.addma.2021.102087

Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. Published online 2021. doi:10.1016/j.msea.2021.142312
LibreCat: /record/27700
DOI: 10.1016/j.msea.2021.142312

Pramanik S, Tasche L, Hoyer K-P, Schaper M. Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal of Materials Engineering and Performance. Published online 2021. doi:10.1007/s11665-021-06065-9
LibreCat: /record/24090
DOI: 10.1007/s11665-021-06065-9

Garthe K-U, Hoyer K-P, Hagen L, Tillmann W, Schaper M. Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior. Rapid Prototyping Journal. Published online 2021. doi:10.1108/rpj-01-2021-0017
LibreCat: /record/27509
DOI: 10.1108/rpj-01-2021-0017

Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds. Published online 2021. doi:10.1016/j.jallcom.2021.159544
LibreCat: /record/24087
DOI: 10.1016/j.jallcom.2021.159544

Voswinkel D, Kloidt D, Grydin O, Schaper M. Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials. Production Engineering. 2021;15(2):263-270. doi:10.1007/s11740-020-01006-2
LibreCat: /record/24565
DOI: 10.1007/s11740-020-01006-2

Engelkemeier K, Sun A, Voswinkel D, Grydin O, Schaper M, Bremser W. Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte. ChemElectroChem. Published online 2021:2155-2168. doi:10.1002/celc.202100216
LibreCat: /record/24566
DOI: 10.1002/celc.202100216

Andreiev A, Hoyer K-P, Dula D, et al. Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance. Materials Science and Engineering: A. Published online 2021. doi:10.1016/j.msea.2021.141662
LibreCat: /record/23897
DOI: 10.1016/j.msea.2021.141662

Pramanik S, Andreiev A, Hoyer K-P, Schaper M. Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. International Journal of Fatigue. Published online 2021. doi:10.1016/j.ijfatigue.2021.106498
LibreCat: /record/23911
DOI: 10.1016/j.ijfatigue.2021.106498

Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. Additive Manufacturing. Published online 2021. doi:10.1016/j.addma.2021.102087
LibreCat: /record/24088
DOI: 10.1016/j.addma.2021.102087