Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies
J.T. Krüger, K.-P. Hoyer, F. Hengsbach, M. Schaper, Journal of Materials Research and Technology 19 (2022) 2369–2387.

Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies
J.T. Krüger, K.-P. Hoyer, F. Hengsbach, M. Schaper, Journal of Materials Research and Technology 19 (2022) 2369–2387.

Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications
S. Pramanik, D. Milaege, K.-P. Hoyer, M. Schaper, Materials Science and Engineering: A 854 (2022).

Heat Treatments of Metastable ;2 Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion
M. Hein, N.F. Lopes Dias, S. Pramanik, D. Stangier, K.-P. Hoyer, W. Tillmann, M. Schaper, Materials 15 (2022).

Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study
S. Pramanik, F. Tasche, K.-P. Hoyer, M. Schaper, Magnetism 2 (2022) 88–104.

Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications
W. Tillmann, N.F. Lopes Dias, D. Kokalj, D. Stangier, M. Hein, K.-P. Hoyer, M. Schaper, D. Gödecke, H. Oltmanns, J. Meißner, Materials Letters 321 (2022).

Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes
J. Huang, A.G. Orive, J.T. Krüger, K.-P. Hoyer, A. Keller, G. Grundmeier, Corrosion Science 200 (2022) 110186.

Characterization and Analysis of Plastic Instability in an UltrafineGrained Medium Mn TRIP Steel
Z. Teng, H. Wu, S. Pramanik, K.-P. Hoyer, M. Schaper, H. Zhang, C. Boller, P. Starke, Advanced Engineering Materials 24 (2022).

Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes
J. Huang, A. Gonzalez Orive, J.T. Krüger, K.-P. Hoyer, A. Keller, G. Grundmeier, Corrosion Science 200 (2022).

Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate
J.T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, C. Zinn, Advanced Engineering Materials (2022).

Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications
S. Pramanik, D. Milaege, K.-P. Hoyer, M. Schaper, Materials Science and Engineering: A 854 (2022).

Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study
S. Pramanik, D. Milaege, K.-P. Hoyer, M. Schaper, Crystals 12 (2022).

LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio
O. Abdelaal, F. Hengsbach, M. Schaper, K.-P. Hoyer, Materials 15 (2022).

On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy
M. Hein, N.F. Lopes Dias, D. Kokalj, D. Stangier, K.-P. Hoyer, W. Tillmann, M. Schaper, International Journal of Fatigue 166 (2022).

Influence of Physical Vapor Deposition on High-Cycle Fatigue Performance of Additively Manufactured Ti-6Al-7Nb Alloy
M. Hein, Crystals (2022).

Heat Treatments of Metastable ;2 Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion
M. Hein, N.F. Lopes Dias, S. Pramanik, D. Stangier, K.-P. Hoyer, W. Tillmann, M. Schaper, Materials (2022).

Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).

Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).

Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg
M. Neuser, O. Grydin, Y. Frolov, M. Schaper, Production Engineering (2022).

Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).

Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.-R. Bielak, J. Troschitz, Journal of Advanced Joining Processes (2022).

Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H.G. Fjaer, M. Schaper, in: Light Metals 2022, Springer International Publishing, Cham, 2022.

Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).

Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip
B. Kivská, M. Slapáková, R. Králík, L. Bajtosová, M. Cieslar, O. Grydin, M. Stolbchenko, M. Schaper, in: IOP Conference Series: Materials Science and Engineering, 2021.

Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, M. Schaper, Materials (2021).

Forming Simulation of Tailored Press Hardened Parts
M. Triebus, A. Reitz, O. Grydin, J. Grenz, A. Schneidt, R. Erhardt, T. Tröster, M. Schaper, in: 13th European LS-DYNA Conference 2021, 2021.

Design and Experimental Investigation of an Additively Manufactured PMSM Rotor
S. Urbanek, F. Pauline, S. Magerkohl, D. Zimmer, L. Tasche, M. Schaper, B. Ponick, in: 2021.

Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry
E. Zhuravlev, B. Milkereit, B. Yang, S. Heiland, P. Vieth, M. Voigt, M. Schaper, G. Grundmeier, C. Schick, O. Kessler, Materials &; Design (2021).

Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment
D. Voswinkel, H. Sapli, D. Kloidt, T. Heggemann, W. Homberg, O. Grydin, M. Schaper, IOP Conference Series: Materials Science and Engineering (2021).

Mikrostrukturausprägung additiv gefertigter Gitterstrukturen
A. Sieger, Mikrostrukturausprägung additiv gefertigter Gitterstrukturen, 2021.

In-situ TEM observation of intermetallic phase growth in Al-steel clad sheet
B. Kivská, M. Slapáková, P. Minárik, K. Fekete, R. Králík, M. Stolbchenko, M. Schaper, O. Grydin, in: APPLIED PHYSICS OF CONDENSED MATTER (APCOM 2021), AIP Publishing, 2021.

Zwei-Rollen-Gießwalzen und thermomechanische Behandlung von dünnen Bändern aus der Aluminiumlegierung EN AW-6082
M. Stolbchenko, Zwei-Rollen-Gießwalzen und thermomechanische Behandlung von dünnen Bändern aus der Aluminiumlegierung EN AW-6082, Shaker Verlag, 2021.

Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HX mithilfe einer neuen Probengeometrie
D. Weiß, B. Schramm, M. Neuser, O. Grydin, G. Kullmer, in: 2021, pp. 231–240.

Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks
A.A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, M. Schaper, Materials Science and Engineering: A 831 (2021).

Additively processed TiAl6N alloy for biomedical applications
M. Hein, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik 52 (2021) 703–716.

Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior
K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, M. Schaper, Rapid Prototyping Journal 28 (2021) 833–840.

Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Kessler, M. Schaper, Materials 14 (2021).

Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants
J.T. Krüger, K.-P. Hoyer, M. Schaper, Materials Letters 306 (2021).

Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V
W. Tillmann, N.F. Lopes Dias, C. Franke, D. Kokalj, D. Stangier, V. Filor, R.H. Mateus-Vargas, H. Oltmanns, M. Kietzmann, J. Meißner, M. Hein, S. Pramanik, K.-P. Hoyer, M. Schaper, A. Nienhaus, C.A. Thomann, J. Debus, Surface and Coatings Technology 421 (2021).

Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance
A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, O. Grydin, Y. Frolov, M. Schaper, Materials Science and Engineering: A 822 (2021).

Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy
S. Pramanik, A. Andreiev, K.-P. Hoyer, M. Schaper, International Journal of Fatigue 153 (2021).

Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants
J.T. Krüger, K.-P. Hoyer, M. Schaper, Materials Letters 306 (2021).

Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section
A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, M. Haase, J. Gierse, D. Zimmer, T. Tröster, M. Schaper, Journal of Materials Processing Technology (2021).

Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Journal of Materials Engineering and Performance 30 (2021) 8048–8056.

Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V
W. Tillmann, N.F. Lopes Dias, C. Franke, D. Kokalj, D. Stangier, V. Filor, R.H. Mateus-Vargas, H. Oltmanns, M. Kietzmann, J. Meißner, M. Hein, S. Pramanik, K.-P. Hoyer, M. Schaper, A. Nienhaus, C.A. Thomann, J. Debus, Surface and Coatings Technology (2021).

Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet
B. Kivská, M. Slapáková, J. Veselý, M. Kihoulou, K. Fekete, P. Minárik, R. Králík, O. Grydin, M. Stolbchenko, M. Schaper, Materials 14 (2021).

Additively processed TiAl6N alloy for biomedical applications
M. Hein, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik 52 (2021) 703–716.

High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM
M. Cieslar, R. Králík, L. Bajtosová, B. Kivská, M. Hájek, S. Belejová, O. Grydin, M. Stolbchenko, M. Schaper, Microscopy and Microanalysis 27 (2021) 79–80.

Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation
J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner, M. Schaper, Journal of Alloys and Compounds 871 (2021).

Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM
B. Kivská, M. Slapáková, P. Minárik, K. Fekete, R. Králík, M. Stolbchenko, M. Schaper, O. Grydin, Microscopy and Microanalysis 27 (2021) 91–92.

Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing 46 (2021).

Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks
A.A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, M. Schaper, Materials Science and Engineering: A (2021).

Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Journal of Materials Engineering and Performance (2021).

Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior
K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, M. Schaper, Rapid Prototyping Journal (2021).

Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation
J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner, M. Schaper, Journal of Alloys and Compounds (2021).

Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials
D. Voswinkel, D. Kloidt, O. Grydin, M. Schaper, Production Engineering 15 (2021) 263–270.

Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte
K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, W. Bremser, ChemElectroChem (2021) 2155–2168.

Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance
A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, O. Grydin, Y. Frolov, M. Schaper, Materials Science and Engineering: A (2021).

Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy
S. Pramanik, A. Andreiev, K.-P. Hoyer, M. Schaper, International Journal of Fatigue (2021).

Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing (2021).

Characterization of phase transformations during graded thermo- mechanical treatment of steel 22Mn by means of optical methods 
A. Reitz, O. Grydin, M. Schaper, Materials Data for Smart Forming Technologies (2021).

Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy
M. Neuser, O. Grydin, A. Andreiev, M. Schaper, Metals (2021).

Joining suitability of cast aluminium for self-piercing riveting
M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021).

Interdiffusion in aluminum-steel clad strip
B. Krivská, M. Slapáková, M. Kihoulou, R. Králík, L. Bajtosová, M. Cieslar, O. Grydin, M. Stolbchenko, M. Schaper, in: Proc. 20th Conference of Czech and Slovak Physicists, 2020, pp. 153–154.

Aluminum-steel clad material prepared by twin-roll casting
B. KIVSKÁ, M. SLAPÁKOVÁ, O. Grydin, M. CIESLAR, in: METAL 2020 Conference Proeedings, 2020.

Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding
Y. Frolov, Y. Haranich, O. Bobukh, O. Remez, D. Voswinkel, O. Grydin, Journal of Manufacturing Processes 58 (2020) 857–867.

Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050
S. Bondarenko, O. Grydin, Y. Frolov, O. Kuzmina, O. Bobukh, Modern Problems of Metallurgy – Scientific Bulletin 23 (2020) 91–101.

Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts
A. Reitz, O. Grydin, M. Schaper, in: The Minerals, Metals &; Materials Series, Springer, Cham, 2020.

Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials
D. Voswinkel, D. Kloidt, O. Grydin, M. Schaper, Production Engineering (2020) 263–270.

Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips
O. Grydin, M. Stolbchenko, M. Schaper, in: Light Metals 2020, Cham, 2020, pp. 1039–1044.

Kurzzeitaustenitisierung höchstfester Stähle – eine zeiteffiziente Methode zur Fertigung sicherheitsrelevanter Bauteile mit verbesserten Eigenschaften
A. Andreiev, Kurzzeitaustenitisierung höchstfester Stähle – eine zeiteffiziente Methode zur Fertigung sicherheitsrelevanter Bauteile mit verbesserten Eigenschaften, Books on Demand, 2020.

Development of SLM Ni-based Superalloys and Investigation of Corrosion Behavior in Chloride-containing Environments
M. Wooldridge, Development of SLM Ni-Based Superalloys and Investigation of Corrosion Behavior in Chloride-Containing Environments, Shaker Verlag, 2020.

Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM
W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology 29 (2020) 1396–1409.

Effect of substrate pretreatment on the low cycle fatigue performance of tungsten carbidecobalt coated additive manufactured 316L substrates
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik 51 (2020) 1452–1464.

Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22Mn
A. Reitz, O. Grydin, M. Schaper, Metallurgical and Materials Transactions A (2020) 5628–5638.

New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications
O. Grydin, M. Stolbchenko, M. Schaper, S. Belejová, R. Králík, L. Bajtosová, B. Kivská, M. Hájek, M. Cieslar, Metals 10 (2020).

Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties
K. Engelkemeier, J. Lindner, J. Bürger, K. Vaupel, M. Hartmann, M. Tiemann, K.-P. Hoyer, M. Schaper, Nanotechnology 31 (2020) 095701.

Strain parameters at hot rolling of aluminum strips reinforced with steel netting
M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, M. Schaper, Journal of Sandwich Structures &; Materials 22 (2020) 2009–2029.

Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations
H. Wu, T. Bill, Z.J. Teng, S. Pramanik, K.-P. Hoyer, M. Schaper, P. Starke, Materials Science and Engineering: A 794 (2020).

Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting
W. Tillmann, N.F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach, K.-P. Hoyer, Surface and Coatings Technology 394 (2020).

Degradable silverbased alloys
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper, Materialwissenschaft Und Werkstofftechnik 51 (2020) 517–530.

The mechanical properties of rolled wire-reinforced aluminum composites at different strain values
M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M.A. Tershakovec, M. Schaper, Mechanics of Advanced Materials and Structures 27 (2020) 1599–1608.

Effect of substrate pretreatment on the low cycle fatigue performance of tungsten carbidecobalt coated additive manufactured 316L substrates
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 1452–1464.

Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM
W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology (2020) 1396–1409.

Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM
W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz, K.-U. Garthe, Journal of Thermal Spray Technology (2020) 1396–1409.

Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations
H. Wu, T. Bill, Z. Teng, S. Pramanik, K.-P. Hoyer, M. Schaper, P. Starke, Materials Science and Engineering: A (2020).

Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting
W. Tillmann, N.F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach, K.-P. Hoyer, Surface and Coatings Technology (2020).

Effect of substrate pretreatment on the low cycle fatigue performance of tungsten carbidecobalt coated additive manufactured 316L substrates
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 1452–1464.

Influence of Microstructure in NearSurface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads
O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, M. Schaper, Advanced Engineering Materials (2020).

Degradable silverbased alloys
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, M. Schaper, Materialwissenschaft Und Werkstofftechnik (2020) 517–530.

Alloy Design for Biomedical Applications in Additive Manufacturing
K.-P. Hoyer, M. Schaper, in: TMS 2019 148th Annual Meeting &; Exhibition Supplemental Proceedings, Cham, 2019.

Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry
L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, O. Keßler, in: TMS 2019 148th Annual Meeting &; Exhibition Supplemental Proceedings, Cham, 2019.

Einfluss von Eigenspannungen und Oberflächenrauheit additiv gefertigter Komponenten aus 316L auf die Beschichtbarkeit und Ermüdungsfestigkeit, 
M. Eiber, Deutscher Verband für Materialforschung und -prüfung e.V., eds., Einfluss von Eigenspannungen und Oberflächenrauheit additiv gefertigter Komponenten aus 316L auf die Beschichtbarkeit und Ermüdungsfestigkeit, , Berlin, 2019.

Adhesion of HVOF sprayed WC-Co coatings on additively processed 316L
F. Azarmi, ed., Adhesion of HVOF Sprayed WC-Co Coatings on Additively Processed 316L, ASM International, Yokohama, 2019.

Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung
M.E. Aydinöz, Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung, 2019.

Intrinsically lubricated tool inserts for deep drawing applications generated by selective laser melting
F. Bader, F. Hengsbach, K.-P. Hoyer, W. Homberg, M. Schaper, in: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019.

Laserinduzierte Nanostrukturierung intrinsisch gefertigter Hybridstrukturen – Oberflächenmorphologie, Verbindungs- und Korrosionseigenschaften
C. Zinn, Laserinduzierte Nanostrukturierung intrinsisch gefertigter Hybridstrukturen – Oberflächenmorphologie, Verbindungs- und Korrosionseigenschaften, Books on Demand, 2019.

Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry
L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, O. Keßler, in: The Minerals, Metals &;amp; Materials Series, Springer International Publishing, Cham, 2019.

Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082
O. Grydin, N. Sotirov, A. Samsonenko, N. Biba, A. Andreiev, M. Stolbchenko, T. Behr, I. Frolov, M. Schaper, Materials Science Forum (2019) 85–92.

Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties
K. Engelkemeier, J.K.N. Lindner, J. Bürger, K. Vaupel, M. Hartmann, M. Tiemann, K.-P. Hoyer, M. Schaper, Nanotechnology 31 (2019).