Grydin, Olexandr, Anatolii Andreiev, Martin Joachim Holzweißig, Christian Johannes Rüsing, Kristina Duschik, Yaroslav Frolov, and Mirko Schaper. “Short Austenitization Treatment with Subsequent Press Hardening: Correlation between Process Parameters, Microstructure and Mechanical Properties.”https://doi.org/10.1016/j.msea.2019.02.025__Materials Science and Engineering: A, 2019, 176–95.https://doi.org/10.1016/j.msea.2019.02.025 .
LibreCat: /record/23900
DOI: 10.1016/j.msea.2019.02.025

Grydin, Olexandr, Anatolii Andreiev, Mergim Zogaj, Yaroslav Frolov, and Mirko Schaper. “Relationships between Microstructural and Mechanical Performance on Example of an AirHardening Steel.”https://doi.org/10.1002/adem.201900134__Advanced Engineering Materials, 2019.https://doi.org/10.1002/adem.201900134 .
LibreCat: /record/23901
DOI: 10.1002/adem.201900134

Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.”https://doi.org/10.1109/itec.2018.8450250__In 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018.https://doi.org/10.1109/itec.2018.8450250 .
LibreCat: /record/24105
DOI: 10.1109/itec.2018.8450250

Eiber, Marion, Hans Albert Richard, and Deutscher Verband für Materialforschung und -prüfung e.V., eds. Einfluss unterschiedlicher Pulvereigenschaften beim selektiven Laserstrahlschmelzen von TiAl6 auf die Werkstoffeigenschaften. Berlin, 2018.
LibreCat: /record/24115

Eiber, Marion, and Hans Albert Richard, eds. Metallische Legierungssysteme für die additive Fertigung belastungsangepasster Implantate. Berlin, 2018.
LibreCat: /record/24116

Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts withhttps://doi.org/10.1007/s40964-018-0044-4__Layers.”https://doi.org/10.1007/s40964-018-0044-4__Progress in Additive Manufacturing, 2018, 221–31.https://doi.org/10.1007/s40964-018-0044-4 .
LibreCat: /record/24104
DOI: 10.1007/s40964-018-0044-4

Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts withhttps://doi.org/10.1007/s40964-018-0044-4__Layers.”https://doi.org/10.1007/s40964-018-0044-4__Progress in Additive Manufacturing 3, no. 4 (2018): 221–31.https://doi.org/10.1007/s40964-018-0044-4 .
LibreCat: /record/41525
DOI: 10.1007/s40964-018-0044-4

Engelkemeier, Katja, Christian Mücke, Kay-Peter Hoyer, and Mirko Schaper. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.”https://doi.org/10.1007/s42114-018-0071-0__Advanced Composites and Hybrid Materials 2, no. 1 (2018): 189–99.https://doi.org/10.1007/s42114-018-0071-0 .
LibreCat: /record/41528
DOI: 10.1007/s42114-018-0071-0

Engelkemeier, Katja, Kay-Peter Hoyer, and Mirko Schaper. “Influence of S/S-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.”https://doi.org/10.1016/j.matlet.2018.11.041__Materials Letters 236 (2018): 752–56.https://doi.org/10.1016/j.matlet.2018.11.041 .
LibreCat: /record/41527
DOI: 10.1016/j.matlet.2018.11.041

Engelkemeier, Katja, Christian Mücke, Kay-Peter Hoyer, and Mirko Schaper. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.”https://doi.org/10.1007/s42114-018-0071-0__Advanced Composites and Hybrid Materials, 2018, 189–99.https://doi.org/10.1007/s42114-018-0071-0 .
LibreCat: /record/24107
DOI: 10.1007/s42114-018-0071-0

Engelkemeier, Katja, Kay-Peter Hoyer, and Mirko Schaper. “Influence of S/S-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.”https://doi.org/10.1016/j.matlet.2018.11.041__Materials Letters, 2018, 752–56.https://doi.org/10.1016/j.matlet.2018.11.041 .
LibreCat: /record/24106
DOI: 10.1016/j.matlet.2018.11.041

Grydin, Olexandr, Anatolii Andreiev, Nikolay Sotirov, Mykhailo Stolbchenko, Teresa M. Behr, Anton Ashkelianets, Iaroslav Frolov, and Mirko Schaper. “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082.”https://doi.org/10.1007/s11837-018-3144-1__JOM, 2018, 407–18.https://doi.org/10.1007/s11837-018-3144-1 .
LibreCat: /record/23902
DOI: 10.1007/s11837-018-3144-1

Lossen, Benjamin, Anatolii Andreiev, Mykhailo Stolbchenko, Werner Homberg, and Mirko Schaper. “Friction-Spinning—Grain Structure Modification and the Impact on Stress/Strain Behaviour.”https://doi.org/10.1016/j.jmatprotec.2018.06.015__Journal of Materials Processing Technology, 2018, 242–50.https://doi.org/10.1016/j.jmatprotec.2018.06.015 .
LibreCat: /record/23903
DOI: 10.1016/j.jmatprotec.2018.06.015

Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.”https://doi.org/10.1109/itec.2018.8450250__In 2018 IEEE Transportation Electrification Conference and Expo (ITEC). IEEE, 2018.https://doi.org/10.1109/itec.2018.8450250 .
LibreCat: /record/41526
DOI: 10.1109/itec.2018.8450250

Wiesener, Markus, K. Peters, Alexander Taube, Adrian Keller, Kay-Peter Hoyer, Thomas Niendorf, and Guido Grundmeier. “Corrosion Properties of Bioresorbable FeMn-Ag Alloys Prepared by Selective Laser Melting.”https://doi.org/10.1002/maco.201709478__Materials and Corrosion, 2017, 1028–36.https://doi.org/10.1002/maco.201709478 .
LibreCat: /record/24109
DOI: 10.1002/maco.201709478

Taube, Alexander, Wadim Reschetnik, Lorenz Pauli, Kay-Peter Hoyer, Gunter Kullmer, and Mirko Schaper. “Numerische und mechanische Untersuchung additiv gefertigter TiAl6 Gitterstrukturen.”https://doi.org/10.1007/978-3-658-17780-5_13__In Additive Fertigung von Bauteilen und Strukturen. Wiesbaden: Springer Vieweg, 2017.https://doi.org/10.1007/978-3-658-17780-5_13 .
LibreCat: /record/24117
DOI: 10.1007/978-3-658-17780-5_13

Brüggemann, Jan-Peter, Wadim Reschetnik, Gunter Kullmer, Hans Albert Richard, Mehmet Esat Aydinöz, Kay-Peter Hoyer, and Mirko Schaper. “Optimierung Der Werkstoffeigenschaften von Selektiv Lasergeschmolzenem Alumi-Nium 7075, .” In DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, edited by Deutscher Verband für Materialforschung und -prüfung e.V., 11–22. Berlin, 2017.
LibreCat: /record/24119

Grydin, Olexandr, Anatolii Andreiev, Arkadii Briukhanov, Zoia Briukhanova, and Mirko Schaper. “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling.”https://doi.org/10.1002/srin.201600397__Steel Research International, 2017.https://doi.org/10.1002/srin.201600397 .
LibreCat: /record/23904
DOI: 10.1002/srin.201600397

Lossen, Benjamin, Anatolii Andreiev, Werner Homberg, and Mirko Schaper. “Friction-Spinning – Possibility of Grain Structure Adjustment.”https://doi.org/10.1016/j.proeng.2017.10.933__Procedia Engineering, 2017, 1749–54.https://doi.org/10.1016/j.proeng.2017.10.933 .
LibreCat: /record/23909
DOI: 10.1016/j.proeng.2017.10.933

Andreiev, Anatolii, Olexandr Grydin, and Mirko Schaper. “A Rapid Heating Method for Press Hardening Processing.”https://doi.org/10.1007/978-3-319-52132-9_72__In Proceedings of the 3rd Pan American Materials Congress. Cham, 2017.https://doi.org/10.1007/978-3-319-52132-9_72 .
LibreCat: /record/23910
DOI: 10.1007/978-3-319-52132-9_72