K. Engelkemeier, K.-P. Hoyer, and M. Schaper, “Influence of s/s-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers,”10.1016/j.matlet.2018.11.041__Materials Letters, pp. 752–756, 2018, doi:10.1016/j.matlet.2018.11.041 .
LibreCat: /record/24106
DOI: 10.1016/j.matlet.2018.11.041

O. Grydin et al., “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082,”10.1007/s11837-018-3144-1__JOM, pp. 407–418, 2018, doi:10.1007/s11837-018-3144-1 .
LibreCat: /record/23902
DOI: 10.1007/s11837-018-3144-1

B. Lossen, A. Andreiev, M. Stolbchenko, W. Homberg, and M. Schaper, “Friction-spinning—Grain structure modification and the impact on stress/strain behaviour,”10.1016/j.jmatprotec.2018.06.015__Journal of Materials Processing Technology, pp. 242–250, 2018, doi:10.1016/j.jmatprotec.2018.06.015 .
LibreCat: /record/23903
DOI: 10.1016/j.jmatprotec.2018.06.015

S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,”10.1109/itec.2018.8450250__2018, doi:10.1109/itec.2018.8450250 .
LibreCat: /record/41526
DOI: 10.1109/itec.2018.8450250

M. Wiesener et al., “Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting,”10.1002/maco.201709478__Materials and Corrosion, pp. 1028–1036, 2017, doi:10.1002/maco.201709478 .
LibreCat: /record/24109
DOI: 10.1002/maco.201709478

A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, and M. Schaper, “Numerische und mechanische Untersuchung additiv gefertigter TiAl6 Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, Wiesbaden: Springer Vieweg, 2017.
LibreCat: /record/24117
DOI: 10.1007/978-3-658-17780-5_13

J.-P. Brüggemann et al., “Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Alumi-nium 7075, ,” in DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, 2017, pp. 11–22.
LibreCat: /record/24119

O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, and M. Schaper, “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling,” steel research international, 2017.
LibreCat: /record/23904
DOI: 10.1002/srin.201600397

B. Lossen, A. Andreiev, W. Homberg, and M. Schaper, “Friction-Spinning – Possibility of Grain Structure Adjustment,” Procedia Engineering, pp. 1749–1754, 2017.
LibreCat: /record/23909
DOI: 10.1016/j.proeng.2017.10.933

A. Andreiev, O. Grydin, and M. Schaper, “A Rapid Heating Method for Press Hardening Processing,” in Proceedings of the 3rd Pan American Materials Congress, Cham, 2017.
LibreCat: /record/23910
DOI: 10.1007/978-3-319-52132-9_72

C. Birr, Randzonenmodifikation von Fe-Basiswerkstoffen auf Grundlage einer Lichtbogenbehandlung. Paderborn, 2017.
LibreCat: /record/42009
DOI: 10.17619/UNIPB/1-71 

M. Wiesener et al., “Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting,”10.1002/maco.201709478__Materials and Corrosion, vol. 68, no. 10, pp. 1028–1036, 2017, doi:10.1002/maco.201709478 .
LibreCat: /record/41531
DOI: 10.1002/maco.201709478

A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, and M. Schaper, “Numerische und mechanische Untersuchung additiv gefertigter TiAl6 Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, Wiesbaden: Springer Fachmedien Wiesbaden, 2017.
LibreCat: /record/41529
DOI: 10.1007/978-3-658-17780-5_13

F. Hengsbach et al., “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,”10.1016/j.matdes.2017.07.046__Materials &; Design, pp. 136–142, 2017, doi:10.1016/j.matdes.2017.07.046 .
LibreCat: /record/24108
DOI: 10.1016/j.matdes.2017.07.046

F. Hengsbach et al., “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,”10.1016/j.matdes.2017.07.046__Materials &;amp; Design, vol. 133, pp. 136–142, 2017, doi:10.1016/j.matdes.2017.07.046 .
LibreCat: /record/41530
DOI: 10.1016/j.matdes.2017.07.046

W. Reschetnik et al., “Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy,”10.1016/j.prostr.2016.06.380__Procedia Structural Integrity, pp. 3040–3048, 2016, doi:10.1016/j.prostr.2016.06.380 .
LibreCat: /record/24111
DOI: 10.1016/j.prostr.2016.06.380

P. Kanagarajah, Ermüdungsverhalten und mikrostrukturelle Charakterisierung der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel 939, vol. 6. 2016.
LibreCat: /record/26901

W. Reschetnik et al., “Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy,”10.1016/j.prostr.2016.06.380__Procedia Structural Integrity, vol. 2, pp. 3040–3048, 2016, doi:10.1016/j.prostr.2016.06.380 .
LibreCat: /record/41533
DOI: 10.1016/j.prostr.2016.06.380

W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinöz, and K.-P. Hoyer, “Hot isostatic pressing of IN718 components manufactured by selective laser melting,”10.1016/j.addma.2016.11.006__Additive Manufacturing, vol. 13, pp. 93–102, 2016, doi:10.1016/j.addma.2016.11.006 .
LibreCat: /record/41532
DOI: 10.1016/j.addma.2016.11.006

W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinöz, and K.-P. Hoyer, “Hot isostatic pressing of IN718 components manufactured by selective laser melting,”10.1016/j.addma.2016.11.006__Additive Manufacturing, pp. 93–102, 2016, doi:10.1016/j.addma.2016.11.006 .
LibreCat: /record/24110
DOI: 10.1016/j.addma.2016.11.006