Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.”10.1016/j.ijfatigue.2021.106498__International Journal of Fatigue, vol. 153, 106498, Elsevier BV, 2021, doi:10.1016/j.ijfatigue.2021.106498.
LibreCat: /record/41510
DOI: 10.1016/j.ijfatigue.2021.106498

Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.”10.1016/j.matlet.2021.130890__Materials Letters, vol. 306, 130890, Elsevier BV, 2021, doi:10.1016/j.matlet.2021.130890.
LibreCat: /record/41509
DOI: 10.1016/j.matlet.2021.130890

Andreiev, Anatolii, et al. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.”10.1016/j.jmatprotec.2021.117183__Journal of Materials Processing Technology, 117183, 2021, doi:10.1016/j.jmatprotec.2021.117183.
LibreCat: /record/23898
DOI: 10.1016/j.jmatprotec.2021.117183

Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.”10.1007/s11665-021-06065-9__Journal of Materials Engineering and Performance, vol. 30, no. 11, Springer Science and Business Media LLC, 2021, pp. 8048–56, doi:10.1007/s11665-021-06065-9.
LibreCat: /record/41517
DOI: 10.1007/s11665-021-06065-9

Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.”10.1016/j.surfcoat.2021.127384__Surface and Coatings Technology, 127384, 2021, doi:10.1016/j.surfcoat.2021.127384.
LibreCat: /record/24243
DOI: 10.1016/j.surfcoat.2021.127384

Kivská, Barbora, et al. “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet.”10.3390/ma14247771__Materials, vol. 14, no. 24, 7771, MDPI AG, 2021, doi:10.3390/ma14247771.
LibreCat: /record/29815
DOI: 10.3390/ma14247771

Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.”10.1002/mawe.202000288__Materialwissenschaft Und Werkstofftechnik, vol. 52, 2021, pp. 703–16, doi:10.1002/mawe.202000288.
LibreCat: /record/24086
DOI: 10.1002/mawe.202000288

Cieslar, Miroslav, et al. “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-Situ SEM and STEM.”10.1017/s1431927621013398__Microscopy and Microanalysis, vol. 27, no. , Cambridge University Press (CUP), 2021, pp. 79–80, doi:10.1017/s1431927621013398.
LibreCat: /record/29813
DOI: 10.1017/s1431927621013398

Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.”10.1016/j.jallcom.2021.159544__Journal of Alloys and Compounds, vol. 871, 159544, Elsevier BV, 2021, doi:10.1016/j.jallcom.2021.159544.
LibreCat: /record/41514
DOI: 10.1016/j.jallcom.2021.159544

Kivská, Barbora, et al. “Intermetallic Phase Growth in Al-Steel Clad Strip during In-Situ Heating in TEM.”10.1017/s1431927621013453__Microscopy and Microanalysis, vol. 27, no. , Cambridge University Press (CUP), 2021, pp. 91–92, doi:10.1017/s1431927621013453.
LibreCat: /record/29814
DOI: 10.1017/s1431927621013453

Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.”10.1016/j.addma.2021.102087__Additive Manufacturing, vol. 46, 102087, Elsevier BV, 2021, doi:10.1016/j.addma.2021.102087.
LibreCat: /record/41515
DOI: 10.1016/j.addma.2021.102087

Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.”10.1016/j.msea.2021.142312__Materials Science and Engineering: A, 142312, Elsevier, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat: /record/27700
DOI: 10.1016/j.msea.2021.142312

Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.”10.1007/s11665-021-06065-9__Journal of Materials Engineering and Performance, 2021, doi:10.1007/s11665-021-06065-9.
LibreCat: /record/24090
DOI: 10.1007/s11665-021-06065-9

Garthe, Kai-Uwe, et al. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.”10.1108/rpj-01-2021-0017__Rapid Prototyping Journal, 2021, doi:10.1108/rpj-01-2021-0017.
LibreCat: /record/27509
DOI: 10.1108/rpj-01-2021-0017

Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.”10.1016/j.jallcom.2021.159544__Journal of Alloys and Compounds, 159544, 2021, doi:10.1016/j.jallcom.2021.159544.
LibreCat: /record/24087
DOI: 10.1016/j.jallcom.2021.159544

Voswinkel, Dietrich, et al. “Time Efficient Laser Modification of Steel Surfaces for Advanced Bonding in Hybrid Materials.”10.1007/s11740-020-01006-2__Production Engineering, vol. 15, no. 2, 2021, pp. 263–70, doi:10.1007/s11740-020-01006-2.
LibreCat: /record/24565
DOI: 10.1007/s11740-020-01006-2

Engelkemeier, Katja, et al. “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte.”10.1002/celc.202100216__ChemElectroChem, Wiley, 2021, pp. 2155–68, doi:10.1002/celc.202100216.
LibreCat: /record/24566
DOI: 10.1002/celc.202100216

Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.”10.1016/j.msea.2021.141662__Materials Science and Engineering: A, 141662, 2021, doi:10.1016/j.msea.2021.141662.
LibreCat: /record/23897
DOI: 10.1016/j.msea.2021.141662

Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.”10.1016/j.ijfatigue.2021.106498__International Journal of Fatigue, 106498, 2021, doi:10.1016/j.ijfatigue.2021.106498.
LibreCat: /record/23911
DOI: 10.1016/j.ijfatigue.2021.106498

Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.”10.1016/j.addma.2021.102087__Additive Manufacturing, 102087, 2021, doi:10.1016/j.addma.2021.102087.
LibreCat: /record/24088
DOI: 10.1016/j.addma.2021.102087