Menge, Dennis, Dennis Milaege, Kay-Peter Hoyer, Hans-Joachim Schmid, and Mirko Schaper. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.”https://doi.org/10.14361/9783839463772-007__In Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer. Bielefeld, Germany: transcript Verlag, 2023.https://doi.org/10.14361/9783839463772-007 .

Pramanik, Sudipta, Jan Tobias Krüger, Mirko Schaper, and Kay-Peter Hoyer. “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution.”https://doi.org/10.1007/s11661-023-07186-7__Metallurgical and Materials Transactions A, 2023.https://doi.org/10.1007/s11661-023-07186-7 .

Pramanik, Sudipta, Dennis Milaege, Maxwell Hein, Kay-Peter Hoyer, and Mirko Schaper. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.”https://doi.org/10.3390/cryst13111592__Crystals 13, no. 11 (2023).https://doi.org/10.3390/cryst13111592 .

Bieber, Maximilian, Michael Haase, Frederik Tasche, Alexander Zibart, and Bernd Ponick. “Additively Manufactured Air-Cooled Lightweight Rotor for an Automotive Electric Motor.”https://doi.org/10.1109/iemdc55163.2023.10238918__In 2023 IEEE International Electric Machines &;amp; Drives Conference (IEMDC). IEEE, 2023.https://doi.org/10.1109/iemdc55163.2023.10238918 .

Borgert, Thomas, Moritz Neuser, Eugen Wiens, Olexandr Grydin, Werner Homberg, and Mirko Schaper. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.”https://doi.org/10.21741/9781644902417-24__In Materials Research Proceedings, 25:187–94. Materials Research Forum LLC, 2023.https://doi.org/10.21741/9781644902417-24 .

Neuser, Moritz, Mirko Schaper, and Olexandr Grydin. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.”https://doi.org/10.3390/jmmp7040132__Journal of Manufacturing and Materials Processing 7, no. 4 (2023).https://doi.org/10.3390/jmmp7040132 .

Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.”https://doi.org/10.3390/jmmp7050169__Journal of Manufacturing and Materials Processing 7, no. 5 (2023).https://doi.org/10.3390/jmmp7050169 .

Grydin, Olexandr, Moritz Neuser, and Mirko Schaper. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.”https://doi.org/10.1007/978-3-031-41341-4_61__In     Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). Cham: Springer Nature Switzerland, 2023.https://doi.org/10.1007/978-3-031-41341-4_61 .

Krüger, Jan Tobias, Kay-Peter Hoyer, Florian Hengsbach, and Mirko Schaper. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.”https://doi.org/10.1016/j.jmrt.2022.06.006__Journal of Materials Research and Technology 19 (2022): 2369–87.https://doi.org/10.1016/j.jmrt.2022.06.006 .

Haase, Michael, Frederik Tasche, Maximilian Bieber, and Alexander Zibart. Innovative Leichtbau- Und Kühlungskonzepte Für Elektrische Maschinen Durch Additive  Fertigung (ILuKadd3D). Vol. Heft 1526. Frankfurt: Forschungsvereinigung Antriebstechnik e.V., 2022.

Krüger, Jan Tobias. “Adjustment of AgCaLa Phases in a FeMn Matrix via LBM for Implants with Adapted Degradation.”https://doi.org/10.3390/cryst12081146__Crystals 12 (2022).https://doi.org/10.3390/cryst12081146 .

CIESLAR, Miroslav, Barbora KIVSKÁ, Rostislav KRÁLÍK, Lucia BAJTOSOVÁ, Olexandr Grydin, Mykhailo STOLBCHENKO, and Mirko Schaper. “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY.”https://doi.org/10.37904/metal.2022.4438__In METAL 2022 Conference Proeedings. TANGER Ltd., 2022.https://doi.org/10.37904/metal.2022.4438 .

BAJTOSOVÁ, Lucia, Olexandr Grydin, Mykhailo STOLBCHENKO, Mirko Schaper, Barbora KIVSKÁ, Rostislav KRÁLÍK, Michaela SLAPÁKOVÁ, and Miroslav CIESLAR. “Phase Identification in Twin-Roll Cast Al-Li Alloys.”https://doi.org/10.37904/metal.2022.4437__In METAL 2022 Conference Proeedings. TANGER Ltd., 2022.https://doi.org/10.37904/metal.2022.4437 .

Abdelaal, Osama, Florian Hengsbach, Mirko Schaper, and Kay-Peter Hoyer. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.”https://doi.org/10.3390/ma15124072__Materials 15, no. 12 (2022).https://doi.org/10.3390/ma15124072 .

Voswinkel, Dietrich, Jan Andre Striewe, Olexandr Grydin, Dennis Meinderink, Guido Grundmeier, Mirko Schaper, and Thomas Tröster. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.”https://doi.org/10.1080/09243046.2022.2143746__Advanced Composite Materials, 2022, 1–16.https://doi.org/10.1080/09243046.2022.2143746 .

Pramanik, Sudipta, Frederik Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.”https://doi.org/10.3390/magnetism2020007__Magnetism 2 (2022): 88–104.https://doi.org/10.3390/magnetism2020007 .

Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-Mechanical Processing of a Press Hardening Steel.”https://doi.org/10.1007/s11661-022-06732-z__Metallurgical and Materials Transactions A 53, no. 8 (2022): 3125–42.https://doi.org/10.1007/s11661-022-06732-z .

Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.”https://doi.org/10.3390/jfb13040185__Journal of Functional Biomaterials 13, no. 4 (2022): 185.https://doi.org/10.3390/jfb13040185 .

Slapáková, Michaela, Barbora Kivská, Klaudia Fekete, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “The Influence of Surface on Direction of Diffusion in Al-Fe Clad Material.”https://doi.org/10.1016/j.matchar.2022.112005__Materials Characterization 190 (2022).https://doi.org/10.1016/j.matchar.2022.112005 .

Westermann, Hendrik, Alexander Reitz, Rolf Mahnken, Mirko Schaper, and Olexandr Grydin. “Microstructure Transformations in a Press Hardening Steel during Tailored Thermomechanical Processing.”https://doi.org/10.1002/srin.202100346__Steel Research International, 2022.https://doi.org/10.1002/srin.202100346 .