A. Reitz, O. Grydin, and M. Schaper, “Characterization of phase transformations during graded thermo- mechanical treatment of steel 22Mn by means of optical methods ,” Materials Data for Smart Forming Technologies, 2021.

M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,”10.3390/met11081304__Metals, Art. no. 1304, 2021, doi:10.3390/met11081304 .

M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,”10.1088/1757-899x/1157/1/012005__IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi:10.1088/1757-899x/1157/1/012005 .

B. Krivská et al., “Interdiffusion in aluminum-steel clad strip,” in Proc. 20th Conference of Czech and Slovak Physicists, Prague, 2020, pp. 153–154.

B. KIVSKÁ, M. SLAPÁKOVÁ, O. Grydin, and M. CIESLAR, “Aluminum-steel clad material prepared by twin-roll casting,”10.37904/metal.2020.3595__2020, doi:10.37904/metal.2020.3595 .

Y. Frolov, Y. Haranich, O. Bobukh, O. Remez, D. Voswinkel, and O. Grydin, “Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding,”10.1016/j.jmapro.2020.08.049__Journal of Manufacturing Processes, vol. 58, pp. 857–867, 2020, doi:10.1016/j.jmapro.2020.08.049 .

S. Bondarenko, O. Grydin, Y. Frolov, O. Kuzmina, and O. Bobukh, “Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050,” Modern Problems of Metallurgy – Scientific Bulletin, vol. 23, pp. 91–101, 2020.

A. Reitz, O. Grydin, and M. Schaper, “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts,” in The Minerals, Metals &; Materials Series, Cham: Springer, 2020.

D. Voswinkel, D. Kloidt, O. Grydin, and M. Schaper, “Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials,”10.1007/s11740-020-01006-2__Production Engineering, pp. 263–270, 2020, doi:10.1007/s11740-020-01006-2 .

O. Grydin, M. Stolbchenko, and M. Schaper, “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2020, Cham, 2020, pp. 1039–1044.

A. Andreiev, Kurzzeitaustenitisierung höchstfester Stähle – eine zeiteffiziente Methode zur Fertigung sicherheitsrelevanter Bauteile mit verbesserten Eigenschaften. Books on Demand, 2020.

M. Wooldridge, Development of SLM Ni-based Superalloys and Investigation of Corrosion Behavior in Chloride-containing Environments. Shaker Verlag, 2020.

W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,”10.1007/s11666-020-01081-y__Journal of Thermal Spray Technology, vol. 29, no. 6, pp. 1396–1409, 2020, doi:10.1007/s11666-020-01081-y .

W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pretreatment on the low cycle fatigue performance of tungsten carbidecobalt coated additive manufactured 316L substrates,”10.1002/mawe.202000109__Materialwissenschaft und Werkstofftechnik, vol. 51, no. 11, pp. 1452–1464, 2020, doi:10.1002/mawe.202000109 .

A. Reitz, O. Grydin, and M. Schaper, “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22Mn,”10.1007/s11661-020-05976-x__Metallurgical and Materials Transactions A, pp. 5628–5638, 2020, doi:10.1007/s11661-020-05976-x .

O. Grydin et al., “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications,”10.3390/met10080987__Metals, vol. 10, no. 8, Art. no. 987, 2020, doi:10.3390/met10080987 .

K. Engelkemeier et al., “Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties,”10.1088/1361-6528/ab55bc__Nanotechnology, vol. 31, p. 095701, 2020, doi:10.1088/1361-6528/ab55bc .

M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, and M. Schaper, “Strain parameters at hot rolling of aluminum strips reinforced with steel netting,”10.1177/1099636218792539__Journal of Sandwich Structures &; Materials, vol. 22, no. 6, pp. 2009–2029, 2020, doi:10.1177/1099636218792539 .

H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations,”10.1016/j.msea.2020.139597__Materials Science and Engineering: A, vol. 794, Art. no. 139597, 2020, doi:10.1016/j.msea.2020.139597 .

W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,”10.1016/j.surfcoat.2020.125748__Surface and Coatings Technology, vol. 394, Art. no. 125748, 2020, doi:10.1016/j.surfcoat.2020.125748 .