@inproceedingsRisse_Woodcock_Kullmer_Schramm_Richard_2019, title=Reconstruction of a defective finger joint surface and development of an adapted external fixator, booktitle=Lecture Notes in Computational Vision and Biomechanics , author=Risse, L. and Woodcock, S.C. and Kullmer, G. and Schramm, B. and Richard, H.A., year=2019, pages=230–238 
LibreCat: /record/22144

@inproceedingsKlippstein_Schmid_2019, title=Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung, DOI=10.3139/9783446462441.025, booktitle=Proceedings of the 16th Rapid.Tech Conference, author=Klippstein, Sven Helge and Schmid, Hans-Joachim, year=2019 
LibreCat: /record/22198
DOI: 10.3139/9783446462441.025

@inproceedingsKünneke_Lieneke_Lammers_Zimmer_2019, title=Design guidelines for post-processing of laser beam melting in context of support structures, DOI=https://www.euspen.eu/knowledge-base/AM19127.pdf, booktitle=Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, author=Künneke, Thomas and Lieneke, Tobias and Lammers, Stefan and Zimmer, Detmar, year=2019, pages=137–140 
LibreCat: /record/22442
DOI: https://www.euspen.eu/knowledge-base/AM19127.pdf

@inproceedingsLieneke_Künneke_Schlenker_Denzer_Zimmer_2019, title=Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances, DOI=https://www.euspen.eu/knowledge-base/AM19129.pdf, booktitle=Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, author=Lieneke, Tobias and Künneke, Thomas and Schlenker, Fabian and Denzer, Vera and Zimmer, Detmar, year=2019 
LibreCat: /record/22443
DOI: https://www.euspen.eu/knowledge-base/AM19129.pdf

@articleKünneke_Zimmer_2019, title=Schall mittels Pulver dämpfen, volume=6, journal=konstruktionspraxis, publisher=Vogel Communications Groupe GmbH &; Co. KG, author=Künneke, Thomas and Zimmer, Detmar, year=2019, pages=24–26 
LibreCat: /record/22444

@inproceedingsGräßler_Oleff_2019, title=Risikoorientierte Analyse und Handhabung von Anforderungsänderungen, volume=30, DOI= 10.35199/dfx2019.5, booktitle=Design for X - Beiträge zum 30. DfX-Symposium , author=Gräßler, I. and Oleff, C., year=2019, pages=49–60 
LibreCat: /record/22000
DOI:  10.35199/dfx2019.5

@inproceedingsGräßler_Oleff_Scholle_2019, title=Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme, DOI= 10.17619/UNIPB/1-791, booktitle=Fachtagung Mechatronik 2019 Paderborn, author=Gräßler, I. and Oleff, C. and Scholle, P., year=2019, pages=S. 1-6 
LibreCat: /record/22001
DOI:  10.17619/UNIPB/1-791

@inproceedingsGräßler_Thiele_Oleff_Scholle_Schulze_2019, title=Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme, DOI=10.17619/UNIPB/1-791, booktitle=International Conference on Engineering Design (ICE), author=Gräßler, I. and Thiele, H. and Oleff, C. and Scholle, P. and Schulze, V., year=2019, pages=1265–1274 
LibreCat: /record/22002
DOI: 10.17619/UNIPB/1-791

@inproceedingsMoritzer_Wächter_Elsner_2019, title=Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength, volume=30, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf, booktitle=30th Annual International Solid Freeform Fabrication Symposium, author=Moritzer, Elmar and Wächter, Julian and Elsner, M., year=2019, pages=856–863 
LibreCat: /record/22022
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf

@bookAhlers_Tröster_2019, place=Maastricht, series=EuroPM 2019 Congress &; Exhibition – SIS: Optimising the Properties of AM Parts using Hot Isostatic Pressing, title=Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V, publisher=EuroPM, author=Ahlers, Dominik and Tröster, Thomas, year=2019, collection=EuroPM 2019 Congress &; Exhibition – SIS: Optimising the Properties of AM Parts using Hot Isostatic Pressing 
LibreCat: /record/16825

@articleMoritzer_Hirsch_Heim_Cherif_Truemper_2019, title=Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites, volume=63, DOI=10.1007/s40194-019-00714-3, journal=Welding in the World, publisher=Springer, author=Moritzer, Elmar and Hirsch, André and Heim, H.P. and Cherif, C. and Truemper, W., year=2019, pages=867–873 
LibreCat: /record/22047
DOI: 10.1007/s40194-019-00714-3

@inproceedingsMoritzer_Hirsch_Bürenhaus_2019, title=Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures, volume=2065, DOI=10.1063/1.5088314, number=1, booktitle=AIP Conference Proceedings, publisher=AIP Publishing, author=Moritzer, Elmar and Hirsch, André and Bürenhaus, Franziska Isabelle, year=2019 
LibreCat: /record/22028
DOI: 10.1063/1.5088314

@inproceedingsSchöppner_Schumacher_Fels_2019, title=A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process, DOI=10.1063/1.5088315, booktitle=AIP Conference Proceedings, publisher=AIP Publishing, author=Schöppner, Volker and Schumacher, C. and Fels, C., year=2019 
LibreCat: /record/22027
DOI: 10.1063/1.5088315

@bookMoritzer_Hirsch_Paulus_2019, title=Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung, DOI=10.1007/978-3-658-27412-2, publisher=Springer Vieweg, author=Moritzer, Elmar and Hirsch, André and Paulus, S., year=2019, pages=185–198 
LibreCat: /record/22026
DOI: 10.1007/978-3-658-27412-2

@articleKruse_Mummert_2019, title=Mit 3D-Druck umfassende Teilhabe möglich machen , number=4, journal=Werkstatt:Dialog, author=Kruse, Anne and Mummert, Michael, year=2019, pages=34–35 
LibreCat: /record/36846

@inproceedingsKlippstein_Duchting_Reiher_Hengsbach_Menge_Schmid_2019, title=Devolopment, Production and post-processing of a topology optimized aircraft bracket , volume=30, booktitle=30th Annual International Solid Freeform Fabrication Symposium, author=Klippstein, Sven Helge and Duchting, Anne and Reiher, Thomas and Hengsbach, F. and Menge, Dennis and Schmid, Hans-Joachim, year=2019, pages=1932–1945 
LibreCat: /record/22202

@inproceedingsLammers_Tominski_Zimmer_2019, title=Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization, DOI=http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf, booktitle=II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, author=Lammers, Stefan and Tominski, Johannes and Zimmer, Detmar, year=2019, pages=174–185 
LibreCat: /record/22441
DOI: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf

@inproceedingsMoritzer_Hirsch_Hecker_2019, title=Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components, volume=30, DOI=http://dx.doi.org/10.26153/tsw/17308, booktitle=30th Annual International Solid Freeform Fabrication Symposium, author=Moritzer, Elmar and Hirsch, André and Hecker, Felix, year=2019, pages=705–714 
LibreCat: /record/22041
DOI: http://dx.doi.org/10.26153/tsw/17308

@bookTaube_Lammers_Urbanek_Mrozek_2018, series=FVA Abschlussbericht , title=Weichmagnetische Werkstoffe für die additive Fertigung von E-Motoren, volume=Heft 1286, publisher=Forschungsvereinigung Antriebstechnik e.V., author=Taube, Alexander and Lammers, Stefan and Urbanek, Stefan and Mrozek, Rafael, year=2018, collection=FVA Abschlussbericht  
LibreCat: /record/23736

@inproceedingsSchafran_Schramm_Risse_2018, title=Additive Fertigung in der modernen Orthopädietechnik - Anwendung und Forschungsansätze -, booktitle=DVM - AK Implantate und Biostrukturen, author=Schafran, T. and Schramm, B. and Risse, L., year=2018 
LibreCat: /record/22116

@articleSchramm_Risse_Brüggemann_Richard_Kullmer_2018, title=Additive manufacturing for medical applications, volume=2, journal=Journal of 3D Printing in medicine, author=Schramm, B. and Risse, L. and Brüggemann, J.P. and Richard, H.A. and Kullmer, G., year=2018 
LibreCat: /record/22117

@inproceedingsRisse_Schramm_Schafran_2018, title=Welche ingenieurstechnischen Perspektiven bietet die Versorgung durch additiv gefertigte Orthesen?, booktitle=PreDay AK Fußchirurgie, author=Risse, L. and Schramm, B. and Schafran, T., year=2018 
LibreCat: /record/22118

@inproceedingsKummert_Schmid_2018, title=The Influence of Contour Scanning Parameters and Strategy on Selective Laser Sintering  Build Part Properties, volume=29, booktitle=29th Annual International Solid Freeform Fabrication Symposium, author=Kummert, C. and Schmid, H.-J., year=2018 
LibreCat: /record/22120

@inproceedingsBrüggemann_Risse_Grübel_Richard_Kullmer_2018, title=Validierung der strukturmechanischen Funktionsfähigkeit durch experimentelle Bauteilprüfungen additiv gefertigter Leichtbaustrukturen, volume=250, DOI=10.1007/978-3-658-27412-2_1, booktitle=DVM - Bericht 250, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., author=Brüggemann, J.P. and Risse, L. and Grübel, A. and Richard, H.A. and Kullmer, G., year=2018, pages=89–98 
LibreCat: /record/22122
DOI: 10.1007/978-3-658-27412-2_1

@inproceedingsDsuban_Lohn_Brüggemann_Kullmer_2018, title=Entwicklung und Umsetzung eines Qualitätssicherungskonzeptes für die additive Fertigung, volume=403, booktitle=DVM - Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., author=Dsuban, A. and Lohn, J. and Brüggemann, J.P. and Kullmer, G., year=2018, pages=110–110 
LibreCat: /record/22125

@inproceedingsBrüggemann_Risse_Richard_Kullmer_2018, title=Entwicklung von Optimierungsstrategien unter Ausnutzung des Potentials der additiven Fer-tigung, volume=403, booktitle=DVM - Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., author=Brüggemann, J.P. and Risse, L. and Richard, H.A. and Kullmer, G., year=2018, pages=11–21 
LibreCat: /record/22126

@inproceedingsRisse_Schramm_Brüggemann_Woodcock_Kullmer_Richard_2018, title=CAE-gestützte Optimierung eines Hüftimplantats durch Ausnutzung der Potentiale additiver Fertigungsverfahren, volume=403, booktitle=DVM-Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., author=Risse, L. and Schramm, B. and Brüggemann, J.P. and Woodcock, S.C. and Kullmer, G. and Richard, H.A., year=2018, pages=89–100 
LibreCat: /record/22139

@inproceedingsJoy_Brüggemann_Kullmer_2018, title=Crack Growth Simulation with Adapcrack3D in 3D Structures under the influence of Temperature, booktitle=Procedia Structural Integrity, author=Joy, T.D. and Brüggemann, J.P. and Kullmer, G., year=2018, pages=in press 
LibreCat: /record/22145

@inproceedingsBrüggemann_Risse_Kullmer_Schramm_Richard_2018, title=Optimization of the fracture mechanical properties of additively manufactured EN AW-7075, DOI=10.1016/j.prostr.2018.12.052, booktitle=Procedia Structural Integrity, author=Brüggemann, J.P. and Risse, L. and Kullmer, G. and Schramm, B. and Richard, H.A., year=2018, pages=in press 
LibreCat: /record/22147
DOI: 10.1016/j.prostr.2018.12.052

@inproceedingsBrüggemann_Risse_Kullmer_Richard_2018, title=Fracture mechanical investigations on selective laser melted TiAl6, DOI=10.1016/j.prostr.2018.12.053, booktitle=Procedia Structural Integrity, author=Brüggemann, J.P. and Risse, L. and Kullmer, G. and Richard, H.A., year=2018, pages=in press 
LibreCat: /record/22148
DOI: 10.1016/j.prostr.2018.12.053

@inproceedingsRisse_Schramm_Brüggemann_Kullmer_Richard_2018, title=Entwicklung von steifigkeitsangepassten, lasergeschmolzenen Kurzschaft-Hüftendoprothesen, booktitle=Proceedings of the 15th Rapid.Tech Conference, author=Risse, L. and Schramm, B. and Brüggemann, J.P. and Kullmer, G. and Richard, H.A., year=2018, pages=405–417 
LibreCat: /record/22150

@inproceedingsMenge_Delfs_Töws_Schmid_2018, title=Topology Optimized Heat Transfer Using the Example of an Electronic Housing, volume=29, booktitle=29th Annual International Solid Freeform Fabrication Symposium, author=Menge, Dennis and Delfs, Patrick and Töws, Marcel and Schmid, Hans-Joachim, year=2018, pages=687–697 
LibreCat: /record/22183

@articleKummert_Josupeit_Schmid_2018, title=Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung, volume=70, DOI=10.1007/s11837-017-2658-2, number=3, journal=Journal of Minerals, Metals and Materials Society, publisher=Springer, author=Kummert, Christina and Josupeit, Stefan and Schmid, Hans-Joachim, year=2018, pages=425–430 
LibreCat: /record/22196
DOI: 10.1007/s11837-017-2658-2

@inproceedingsUrbanek_Ponick_Taube_Hoyer_Schaper_Lammers_Lieneke_Zimmer_2018, title=Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine, booktitle=Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, author=Urbanek, Stefan and Ponick, Bernd and Taube, Alexander and Hoyer, Kay-Peter and Schaper, Mirko and Lammers, Stefan and Lieneke, Tobias and Zimmer, Detmar, year=2018 
LibreCat: /record/22430

@inproceedingsTominski_Lammers_2018, title=Software-assisted design check of additive manufactured components, volume=14, DOI=https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted, booktitle=14th PERMAS Users’ Conference, author=Tominski, Johannes and Lammers, Stefan, year=2018 
LibreCat: /record/22433
DOI: https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted

@inproceedingsTominski_Lammers_Wulf_Zimmer_2018, title=Method for a Software-based Design Check of Additively Manufactured Components, volume=29, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf, booktitle=29th Annual International Solid Freeform Fabrication Symposium, author=Tominski, Johannes and Lammers, Stefan and Wulf, Christian and Zimmer, Detmar, year=2018 
LibreCat: /record/22434
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf

@inproceedingsKünneke_Bücker_Lieneke_Zimmer_2018, title=Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren, DOI=10.3139/9783446458123.008, booktitle=Proceedings of the 15th Rapid.Tech Conference, publisher=Carl Hanser Verlag GmbH &; Co. KG, author=Künneke, Thomas and Bücker, Sonja and Lieneke, Tobias and Zimmer, Detmar, year=2018, pages=128–143 
LibreCat: /record/22435
DOI: 10.3139/9783446458123.008

@articleJacob_Künneke_Lieneke_Baumann_Stricker_Zimmer_Lanza_2018, title=Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung, volume=113, DOI=https://doi.org/10.3139/104.112005, number=11, journal=ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, publisher=Carl Hanser Verlag, author=Jacob, Alexander and Künneke, Thomas and Lieneke, Tobias and Baumann, Tobias and Stricker, Nicole and Zimmer, Detmar and Lanza, Gisela, year=2018, pages=742–745 
LibreCat: /record/22436
DOI: https://doi.org/10.3139/104.112005

@bookBrückner_Künneke_Schadomsky_Strop_Zimmer_2018, title=Elektromechanische Antriebe, DOI=10.3139/9783446456198.009, publisher=Carl Hanser Verlag, author=Brückner, Uwe and Künneke, Thomas and Schadomsky, Magnus Hubert and Strop, Malte and Zimmer, Detmar, year=2018, pages=247–290 
LibreCat: /record/22506
DOI: 10.3139/9783446456198.009

@inproceedingsBüsching_Lindemann_Jahnke_Kruse_Koch_2018, title=Technology Integration into Existing Companies, volume=29, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf, booktitle=29th Annual International Solid Freeform Fabrication Symposium, author=Büsching, J. and Lindemann, C. and Jahnke, U. and Kruse, A. and Koch, R., year=2018, pages=14–31 
LibreCat: /record/21696
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf

@inproceedingsGraessler_Scholle_Hentze_Oleff_2018, title=SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS, DOI=10.21278/idc.2018.0298, booktitle=Proceedings of the DESIGN 2018 15th International Design Conference, author=Graessler, Iris and Scholle, Philipp and Hentze, Julian and Oleff, Christian, year=2018 
LibreCat: /record/21991
DOI: 10.21278/idc.2018.0298

@inproceedingsGräßler_Scholle_Hentze_Oleff_2018, title=Semi-Automatized Assessment of Requirement Interrelations, volume=15, DOI=10.21278/idc.2018.0298, booktitle=15th International Design Conference, author=Gräßler, I. and Scholle, P. and Hentze, J. and Oleff, C., year=2018, pages=S. 325-334 
LibreCat: /record/21998
DOI: 10.21278/idc.2018.0298

@inproceedingsGräßler_Oleff_Scholle_2018, title=Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte, volume=29, DOI=https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte, booktitle=Design for X - Beiträge zum 29. DfX-Symposium, author=Gräßler, I. and Oleff, C. and Scholle, P., year=2018, pages=333–344 
LibreCat: /record/21999
DOI: https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte

@inproceedingsSchumacher_Schöppner_Gnaase_2018, title=Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process, volume=29, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf, booktitle=29th Annual International Solid Freeform Fabrication Symposium, author=Schumacher, C. and Schöppner, Volker and Gnaase, S., year=2018, pages=1112–1120 
LibreCat: /record/22020
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf

@articleKnoop_Köhler_Lieneke_Zimmer_Schöppner_2018, title=Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen, volume=10, journal=Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, publisher=VDI Fachmedien GmbH &; Co. KG, author=Knoop, F. and Köhler, M. and Lieneke, Tobias and Zimmer, Detmar and Schöppner, Volker, year=2018, pages=83–88 
LibreCat: /record/22034

@articleKnoop_Lieneke_Schöppner_Zimmer_2018, title=Additive Fertigung nach Maß, volume=6, DOI=https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf, journal=Kunststoffe, author=Knoop, F. and Lieneke, Tobias and Schöppner, Volker and Zimmer, Detmar, year=2018, pages=70–73 
LibreCat: /record/22035
DOI: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf

@inproceedingsSchumacher_Schöppner_Gnaase_2018, title=Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process, volume=29, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf, booktitle=29th Annual International Solid Freeform Fabrication Symposium, author=Schumacher, C. and Schöppner, Volker and Gnaase, S., year=2018, pages=1112–1120 
LibreCat: /record/22043
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf

@bookClaes_Zeipert_Koppa_Tröster_Henning_2018, place=Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, title=Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen, author=Claes, Leander and Zeipert, Henning and Koppa, Peter and Tröster, Thomas and Henning, Bernd, year=2018 
LibreCat: /record/6594

@inproceedingsAhlers_Tröster_2018, title=Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V, author=Ahlers, Dominik and Tröster, Thomas, year=2018 
LibreCat: /record/16039

@inproceedingsKnoop_Schöppner_2018, title=Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process, volume=1, DOI=https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301, booktitle=SPE ANTEC 2018, publisher=Society of Plastics Engineers , author=Knoop, F. and Schöppner, Volker, year=2018 
LibreCat: /record/22046
DOI: https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301