@inproceedingsLammers_Tominski_Magerkohl_Künneke_Lieneke_Zimmer_2018, title=Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung, DOI=https://doi.org/10.3139/9783446458123.005, booktitle=Proceedings of the 15th Rapid.Tech Conference, author=Lammers, Stefan and Tominski, Johannes and Magerkohl, Sebastian and Künneke, Thomas and Lieneke, Tobias and Zimmer, Detmar, year=2018, pages=81–94 
LibreCat: /record/22438
DOI: https://doi.org/10.3139/9783446458123.005

@inproceedingsLammers_Tominski_Magerkohl_Lieneke_Künneke_Zimmer_2018, title=Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production, volume=29, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf, booktitle=29th Annual International Solid Freeform Fabrication Symposium, author=Lammers, Stefan and Tominski, Johannes and Magerkohl, Sebastian and Lieneke, Tobias and Künneke, Thomas and Zimmer, Detmar, year=2018 
LibreCat: /record/22431
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf

@inproceedingsAhlers_Tröster_Hermann_Koppa_Gloetter_Schaper_Peters_Burns_Hengsbach_Altmann_2018, title=Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing, DOI=10.7449/2018mst/2018/mst_2018_117_124, booktitle=Contributed Papers from MS&;, author=Ahlers, Dominik and Tröster, Thomas and Hermann, S. and Koppa, P. and Gloetter, P. and Schaper, Mirko and Peters, M. and Burns, M. and Hengsbach, F. and Altmann, A., year=2018 
LibreCat: /record/16048
DOI: 10.7449/2018mst/2018/mst_2018_117_124

@inbookMenge_Josupeit_Delfs_Schmid_2017, place=Wiesbaden, title=Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen, DOI=10.1007/978-3-658-17780-5, booktitle=Additive Fertigung von Bauteilen und Strukturen, publisher=Springer Vieweg, author=Menge, Dennis and Josupeit, Stefan and Delfs, Patrick10.1007/978-3-658-17780-5__and Schmid, Hans-Joachim, editor=Richard, Hans Albert and Schramm, Britta and Zipsner, ThomasEditors, year=2017, pages=105–120 
LibreCat: /record/23759
DOI: 10.1007/978-3-658-17780-5

@inproceedingsTaube_2017, title=Mechanische und mikrostrukturellen Eigenschaften additiv hergestellter Gitterstrukturen , booktitle=Hannover Messe Industrie, 2017, Hannover, author=Taube, A., year=2017 
LibreCat: /record/22110

@bookBrüggemann_Risse_Riemer_Reschetnik_Kullmer_Richard_2017, title=Entwicklung von Fahrradtretkurbelsystemen mittels additiver Fertigung, journal=Additive Fertigung von Bauteilen und Strukturen – Neue Erkenntnisse und Praxisbeispiele, author=Brüggemann, J.P. and Risse, L. and Riemer, A. and Reschetnik, W. and Kullmer, G. and Richard, H.A., year=2017 
LibreCat: /record/22112

@inproceedingsBauer_Reschetnik_Kullmer_Richard_2017, title=Methods for crack length measurement for the determination of fracture mechanical parameters of additive manufactured plastics, volume=14, booktitle=14th International Conference on Fracture, author=Bauer, B. and Reschetnik, W. and Kullmer, G. and Richard, H.A., year=2017 
LibreCat: /record/22119

@inproceedingsBauer_Reschetnik_Kullmer_Richard_2017, title=Risslängenmessung in additiv gefertigten Kunststoffproben auf Basis von Steifigkeitsänderungen infolge Ermüdungswachstum., booktitle=DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, author=Bauer, B. and Reschetnik, W. and Kullmer, G. and Richard, H.A., year=2017, pages=77–88 
LibreCat: /record/22127

@inproceedingsReschetnik_Brüggemann_Kullmer_Richard_2017, title=Bruchmechanische Charakterisierung von laserstrahlgeschmolzenen Werkstoffen, booktitle=DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., author=Reschetnik, W. and Brüggemann, J.P. and Kullmer, G. and Richard, H.A., year=2017, pages=147–156 
LibreCat: /record/22131

@inproceedingsBrüggemann_Reschetnik_Aydinöz_Richard_Kullmer_Hoyer_Schaper_2017, title=Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenen Aluminium 7075, booktitle=DVM - Tagung - Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., author=Brüggemann, J.P. and Reschetnik, W. and Aydinöz, M.E. and Richard, H.A. and Kullmer, G. and Hoyer, K.P. and Schaper, M., year=2017, pages=11–20 
LibreCat: /record/22133

@inproceedingsRisse_Brüggemann_Schramm_Kullmer_Richard_2017, title=Strukturoptimierung von Kurzschaft-Hüftendoprothesen durch den Einsatz der additiven Fertigung, booktitle=DVM - Tagung - Zuverlässigkeit von Implataten und Biostrukturen, author=Risse, L. and Brüggemann, J.P. and Schramm, B. and Kullmer, G. and Richard, H.A., year=2017 
LibreCat: /record/22134

@inproceedingsBrüggemann_Risse_Richard_Kullmer_2017, title=Vergleich zweier Optimierungsstrategien am Beispiel additiv gefertigter Rennradvorbauten, booktitle=DVM Tagung - Additiv gefertigte Bauteile und Strukturen, author=Brüggemann, J.P. and Risse, L. and Richard, H.A. and Kullmer, G., year=2017, pages=49–66 
LibreCat: /record/22135

@inproceedingsBauer_Reschetnik_Kullmer_Richard_2017, title=Konzepte zur Risslängenmessung an additive gefertigten Kunststoffen , booktitle=DVM Tagung - Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, author=Bauer, B. and Reschetnik, W. and Kullmer, G. and Richard, H.A., year=2017, pages=21–30 
LibreCat: /record/22136

@inproceedingsBrüggemann_Risse_Schramm_Richard_2017, title=Entwicklung einer additiv gefertigten Fußorthese, booktitle=Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, author=Brüggemann, J.P. and Risse, L. and Schramm, B. and Richard, H.A., year=2017, pages=26–37 
LibreCat: /record/22151

@inproceedingsBauer_Reschetnik_Kullmer_Richard_2017, title=Crack length measurement of additive manufactured plastics based on the current potential drop method., booktitle=Symposium on Fatigue and Fracture of Additive Manufactured Materials and Components, author=Bauer, B. and Reschetnik, W. and Kullmer, G. and Richard, H.A., year=2017 
LibreCat: /record/22153

@articleWiesener_Peters_Taube_Keller_Hoyer_Niendorf_Grundmeier_2017, title=Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting, volume=68, DOI=10.1002/maco.201709478, number=10, journal=Materials and Corrosion, author=Wiesener, M. and Peters, K. and Taube, A. and Keller, A. and Hoyer, K.P. and Niendorf, T. and Grundmeier, G., year=2017, pages=1028–1036 
LibreCat: /record/22165
DOI: 10.1002/maco.201709478

@articleJosupeit_Schmid_2017, title=Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories, volume=134, DOI=10.1002/app.45435, number=42, journal=Journal of Applied Polymer Science, publisher=Wiley, author=Josupeit, Stefan and Schmid, Hans-Joachim, year=2017 
LibreCat: /record/22195
DOI: 10.1002/app.45435

@bookKünneke_Zimmer_2017, title=Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen, DOI=10.1007/978-3-658-17780-5, publisher=Springer Fachmedien Wiesbaden GmbH, author=Künneke, Thomas and Zimmer, Detmar, year=2017, pages=61–74 
LibreCat: /record/22419
DOI: 10.1007/978-3-658-17780-5

@inproceedingsLammers_Quattrone_Mrozek_Zimmer_Schmid_Ponick_Hoffmann_2017, title=Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine, DOI=10.3139/9783446454606.006, booktitle=Proceedings of the 14th Rapid.Tech Conference, publisher=Hanser Verlag, author=Lammers, Stefan and Quattrone, Francesco and Mrozek, Rafael and Zimmer, Detmar and Schmid, Hans-Joachim and Ponick, Bernd and Hoffmann, Michael, year=2017, pages=80–93 
LibreCat: /record/22420
DOI: 10.3139/9783446454606.006

@inproceedingsLieneke_Adam_Josupeit_Delfs_Zimmer_2017, title=Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern, DOI=10.3139/9783446454606.024 , booktitle=Proceedings of the 14th Rapid.Tech Conference, publisher=Hanser Verlag, author=Lieneke, Tobias and Adam, Guido and Josupeit, Stefan and Delfs, Patrick and Zimmer, Detmar, year=2017, pages=327–344 
LibreCat: /record/22421
DOI: 10.3139/9783446454606.024 

@inproceedingsKnoop_Lieneke_2017, title=Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling, booktitle=Inside 3D Printing 2017, author=Knoop, Frederick and Lieneke, Tobias, year=2017 
LibreCat: /record/22422

@inproceedingsLieneke_Denzer_Zimmer_2017, title=Geometrische Toleranzen für additive Fertigungsverfahren, volume=3, booktitle=3. Summer School Toleranzmangement 2017, author=Lieneke, Tobias and Denzer, Vera and Zimmer, Detmar, year=2017 
LibreCat: /record/22425

@articleEschner_Kopf_Lieneke_Künneke_Berger_Häfner_Lanza_Zimmer_2017, title=Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette, volume=112, DOI=10.3139/104.111751, number=7–8, journal=ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, publisher=De Gruyter, author=Eschner, Niclas and Kopf, Robin and Lieneke, Tobias and Künneke, Thomas and Berger, Dietrich and Häfner, Benjamin and Lanza, Gisela and Zimmer, Detmar, year=2017, pages=469–472 
LibreCat: /record/22426
DOI: 10.3139/104.111751

@inproceedingsDeppe_Koch_Kaesberg_2017, title=Rational Decision-Making for the Beneficial Application of Additive Manufacturing, volume=28, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf, booktitle=28th Annual International Solid Freeform Fabrication Symposium, author=Deppe, G. and Koch, R. and Kaesberg, M., year=2017, pages=2597–2611 
LibreCat: /record/21690
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf

@inproceedingsReiher_Vogelsang_Koch_2017, title=Computer integration for geometry generation for product optimization with Additive Manufacturing, volume=28, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf, booktitle=28th Annual International Solid Freeform Fabrication Symposium, author=Reiher, T. and Vogelsang, S. and Koch, R., year=2017, pages=903–921 
LibreCat: /record/21691
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf

@inproceedingsKruse_Reiher_Koch_2017, title=Integrating AM into existing companies - selection of existing parts for increase of acceptance, volume=28, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf, booktitle=28th Annual International Solid Freeform Fabrication Symposium, author=Kruse, A. and Reiher, T. and Koch, R., year=2017, pages=2575–2584 
LibreCat: /record/21692
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf

@inproceedingsJahnke_Koch_Oppermann_2017, title=Design for protection: Systematic approach to prevent product piracy during product development using AM , volume=28, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf, booktitle=28th Annual International Solid Freeform Fabrication Symposium, author=Jahnke, U. and Koch, R. and Oppermann, A. T., year=2017, pages=2481–2492 
LibreCat: /record/21693
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf

@inproceedingsBüsching_Koch_2017, title=Ramp-Up-Management in Additive Manufacturing – Technology Integration in existing Business Processes, volume=28, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RampUpManagementinAdditiveManufacturingTec.pdf, booktitle=28th Annual International Solid Freeform Fabrication Symposium, author=Büsching, J. and Koch, R., year=2017, pages=2585–2596 
LibreCat: /record/21694
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RampUpManagementinAdditiveManufacturingTec.pdf

@inproceedingsReiher_Vogelsang_Koch_2017, title=Computer integration for geometry generation for product optimization with Additive Manufacturing, volume=28, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf, booktitle=28th Annual International Solid Freeform Fabrication Symposium, author=Reiher, T. and Vogelsang, S. and Koch, R., year=2017, pages=903–921 
LibreCat: /record/21695
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf

@articleDeppe_Lindemann_2017, title=Hybrid Manufacturing with Additive Manufacturing, volume=17, DOI=https://www.cecimo.eu/wp-content/uploads/2019/03/CECIMO-Magazine-Spring-2017-LQ.pdf, number=11, journal=CECIMO Magazine, author=Deppe, G. and Lindemann, C., year=2017, pages=28–29 
LibreCat: /record/21697
DOI: https://www.cecimo.eu/wp-content/uploads/2019/03/CECIMO-Magazine-Spring-2017-LQ.pdf

@articleReiher_Lindemann_Jahnke_Deppe_Koch_2017, title=Holistic approach for industrializing AM technology - from part selection to test and verification, volume=2, DOI=https://doi.org/10.1007/s40964-017-0018-y, journal=Progress in Additive Manufacturing, publisher=Springer, author=Reiher, T. and Lindemann, C. and Jahnke, U. and Deppe, G. and Koch, R., year=2017, pages=43–55 
LibreCat: /record/21704
DOI: https://doi.org/10.1007/s40964-017-0018-y

@inproceedingsKnoop_Lieneke_Schöppner_2017, title=Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling, DOI=10.3139/9783446454606.004, booktitle=Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, author=Knoop, F. and Lieneke, Tobias and Schöppner, Volker, year=2017, pages=52–66 
LibreCat: /record/22040
DOI: 10.3139/9783446454606.004

@inproceedingsSchumacher_Schöppner_Guntermann_2017, title=Considering machine- and process-specific influences to create custom-built specimens for the Fused Deposition Modeling process, volume=28, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf, booktitle=28th Annual International Solid Freeform Fabrication Symposium, author=Schumacher, C. and Schöppner, Volker and Guntermann, J., year=2017, pages=470–484 
LibreCat: /record/22042
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf

@inproceedingsKnoop_Schöppner_2017, title=Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling, volume=28, DOI=http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf, booktitle=28th Annual International Solid Freeform Fabrication Symposium, author=Knoop, F. and Schöppner, Volker, year=2017, pages=2757–2776 
LibreCat: /record/22045
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf

@articleSchöppner_Schumacher_Guntermann_2017, title=Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess, volume=1, number=1, journal=Jahresmagazin Kunststofftechnik, publisher=Institut für Wissenschaftliche Veröffentlichungen, author=Schöppner, Volker and Schumacher, C. and Guntermann, J., year=2017, pages=108–114 
LibreCat: /record/22049

@inproceedingsClaes_Zeipert_Koppa_Tröster_Henning_2017, place=Honolulu, title=Additively manufactured acoustic diffuser structures for ultrasonic measurement applications, DOI=10.1121/2.0000688, booktitle=Proceedings of Meetings on Acoustics, author=Claes, Leander and Zeipert, Henning and Koppa, Peter and Tröster, Thomas and Henning, Bernd, year=2017, pages=030004 
LibreCat: /record/6559
DOI: 10.1121/2.0000688

@inproceedingsAhlers_Tröster_2017, title=Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V, author=Ahlers, Dominik and Tröster, Thomas, year=2017 
LibreCat: /record/16063

@inproceedingsAhlers_Tröster_2017, title=Materialkombinationen in der additive Fertigung, author=Ahlers, Dominik and Tröster, Thomas, year=2017 
LibreCat: /record/16074

@inproceedingsAhlers_Tröster_2017, title=Aspekte der Produktentwicklung in der additiven Fertigung, author=Ahlers, Dominik and Tröster, Thomas, year=2017 
LibreCat: /record/16075

@articleMoritzer_Hirsch_Günther_Sonntag_Klotzbach_Lasagni_2017, title=Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems, volume=8, DOI=10.3390/mi8080246, number=246, journal=Micromachines, publisher=MDPI, author=Moritzer, Elmar and Hirsch, André and Günther, K. and Sonntag, F. and Klotzbach, U. and Lasagni, A.F., year=2017 
LibreCat: /record/22038
DOI: 10.3390/mi8080246

@articleFischer_Schöppner_2017, title=Fatigue Behavior of FDM Parts Manufactured with Ultem 9085, DOI=10.1007/s11837-016-2197-2, journal=JOM: The Journal of The Minerals. Metals &; Materials Society (TMS), publisher=Springer Verlag, author=Fischer, M. and Schöppner, Volker, year=2017, pages=563–568 
LibreCat: /record/22033
DOI: 10.1007/s11837-016-2197-2

@inproceedingsKnoop_Kloke_Schöppner_2017, title=Quality Improvement of FDM Parts by Parameter Optimization , volume=32, DOI=10.1063/1.5016790, booktitle=32nd International Conference of the Polymer Processing Society, publisher=American Institute of Physics, author=Knoop, F. and Kloke, A. and Schöppner, Volker, year=2017 
LibreCat: /record/22023
DOI: 10.1063/1.5016790

@inproceedingsAhlers_Koppa_Hengsbach_Gloetter_Altmann_Schaper_Tröster_2017, title=Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing, booktitle=Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, author=Ahlers, Dominik and Koppa, Peter and Hengsbach, F. and Gloetter, P. and Altmann, A. and Schaper, Mirko and Tröster, Thomas, year=2017 
LibreCat: /record/16066

@bookKloke_2016, place=Düren, series=Forschungsberichte des Direct Manufacturing Research Centers, title=Untersuchung der Werkstoff-, Prozess- und Bauteileigenschaften beim Fused Deposition Modeling Verfahren, volume=4, publisher=Shaker Verlag, author=Kloke, Agnes, year=2016, collection=Forschungsberichte des Direct Manufacturing Research Centers 
LibreCat: /record/24774

@bookLeuders_2016, place=Düren, series=Forschungsberichte des Direct Manufacturing Research Centers, title=Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen, volume=5, publisher=Düren Verlag GmbH, author=Leuders, Stefan, year=2016, collection=Forschungsberichte des Direct Manufacturing Research Centers 
LibreCat: /record/24897

@bookKanagarajah_2016, series=Forschungsberichte des Direct Manufacturing Research Centers, title=Ermüdungsverhalten und mikrostrukturelle Charakterisierung der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel 939, volume=6, author=Kanagarajah, Pirabagini, year=2016, collection=Forschungsberichte des Direct Manufacturing Research Centers 
LibreCat: /record/26901

@bookLammers_Quattrone_Mrozek_2016, series=FVA Abschlussbericht , title=Machbarkeitsstudie 3D Druck Elektromotoren, volume=Nr. 1189, publisher=Forschungsvereinigung Antriebstechnik e.V., author=Lammers, Stefan and Quattrone, Francesco and Mrozek, Rafael, year=2016, collection=FVA Abschlussbericht  
LibreCat: /record/23737

@inproceedingsBrüggemann_Reschetnik_Richard_Kullmer_Schramm_2016, title=Festigkeits- und leichtbauoptimierte Konstruktion und Auslegung eines additiv gefertigten Fahrradvorbaus, DOI=10.3139/9783446450608.025, booktitle=Rapid Tech - International Trade Show &; Conference for Additive Manufacturing, author=Brüggemann, J.P. and Reschetnik, W. and Richard, H.A. and Kullmer, G. and Schramm, B., year=2016, pages=290–300 
LibreCat: /record/22107
DOI: 10.3139/9783446450608.025

@inproceedingsReschetnik_Grylls_Bauer_Richard_Kullmer_2016, title=Fatigue Life Manipulation of SLM Parts, author=Reschetnik, W. and Grylls, R. and Bauer, B. and Richard, H.A. and Kullmer, G., year=2016 
LibreCat: /record/22109

@inproceedingsBrüggemann_Riemer_Reschetnik_Aydinöz_Kullmer_Richard_Schaper_2016, title=Optimierung von Fahrradtretkurbeln mittels additiver Fertigung, booktitle=DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., author=Brüggemann, J.P. and Riemer, A. and Reschetnik, W. and Aydinöz, M.E. and Kullmer, G. and Richard, H.A. and Schaper, M., year=2016, pages=101–112 
LibreCat: /record/22128