Risse, L., B. Schramm, J.P. Brüggemann, G. Kullmer, and H.A. Richard. “Entwicklung von Steifigkeitsangepassten, Lasergeschmolzenen Kurzschaft-Hüftendoprothesen.” In Proceedings of the 15th Rapid.Tech Conference, 405–17, 2018.
LibreCat: /record/22150

Menge, Dennis, Patrick Delfs, Marcel Töws, and Hans-Joachim Schmid. “Topology Optimized Heat Transfer Using the Example of an Electronic Housing.” In 29th Annual International Solid Freeform Fabrication Symposium, 29:687–97, 2018.
LibreCat: /record/22183

Kummert, Christina, Stefan Josupeit, and Hans-Joachim Schmid. “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.”https://doi.org/10.1007/s11837-017-2658-2__Journal of Minerals, Metals and Materials Society 70, no. 3 (2018): 425–30.https://doi.org/10.1007/s11837-017-2658-2 .
LibreCat: /record/22196
DOI: 10.1007/s11837-017-2658-2

Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat: /record/22430

Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of Additive Manufactured Components.”https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted__In 14th PERMAS Users’ Conference, Vol. 14, 2018.https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted .
LibreCat: /record/22433
DOI: https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted

Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer. “Method for a Software-Based Design Check of Additively Manufactured Components.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, Vol. 29, 2018.http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf .
LibreCat: /record/22434
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf

Künneke, Thomas, Sonja Bücker, Tobias Lieneke, and Detmar Zimmer. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.”https://doi.org/10.3139/9783446458123.008__In Proceedings of the 15th Rapid.Tech Conference, 128–43. Carl Hanser Verlag GmbH &; Co. KG, 2018.https://doi.org/10.3139/9783446458123.008 .
LibreCat: /record/22435
DOI: 10.3139/9783446458123.008

Jacob, Alexander, Thomas Künneke, Tobias Lieneke, Tobias Baumann, Nicole Stricker, Detmar Zimmer, and Gisela Lanza. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.”https://doi.org/10.3139/104.112005__ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 113, no. 11 (2018): 742–45.https://doi.org/10.3139/104.112005 .
LibreCat: /record/22436
DOI: https://doi.org/10.3139/104.112005

Brückner, Uwe, Thomas Künneke, Magnus Hubert Schadomsky, Malte Strop, and Detmar Zimmer. Elektromechanische Antriebe. Carl Hanser Verlag, 2018.https://doi.org/10.3139/9783446456198.009 .
LibreCat: /record/22506
DOI: 10.3139/9783446456198.009

Büsching, J., C. Lindemann, U. Jahnke, A. Kruse, and R. Koch. “Technology Integration into Existing Companies.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, 29:14–31, 2018.http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf .
LibreCat: /record/21696
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf

Graessler, Iris, Philipp Scholle, Julian Hentze, and Christian Oleff. “SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS.”https://doi.org/10.21278/idc.2018.0298__In Proceedings of the DESIGN 2018 15th International Design Conference, 2018.https://doi.org/10.21278/idc.2018.0298 .
LibreCat: /record/21991
DOI: 10.21278/idc.2018.0298

Gräßler, I., P. Scholle, J. Hentze, and C. Oleff. “Semi-Automatized Assessment of Requirement Interrelations.”https://doi.org/10.21278/idc.2018.0298__In 15th International Design Conference, 15:S. 325-334, 2018.https://doi.org/10.21278/idc.2018.0298 .
LibreCat: /record/21998
DOI: 10.21278/idc.2018.0298

Gräßler, I., C. Oleff, and P. Scholle. “Methode Zur Bewertung von Anforderungsänderungen Additiv Gefertigter Produkte.”https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte__In Design for X - Beiträge Zum 29. DfX-Symposium, 29:333–44, 2018.https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte .
LibreCat: /record/21999
DOI: https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte

Schumacher, C., Volker Schöppner, and S. Gnaase. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, 29:1112–20, 2018.http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf .
LibreCat: /record/22020
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf

Knoop, F., M. Köhler, Tobias Lieneke, Detmar Zimmer, and Volker Schöppner. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen Einlegern in FDM-Strukturen.” Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe 10 (2018): 83–88.
LibreCat: /record/22034

Knoop, F., Tobias Lieneke, Volker Schöppner, and Detmar Zimmer. “Additive Fertigung Nach Maß.”https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf__Kunststoffe 6 (2018): 70–73.https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf .
LibreCat: /record/22035
DOI: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf

Schumacher, C., Volker Schöppner, and S. Gnaase. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, 29:1112–20, 2018.http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf .
LibreCat: /record/22043
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf

Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd Henning. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
LibreCat: /record/6594

Ahlers, Dominik, and Thomas Tröster. “Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” 2018.
LibreCat: /record/16039

Knoop, F., and Volker Schöppner. “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process.”https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301__In SPE ANTEC 2018, Vol. 1. Society of Plastics Engineers , 2018.https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301 .
LibreCat: /record/22046
DOI: https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301