Risse, L., et al. “Entwicklung von Steifigkeitsangepassten, Lasergeschmolzenen Kurzschaft-Hüftendoprothesen.” Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 405–17.
LibreCat: /record/22150

Menge, Dennis, et al. “Topology Optimized Heat Transfer Using the Example of an Electronic Housing.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, pp. 687–97.
LibreCat: /record/22183

Kummert, Christina, et al. “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.”10.1007/s11837-017-2658-2__Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, Springer, 2018, pp. 425–30, doi:10.1007/s11837-017-2658-2.
LibreCat: /record/22196
DOI: 10.1007/s11837-017-2658-2

Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat: /record/22430

Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of Additive Manufactured Components.”https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted__14th PERMAS Users’ Conference, vol. 14, 2018, doi:https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
LibreCat: /record/22433
DOI: https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted

Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively Manufactured Components.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf__29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
LibreCat: /record/22434
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf

Künneke, Thomas, et al. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.”10.3139/9783446458123.008__Proceedings of the 15th Rapid.Tech Conference, Carl Hanser Verlag GmbH &; Co. KG, 2018, pp. 128–43, doi:10.3139/9783446458123.008.
LibreCat: /record/22435
DOI: 10.3139/9783446458123.008

Jacob, Alexander, et al. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.”https://doi.org/10.3139/104.112005__ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, vol. 113, no. 11, Carl Hanser Verlag, 2018, pp. 742–45, doi:https://doi.org/10.3139/104.112005.
LibreCat: /record/22436
DOI: https://doi.org/10.3139/104.112005

Brückner, Uwe, et al. Elektromechanische Antriebe. Carl Hanser Verlag, 2018, pp. 247–90, doi:10.3139/9783446456198.009.
LibreCat: /record/22506
DOI: 10.3139/9783446456198.009

Büsching, J., et al. “Technology Integration into Existing Companies.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf__29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, pp. 14–31, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf.
LibreCat: /record/21696
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf

Graessler, Iris, et al. “SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS.”10.21278/idc.2018.0298__Proceedings of the DESIGN 2018 15th International Design Conference, 2018, doi:10.21278/idc.2018.0298.
LibreCat: /record/21991
DOI: 10.21278/idc.2018.0298

Gräßler, I., et al. “Semi-Automatized Assessment of Requirement Interrelations.”10.21278/idc.2018.0298__15th International Design Conference, vol. 15, 2018, p. S. 325-334, doi:10.21278/idc.2018.0298.
LibreCat: /record/21998
DOI: 10.21278/idc.2018.0298

Gräßler, I., et al. “Methode Zur Bewertung von Anforderungsänderungen Additiv Gefertigter Produkte.”https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte__Design for X - Beiträge Zum 29. DfX-Symposium, vol. 29, 2018, pp. 333–44, doi:https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte.
LibreCat: /record/21999
DOI: https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte

Schumacher, C., et al. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf__29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, pp. 1112–20, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat: /record/22020
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf

Knoop, F., et al. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen Einlegern in FDM-Strukturen.” Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe, vol. 10, VDI Fachmedien GmbH &; Co. KG, 2018, pp. 83–88.
LibreCat: /record/22034

Knoop, F., et al. “Additive Fertigung Nach Maß.”https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf__Kunststoffe, vol. 6, 2018, pp. 70–73, doi:https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat: /record/22035
DOI: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf

Schumacher, C., et al. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf__29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, pp. 1112–20, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat: /record/22043
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf

Claes, Leander, et al. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. 2018.
LibreCat: /record/6594

Ahlers, Dominik, and Thomas Tröster. Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. 2018.
LibreCat: /record/16039

Knoop, F., and Volker Schöppner. “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process.”https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301__SPE ANTEC 2018, vol. 1, Society of Plastics Engineers , 2018, doi:https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat: /record/22046
DOI: https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301