Sajadi, Said. Charakterisierung und Bewertung von flammgeschützten P Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess, 2023.

Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, Vol. 34. Austin: Laboratory for Freeform Fabrication and University of Texas, 2023.

Koers, Thorsten, and Balázs Magyar. “Compensation of the Shrinkage Behavior Occurring in Cylindrical Components in the FDM Process.”https://doi.org/10.1002/masy.202200185__In Macromolecular Symposia, edited by Giuseppe Lamanna and Constantin Opran, Vol. 411. Wiley, 2023.https://doi.org/10.1002/masy.202200185 .

Bieber, Maximilian, Michael Haase, Frederik Tasche, Alexander Zibart, and Bernd Ponick. “Additively Manufactured Air-Cooled Lightweight Rotor for an Automotive Electric Motor.”https://doi.org/10.1109/iemdc55163.2023.10238918__In 2023 IEEE International Electric Machines &;amp; Drives Conference (IEMDC). IEEE, 2023.https://doi.org/10.1109/iemdc55163.2023.10238918 .

Bödger, Christian, Stefan Gnaase, Dennis Lehnert, and Thomas Tröster. “Investigation of the Influence of Process Parameters on Productivity in the LPBF Process for the Material Inconel 718.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2023.

Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.”https://doi.org/10.1002/masy.202200181__Macromolecular Symposia 411, no. 1 (2023).https://doi.org/10.1002/masy.202200181 .

Moritzer, Elmar, Felix Hecker, Felix Knaup, and Julian Wächter. “Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process.”https://doi.org/10.1063/5.0168548__In Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), 170001-1-170001–5. Fukuoka (Japan): AIP Publishing, 2023.https://doi.org/10.1063/5.0168548 .

Koers, Thorsten, and Balázs Magyar. “Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, Vol. 34, 2023.

Lammers, Stefan, Thorsten Koers, Balázs Magyar, Detmar Zimmer, and Tobias Lieneke. “Depiction of Support Structures in Technical Drawings.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, Vol. 34, 2023.

Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.”https://doi.org/10.26153/tsw/50931__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50931 .

Neitzel, Fabian, Ivo Kletetzka, and Hans-Joachim Schmid. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.”https://doi.org/10.26153/tsw/50926__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50926 .

Klippstein, Sven Helge. “Reproducibility in Polymer Laser Sintering,” 2022.

Haase, Michael, Frederik Tasche, Maximilian Bieber, and Alexander Zibart. Innovative Leichtbau- Und Kühlungskonzepte Für Elektrische Maschinen Durch Additive  Fertigung (ILuKadd3D). Vol. Heft 1526. Frankfurt: Forschungsvereinigung Antriebstechnik e.V., 2022.

Klippstein, Sven Helge. “Neue Polymerwerkstoffe - Der Schlüssel für die Industrialisierung.” 7. AM Forum Berlin, 2022.

Moritzer, Elmar, and Christian Lennart Elsner. “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts.”https://doi.org/10.1002/masy.202100390__Macromolecular Symposia 404, no. 1 (2022).https://doi.org/10.1002/masy.202100390 .

Moritzer, Elmar, and Julian Wächter. “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process.”https://doi.org/10.1002/masy.202100389__Macromolecular Symposia 404, no. 1 (2022).https://doi.org/10.1002/masy.202100389 .

Moritzer, Elmar, and Christian Lennart Elsner. “Mit Gestaltungsrichtlinien zum Erfolg.” Kunststoffe, 2022.

Moritzer, Elmar, and Christine Driediger. “Reactive Direct Bonding of Digital Light Process Components.”https://doi.org/10.1002/masy.202100396__Macromolecular Symposia 404, no. 1 (2022).https://doi.org/10.1002/masy.202100396 .

Rüther, Moritz Johannes, Sven Helge Klippstein, SathishKumar Ponusamy, Steffen Jesinghausen, and Hans-Joachim Schmid. “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2.” Werkstoffe 6 (2022): 18–19.

Rüther, Moritz Johannes, Sven Helge Klippstein, SathishKumar Ponusamy, Steffen Jesinghausen, and Hans-Joachim Schmid. “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1.” Werkstoffe 5 (2022): 28–29.