Schall CWT. Materialschonende Verarbeitung von Thermoplasten auf Wave-Schnecken. Vol Band 2/2024. Shaker Verlag; 2024.

Richters M. Herstellung und Charakterisierung von Wood-Plastic-Composites (WPC) mit einer Matrix aus thermoplastischen Polyurethanen zur Erzeugung einer Holz-WPC-Verbundstruktur .; 2024.

Hamdoun A, Mahnken R. Experimental investigations of uniaxial and biaxial cold stretching within PCfilms and bars using optical measurements. PAMM. Published online 2024. doi:10.1002/pamm.202300114

Lenz P, Mahnken R. Multiscale simulation of polymer curing of composites combined mean-field homogenisation methods at large strains. International Journal of Solids and Structures. 2024;290. doi:10.1016/j.ijsolstr.2023.112642

Flachmann F. Untersuchung des Füllverhaltens holzfaserverstärkter Kunststoffe (WPC) mit hohen Füllstoffgehalten. Vol Band 4. Shaker Verlag; 2024.

Frank M. Simulationsgestützte Bestimmung und Optimierung der Mischgüte in der Einschneckenextrusion. Vol 2024,5. Shaker Verlag; 2024.

Mahnken R, Westermann H. Construction of A-stable explicit last-stage diagonal implicit Runge–Kutta (ELDIRK) methods. Computational Mechanics. Published online 2024. doi:10.1007/s00466-024-02442-y

Milaege D, Eschemann N, Hoyer K-P, Schaper M. Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion. Crystals. 2024;14(2). doi:10.3390/cryst14020117

Richters M. Herstellung Und Charakterisierung von Wood-Plastic-Composites (WPC) Mit Einer Matrix Aus Thermoplastischen Polyurethanen Zur Erzeugung Einer Holz-WPC-Verbundstruktur .; 2024. doi:978-3-8440-9390-2

Hirsch A. Ein Beitrag Zur Erarbeitung von Fertigungsrichtlinien Für Das Kunststoff Freiformen .; 2024. doi:978-3-8440-9409-1

Schall CWT. Materialschonende Verarbeitung von Thermoplasten Auf Wave-Schnecken.; 2024. doi:978-3-8440-9354-4

Schadomsky M. Experimentelle Und Simulative Analyse Der Mischwirkung in Einschneckenextrudern.; 2024. doi:978-3-8440-9334-6

Moritzer E, Elsner CL. Evaluation of the Influence of Particle Type, Shape and Size on the Thermal Conductivity of Filled Polymers in the Fused Filament Fabrication Process. In: ; 2024.

Hamdoun A, Mahnken R. A large deformation gradient theory for glassy polymers by means of micromorphic regularization. Archive of Applied Mechanics. 2024;94(5):1221-1242. doi:10.1007/s00419-024-02570-0

Hamdoun A, Mahnken R. Uniaxial and biaxial experimental investigation of glassy polymers. Polymer. 2024;299. doi:10.1016/j.polymer.2024.126981

Kröker M. Experimentelle Und Modellbasierte Untersuchungen Zum Prozessverhalten von Teilkristallinen Materialien Im Spritzgießsonderverfahren GITBlow.; 2023.

Penner E, Caylak I, Mahnken R. Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations. Fibers and Polymers. Published online 2023. doi:10.1007/s12221-023-00122-x

Lenz P, Mahnken R. Non-local integral-type damage combined to mean-field homogenization methods for composites and its parallel implementation. Composite Structures. Published online 2023. doi:10.1016/j.compstruct.2023.116911

Ostermann M, Grenz J, Triebus M, et al. Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures. Energies. 2023;16(8). doi:10.3390/en16083371

Voswinkel D. Application of a new strategy for time-efficient laser treatment of galvanized steel substrates to improve the adhesion properties. Journal of Manufacturing Processes. 2023;94:10-19. doi:/10.1016/j.jmapro.2023.03.056

Grydin O, Garthe K-U, Yuan X, et al. Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips. In: Broek S, ed. Light Metals 2023. The Minerals, Metals &; Materials Series. Springer Nature Switzerland; 2023:1031-1037. doi:10.1007/978-3-031-22532-1_137

Moritzer E, Flachmann F. Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures. Journal of Cellular Plastics. 2023;59(3):187-199. doi:10.1177/0021955x231161175

Lückenkötter J, Leimbach JP, Stallmeister T, Marten T, Tröster T. Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector. In: Materials Research Proceedings. Vol 28. Materials Research Forum LLC; 2023:249-258. doi:10.21741/9781644902479-27

Lenz P, Mahnken R. Thermochemomechanical modelling of a curing process combined with meanfield homogenization methods at large strains. PAMM. 2023;22(1). doi:10.1002/pamm.202200214

Cheng C, Song C, Mahnken R, Yuan Z, Yu L, Ju X. A Non-Linear Mean-Field Debonding Model at Large Strains for the Analysis of Fibre Kinking in Ud Composites. Published online 2023.

Westermann H, Mahnken R. A thermodynamic framework for the phasefield approach considering carbide precipitation during phase transformations. PAMM. 2023;22(1). doi:10.1002/pamm.202200080

Hamdoun A, Mahnken R. A finite strain gradient theory for viscoplasticity by means of micromorphic regularization. PAMM. 2023;22(1). doi:10.1002/pamm.202200074

Ostermann M, Behm J, Marten T, et al. Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility. In: Proff H, ed. Towards the New Normal in Mobility. Springer Fachmedien Wiesbaden; 2023. doi:10.1007/978-3-658-39438-7_25

Tchomgue Simeu A, Mahnken R. Goaloriented adaptivity based on a model hierarchy of meanfield and fullfield homogenization methods in elastoplasticity. PAMM. 2023;22(1). doi:10.1002/pamm.202200053

Gnaase S, Niggemeyer D, Lehnert D, Bödger C, Tröster T. Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709. Crystals. 2023;13(2). doi:10.3390/cryst13020157

Mahnken R. Derivation of third order Runge–Kutta methods (ELDIRK) by embedding of lower order implicit time integration schemes for local and global error estimation. Computational Mechanics. Published online 2023. doi:10.1007/s00466-023-02347-2

Grenz J, Ostermann M, Käsewieter K, et al. Integrating Prospective LCA in the Development of Automotive Components. Sustainability. 2023;15(13). doi:10.3390/su151310041

Ostermann M, Behm J, Marten T, Tröster T. NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen. In: WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte. ; 2023.

Tchomgue Simeu A, Mahnken R. Mesh- and model adaptivity for elasto-plastic mean-field and full-field homogenization based on downwind  and upwind approximations. In: XI International Conference on Adaptive Modeling and Simulation. CIMNE; 2023. doi:10.23967/admos.2023.054

Wu S, Delp A, Freund J, et al. Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process. The Journal of Adhesion. Published online 2023:1-29. doi:10.1080/00218464.2023.2245758

Freund J, Löbbecke M, Delp A, et al. Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints. The Journal of Adhesion. Published online 2023:1-31. doi:10.1080/00218464.2023.2223475

Wu S, Freund J, Delp A, et al. Intrinsic forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg. In: ; 2023.

Akbulut Irmak EF, Hanses H, Horwath I, Tröster T. Case Study III: Challenges of lightweight design, vehicles, and rescuers. In: Climate Protection, Resource Efficiency, and Sustainable Engineering. transcript Verlag; 2023. doi:10.14361/9783839463772-006

Schöppner V, Gevers K, Schraa L, et al. Evaluation of the effects of different heating strategies on the joining partners during infrared welding of black polyamides. In: ; 2023.

Schöppner V, Gevers K, Schraa L, et al. Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation. Proceedings of the 2023 International Conference on Composite Materials. Published online 2023.

Schöppner V, Arndt T. Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten. Joining Plastics. 2023;(17):20-27.

Schöppner V, Petzke J. Dielectric Heating in the Vulcanization Process of Rubber Extrudates. In: ; 2023.

Moritzer E, Held C. Direktverschraubung additiv gefertigter Kunststoffbauteile. In: DVS Media GmbH, ed. ; 2023.

Schöppner V, Gevers K, Hoenen N, et al. Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka Homogenization Method. Advanced Structured Materials. Published online 2023.

Schöppner V, Austermeier L, Trienens D. Verbesserung der Betriebspunktauslegung durch Schneckensimulation. Wissenschaftlicher Arbeitskreis Kunststofftechnik. Published online 2023:62-66.

Moritzer E, Scholle M. The main factors influencing glass fiber shortening in the processing of bulk molding compounds (BMC). In: ; 2023.

Köllermeier J, Schöppner V. Optimizing the Processing Performance of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental Data. In: ; 2023.

Vogtschmidt S, Schöppner V. Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten. Joining Plastics. Published online 2023.

Schöppner V, Frank M, Schall CWT. The Wave Must Be Right. Plastic Insights. 2023;(7/2023):52-54.

Moritzer E, Held C. Vorspannkraftrelaxation bei der Direktverschraubung additiv gefertigter Kunststoffbauteile. In: ; 2023.

Triebus M. Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff.; 2023. doi:10.17619/UNIPB/1-1719

Lückenkötter J, Aydin S, Marten T, Tröster T. Analysis and Optimization of Joint Formation in Hybrid Compression Molding. In: ; 2023.

Gevers K, Töws P, Schraa L, et al. Einfluss von Infrarotschweißprozessparametern auf die quasistatische und zyklische Belastbarkeit von technischen glasfaserverstärkten Thermoplasten. In: 11. Landshuter Leichtbau-Colloquium. 1st ed. Landshut: LC-Verlag; 2023:8-17.

Schöppner V, Austermeier L, Nordieker A. A NEW APPROACH FOR THE LOCAL DETERMINATION OF ENERGY INPUT IN CO-ROTATING TWIN SCREW EXTRUDERS BASED ON SCREW TORSION. In: ; 2023.

Schöppner V, Austermeier L, Alsoud A. Development Of An Asymmetric Torque Model For The Two Screws Of A Twin Screw Extruder. In: ; 2023.

Schöppner V, Gevers K, Schraa L, et al. Auswirkungen unterschiedlicher Erwärmstrategien auf infraroterwärmte Polyphthalamide. Joining Plastics. Published online 2023.

Schöppner V, Petzke J. Devulkanisation schwefelvernetzender Elastomere im halbleitergestützten Mikrowellenverfahren. In: ; 2023.

Westermann H, Mahnken R. Numerical investigations of new loworder explicit last stage diagonal implicit Runge–Kutta schemes with the finiteelement method. PAMM. 2023;23(2). doi:10.1002/pamm.202300071

Westermann H, Mahnken R. On the accuracy, stability and computational efficiency of explicit last-stage diagonally implicit Runge–Kutta methods (ELDIRK) for the adaptive solution of phase-field problems. Computer Methods in Applied Mechanics and Engineering. 2023;418. doi:10.1016/j.cma.2023.116545

Lenz P, Kreutzheide P, Mahnken R. Multiphase elasto-plastic mean-field homogenisation and its consistent linearisation. Computers &;amp; Structures. 2023;290. doi:10.1016/j.compstruc.2023.107160

Moritzer E, Elsner CL, Deupmann K. Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles. In: ; 2023.

Schöppner V, Trienens D. Investigation of the influence of screw geometry on the resulting melt quality for cast film extrusion. In: ; 2023.

Moritzer E, Mühlhoff FM, Rauen D, Kolbe B, Schlee H, Hokamp C. Großflächig, komplex? InMould-Plasma ist die Lösung! Kunststoffe. Published online 2023.

Moritzer E, Kartelmeyer S, Kreamer D, Jaroschek C. Goodbye Hot Spots - with No Extra Energy Expenditure. Plastics Insights. 2023;(7/2023):38-41.

Schöppner V, Frank M, Schall CWT. Hauptsache, die Wellenlänge stimmt. Kunststoffe. 2023;(9/2023):76-78.

Moritzer E, Kartelmeyer S, Kraemer D, Jaroschek C. Hotspots ade - ohne Extra-Energieaufwand. Kunststoffe. 2023;(5/2023):64-66.

Moritzer E, Held C. Optimization of additively manufactured parts for direct screwing. In: Springer Verlag; 2023.

Schöppner V, Kleinschmidt D, Hopmann C, et al. Optimisation of the Simulation of Rubber Extrusion dies by means of the Integration of empirically determined characteristic Maps. KGK Kautschuk Gummi Kunststoffe. Published online 2023:47-52.

Schöppner V, Gevers K, Albrecht M, Seefried A. Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen. In: ; 2023.

Petzke J, Kleinschmidt D, Schöppner V. Microwave Heating of Rubber Extrudates. In: ; 2023.

Moritzer E, Kartelmeyer S, Kringe R, Jaroschek C. Konturnah kühlen für wenig Geld. Kunststoffe. 2023;(8/2023):56-59.

Schöppner V, Trienens D. Investigation regarding the correlation of the relative influences during the extrusion process of cast films on the residual melt quality. In: ; 2023. doi:10.22032/dbt.58867

Schöppner V, Altepeter M, Schall CWT, Wanke S, Kley M. Material-Preserving Extrusion of Polyamide on a Twin-Screw Extruder. Polymers. Published online 2023:10.

Brüning F. Modellierung der Feststoffförderung im Einzug von Nutbuchsenextrudern mit Hilfe von DEM-Simulationen. Vol Band 1/2023. Shaker Verlag; 2023.

Hartung M. Untersuchung Der UVC-Bestrahlung Als Oberflächenvorbehandlungsmethode von Polycarbonaten Zur Erzeugung Einer Verbundhaftung Zu Flüssigsilikonkautschuken .; 2023.

Stüker D, Schöppner V. An approach for the numerical calculation of the non-isothermal pressure-throughput-characteristics of single screw melt-extruder. In: INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing; 2023. doi:10.1063/5.0138944

Malatyali H, Schöppner V, Hoemann T. Investigation of the influence of process and screw configurations on fiber length for recycled carbon fiber. In: INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing; 2023. doi:10.1063/5.0139631

Malatyali H, Schöppner V. Investigation of shear rates in twin-screw extruder using CFD-simulation. In: INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing; 2023. doi:10.1063/5.0139630

Bürenhaus FI, Moritzer E. Influence of fiber geometry and sizing on glass fiber breakage. In: INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing; 2023. doi:10.1063/5.0135843

Tchomgue Simeu A, Mahnken R. Downwind and upwind approximations for mesh and model adaptivity of elastoplastic composites. PAMM. Published online 2023. doi:10.1002/pamm.202300136

Stallmeister T. Verfahrensentwicklung Zur Einstufigen Herstellung von Biegebelastbaren Hybridstrukturen Im Fließpressprozess.; 2023. doi:10.17619/UNIPB/1-1670

Knorr L, Jungeilges A, Pfeifer F, Burmeister SC, Meschede H. Regenerative Energien für einen effizienten Betrieb von Presshärtelinien. 4. Aachener Ofenbau- und Thermoprozess-Kolloquium; 2023.

Jungeilges A. Possibilities of Sustainable Heating Methods for Press Hardening Processes. Car Body Parts - Automotive Circle Conference; 2023.

Kaiser MA, Reitz A, Konrad S, Meyer T, Marten T, Tröster T. Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess. In: Merklein M, ed. Workshop Warmblechumformung. Vol 18. Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 18. Erlanger Workshop Warmblechumformung. Lehrstuhl für Fertigungstechnologie; 2023:99-118.

Duderija B, González-Orive A, Ebbert C, Neßlinger V, Keller A, Grundmeier G. Electrode Potential-Dependent Studies of Protein Adsorption on Ti6Al4V Alloy. Molecules. 2023;28(13). doi:10.3390/molecules28135109

Duderija B, Sahin F, Meinderink D, et al. Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation. Journal of Advanced Joining Processes. 2023;9. doi:10.1016/j.jajp.2023.100181

Moritzer E, Hecker F. Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia. 2023;411(1). doi:10.1002/masy.202200181

Moritzer E, Hecker F, Knaup F, Wächter J. Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process. In: Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37). AIP Publishing; 2023:170001-1-170001-170005. doi:10.1063/5.0168548

Börger A, Mahnken R. A micropolar model accounting for asymmetric behavior of coldbox sand in relation to tensile and compression tests. PAMM. Published online 2023. doi:10.1002/pamm.202300126

Penner E. Polymorphic Uncertainty in Constitutive Modeling of Polymer Composites at Different Scales. Shaker Verlag; 2023. doi:10.2370/9783844093322

Stüker D, Schöppner V. Simplified numerical calculation of the isothermal, three-dimensional, Non-Newtonian flow characteristics of single-screw melt-extruder. In: INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing; 2023. doi:10.1063/5.0138943

Schöppner V, Brüning F. Calibration of a Contact Model for DEM Simulations of Grooved Feed  Sections of Single Screw Extruders. In: 36th International Conference of the Polymer Processing Society  (PPS-36). ; 2023. doi:10.1063/5.0135858

Vogtschmidt S, Schöppner V. The short-and long-term properties of welded high-temperature-resistant thermoplastics. In: ; 2023. doi:10.1007/s40194-023-01595-3

Moritzer E, Hecker F. Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia. 2023;411(1). doi:10.1002/masy.202200181

Altepeter M, Wanke S, Schöppner V. Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder. In: INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing; 2023. doi:10.1063/5.0135824

Moritzer E, Tölle L, Greb C, Haag M. Conceptions and Feasibility Study of Fiber Orientation in the Melt as Part of a Completely Circular Recycling Concept for Fiber-Reinforced Thermoplastics. Journal of Composites Science. 2023;(7):267. doi:10.3390/jcs7070267

Schöppner V, Altepeter M, Austermeier L, Wanke S, Meinheit P. Polypropylene Degradation on Co-Rotating Twin-Screw Extruders. Polymers 2023. 2023;(15(9)):2181. doi:10.3390/polym15092181

Schöppner V, Frank M. Investigation of the Homogenization Performance of Various Faceted Mixers and Optimization with Regard to Mixing as well as Pressure Throughput Behavior. In: ; 2023. doi:10.1063/5.0135825

Schall CWT, Schöppner V. Design of a test bench for measuring the degradation behavior of plastics during processing. In: PP. ; 2023.

Schöppner V, Schall CWT. Material Characterization of Polypropylene and Polystyrene Regarding Molecular Degradation Behavior. Materials. 2023;(16(17)):5891. doi:10.3390/ma16175891