Schall, Christoph Wilhelm Theodor. Materialschonende Verarbeitung von Thermoplasten auf Wave-Schnecken. Shaker Verlag, 2024.

Richters, Maximilian. Herstellung und Charakterisierung von Wood-Plastic-Composites (WPC) mit einer Matrix aus thermoplastischen Polyurethanen zur Erzeugung einer Holz-WPC-Verbundstruktur . 2024.

Hamdoun, Ayoub, and Rolf Mahnken. “Experimental Investigations of Uniaxial and Biaxial Cold Stretching within PCfilms and Bars Using Optical Measurements.”10.1002/pamm.202300114__PAMM, Wiley, 2024, doi:10.1002/pamm.202300114.

Lenz, Peter, and Rolf Mahnken. “Multiscale Simulation of Polymer Curing of Composites Combined Mean-Field Homogenisation Methods at Large Strains.”10.1016/j.ijsolstr.2023.112642__International Journal of Solids and Structures, vol. 290, 112642, Elsevier BV, 2024, doi:10.1016/j.ijsolstr.2023.112642.

Flachmann, Felix. Untersuchung des Füllverhaltens holzfaserverstärkter Kunststoffe (WPC) mit hohen Füllstoffgehalten. Shaker Verlag, 2024.

Frank, Maximilian. Simulationsgestützte Bestimmung und Optimierung der Mischgüte in der Einschneckenextrusion. Shaker Verlag, 2024.

Mahnken, Rolf, and Hendrik Westermann. “Construction of A-Stable Explicit Last-Stage Diagonal Implicit Runge–Kutta (ELDIRK) Methods.”10.1007/s00466-024-02442-y__Computational Mechanics, Springer Science and Business Media LLC, 2024, doi:10.1007/s00466-024-02442-y.

Milaege, Dennis, et al. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.”10.3390/cryst14020117__Crystals, vol. 14, no. 2, 117, MDPI AG, 2024, doi:10.3390/cryst14020117.

Richters, Maximilian. Herstellung Und Charakterisierung von Wood-Plastic-Composites (WPC) Mit Einer Matrix Aus Thermoplastischen Polyurethanen Zur Erzeugung Einer Holz-WPC-Verbundstruktur . 2024, doi:978-3-8440-9390-2.

Hirsch, Andre. Ein Beitrag Zur Erarbeitung von Fertigungsrichtlinien Für Das Kunststoff Freiformen . 2024, doi:978-3-8440-9409-1.

Schall, Christoph Wilhelm Theodor. Materialschonende Verarbeitung von Thermoplasten Auf Wave-Schnecken. 2024, doi:978-3-8440-9354-4.

Schadomsky, Michael. Experimentelle Und Simulative Analyse Der Mischwirkung in Einschneckenextrudern. 2024, doi:978-3-8440-9334-6.

Moritzer, Elmar, and Christian Lennart Elsner. Evaluation of the Influence of Particle Type, Shape and Size on the Thermal Conductivity of Filled Polymers in the Fused Filament Fabrication Process. 2024.

Hamdoun, Ayoub, and Rolf Mahnken. “A Large Deformation Gradient Theory for Glassy Polymers by Means of Micromorphic Regularization.”10.1007/s00419-024-02570-0__Archive of Applied Mechanics, vol. 94, no. 5, Springer Science and Business Media LLC, 2024, pp. 1221–42, doi:10.1007/s00419-024-02570-0.

Hamdoun, Ayoub, and Rolf Mahnken. “Uniaxial and Biaxial Experimental Investigation of Glassy Polymers.”10.1016/j.polymer.2024.126981__Polymer, vol. 299, 126981, Elsevier BV, 2024, doi:10.1016/j.polymer.2024.126981.

Kröker, Michael. Experimentelle Und Modellbasierte Untersuchungen Zum Prozessverhalten von Teilkristallinen Materialien Im Spritzgießsonderverfahren GITBlow. 2023.

Penner, Eduard, et al. “Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations.”10.1007/s12221-023-00122-x__Fibers and Polymers, Springer Science and Business Media LLC, 2023, doi:10.1007/s12221-023-00122-x.

Lenz, Peter, and Rolf Mahnken. “Non-Local Integral-Type Damage Combined to Mean-Field Homogenization Methods for Composites and Its Parallel Implementation.”10.1016/j.compstruct.2023.116911__Composite Structures, 116911, Elsevier BV, 2023, doi:10.1016/j.compstruct.2023.116911.

Ostermann, Moritz, et al. “Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures.”10.3390/en16083371__Energies, vol. 16, no. 8, 3371, MDPI AG, 2023, doi:10.3390/en16083371.

Voswinkel, Dietrich. “Application of a New Strategy for Time-Efficient Laser Treatment of Galvanized Steel Substrates to Improve the Adhesion Properties.”/10.1016/j.jmapro.2023.03.056__Journal of Manufacturing Processes, vol. 94, Elsevier, 2023, pp. 10–19, doi:/10.1016/j.jmapro.2023.03.056.

Grydin, Olexandr, et al. “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips.”10.1007/978-3-031-22532-1_137__Light Metals 2023, edited by Stephan Broek, Springer Nature Switzerland, 2023, pp. 1031–37, doi:10.1007/978-3-031-22532-1_137.

Moritzer, Elmar, and Felix Flachmann. “Morphological and Mechanical Properties of Foamed Thick-Walled Wood-Plastic-Composite Structures.”10.1177/0021955x231161175__Journal of Cellular Plastics, vol. 59, no. 3, SAGE Publications, 2023, pp. 187–99, doi:10.1177/0021955x231161175.

Lückenkötter, Julian, et al. “Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector.”10.21741/9781644902479-27__Materials Research Proceedings, vol. 28, Materials Research Forum LLC, 2023, pp. 249–58, doi:10.21741/9781644902479-27.

Lenz, Peter, and Rolf Mahnken. “Thermochemomechanical Modelling of a Curing Process Combined with Meanfield Homogenization Methods at Large Strains.”10.1002/pamm.202200214__PAMM, vol. 22, no. 1, Wiley, 2023, doi:10.1002/pamm.202200214.

Cheng, Chun, et al. A Non-Linear Mean-Field Debonding Model at Large Strains for the Analysis of Fibre Kinking in Ud Composites. Elsevier BV, 2023.

Westermann, Hendrik, and Rolf Mahnken. “A Thermodynamic Framework for the Phasefield Approach Considering Carbide Precipitation during Phase Transformations.”10.1002/pamm.202200080__PAMM, vol. 22, no. 1, Wiley, 2023, doi:10.1002/pamm.202200080.

Hamdoun, Ayoub, and Rolf Mahnken. “A Finite Strain Gradient Theory for Viscoplasticity by Means of Micromorphic Regularization.”10.1002/pamm.202200074__PAMM, vol. 22, no. 1, Wiley, 2023, doi:10.1002/pamm.202200074.

Ostermann, Moritz, et al. “Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility.”10.1007/978-3-658-39438-7_25__Towards the New Normal in Mobility, edited by Heike Proff, Springer Fachmedien Wiesbaden, 2023, doi:10.1007/978-3-658-39438-7_25.

Tchomgue Simeu, Arnold, and Rolf Mahnken. “Goaloriented Adaptivity Based on a Model Hierarchy of Meanfield and Fullfield Homogenization Methods in Elastoplasticity.”10.1002/pamm.202200053__PAMM, vol. 22, no. 1, Wiley, 2023, doi:10.1002/pamm.202200053.

Gnaase, Stefan, et al. “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709.”10.3390/cryst13020157__Crystals, vol. 13, no. 2, 157, MDPI AG, 2023, doi:10.3390/cryst13020157.

Mahnken, Rolf. “Derivation of Third Order Runge–Kutta Methods (ELDIRK) by Embedding of Lower Order Implicit Time Integration Schemes for Local and Global Error Estimation.”10.1007/s00466-023-02347-2__Computational Mechanics, Springer Science and Business Media LLC, 2023, doi:10.1007/s00466-023-02347-2.

Grenz, Julian, et al. “Integrating Prospective LCA in the Development of Automotive Components.”10.3390/su151310041__Sustainability, vol. 15, no. 13, 10041, MDPI AG, 2023, doi:10.3390/su151310041.

Ostermann, Moritz, et al. “NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen.” WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte, 2023.

Tchomgue Simeu, Arnold, and Rolf Mahnken. “Mesh- and Model Adaptivity for Elasto-Plastic Mean-Field and Full-Field Homogenization Based on Downwind  and Upwind Approximations.”10.23967/admos.2023.054__XI International Conference on Adaptive Modeling and Simulation, CIMNE, 2023, doi:10.23967/admos.2023.054.

Wu, Shuang, et al. “Adhesion Properties of the Hybrid System Made of Laser-Structured Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing Process.”10.1080/00218464.2023.2245758__The Journal of Adhesion, Informa UK Limited, 2023, pp. 1–29, doi:10.1080/00218464.2023.2245758.

Freund, Jonathan, et al. “Relationship between Laser-Generated Micro- and Nanostructures and the Long-Term Stability of Bonded Epoxy-Aluminum Joints.”10.1080/00218464.2023.2223475__The Journal of Adhesion, Informa UK Limited, 2023, pp. 1–31, doi:10.1080/00218464.2023.2223475.

Wu, Shuang, et al. Intrinsic Forming of Hybrid Parts Made of Laser-Structured Aluminium Sheet and CFRP-Prepreg. 2023.

Akbulut Irmak, Emine Fulya, et al. “Case Study III: Challenges of Lightweight Design, Vehicles, and Rescuers.”10.14361/9783839463772-006__Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, 2023, doi:10.14361/9783839463772-006.

Schöppner, Volker, et al. Evaluation of the Effects of Different Heating Strategies on the Joining Partners during Infrared Welding of Black Polyamides. 2023.

Schöppner, Volker, et al. “Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation.” Proceedings of the 2023 International Conference on Composite Materials, 2023.

Schöppner, Volker, and Theresa Arndt. “Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten.” Joining Plastics, no. 17, 2023, pp. 20–27.

Schöppner, Volker, and J. Petzke. Dielectric Heating in the Vulcanization Process of Rubber Extrudates. 2023.

Moritzer, Elmar, and Christian Held. Direktverschraubung additiv gefertigter Kunststoffbauteile. Edited by DVS Media GmbH, 2023.

Schöppner, Volker, et al. “Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts Based on Mori-Tanaka Homogenization Method.” Advanced Structured Materials, 2023.

Schöppner, Volker, et al. “Verbesserung der Betriebspunktauslegung durch Schneckensimulation.” Wissenschaftlicher Arbeitskreis Kunststofftechnik, 2023, pp. 62–66.

Moritzer, Elmar, and Maximilian Scholle. The Main Factors Influencing Glass Fiber Shortening in the Processing of Bulk Molding Compounds (BMC). 2023.

Köllermeier, Jonas, and Volker Schöppner. Optimizing the Processing Performance of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental Data. 2023.

Vogtschmidt, Sascha, and Volker Schöppner. “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten.” Joining Plastics, 2023.

Schöppner, Volker, et al. “The Wave Must Be Right.” Plastic Insights, no. 7/2023, 2023, pp. 52–54.

Moritzer, Elmar, and Christian Held. Vorspannkraftrelaxation bei der Direktverschraubung additiv gefertigter Kunststoffbauteile. 2023.

Triebus, Marcel. Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff. 2023, doi:10.17619/UNIPB/1-1719.

Lückenkötter, Julian, et al. Analysis and Optimization of Joint Formation in Hybrid Compression Molding. 2023.

Gevers, Karina, et al. “Einfluss von Infrarotschweißprozessparametern auf die quasistatische und zyklische Belastbarkeit von technischen glasfaserverstärkten Thermoplasten.” 11. Landshuter Leichtbau-Colloquium, 1st ed., Landshut: LC-Verlag, 2023, pp. 8–17.

Schöppner, Volker, et al. A NEW APPROACH FOR THE LOCAL DETERMINATION OF ENERGY INPUT IN CO-ROTATING TWIN SCREW EXTRUDERS BASED ON SCREW TORSION. 2023.

Schöppner, Volker, et al. Development Of An Asymmetric Torque Model For The Two Screws Of A Twin Screw Extruder. 2023.

Schöppner, Volker, et al. “Auswirkungen unterschiedlicher Erwärmstrategien auf infraroterwärmte Polyphthalamide.” Joining Plastics, 2023.

Schöppner, Volker, and J. Petzke. Devulkanisation schwefelvernetzender Elastomere im halbleitergestützten Mikrowellenverfahren. 2023.

Westermann, Hendrik, and Rolf Mahnken. “Numerical Investigations of New Loworder Explicit Last Stage Diagonal Implicit Runge–Kutta Schemes with the Finiteelement Method.”10.1002/pamm.202300071__PAMM, vol. 23, no. 2, Wiley, 2023, doi:10.1002/pamm.202300071.

Westermann, Hendrik, and Rolf Mahnken. “On the Accuracy, Stability and Computational Efficiency of Explicit Last-Stage Diagonally Implicit Runge–Kutta Methods (ELDIRK) for the Adaptive Solution of Phase-Field Problems.”10.1016/j.cma.2023.116545__Computer Methods in Applied Mechanics and Engineering, vol. 418, 116545, Elsevier BV, 2023, doi:10.1016/j.cma.2023.116545.

Lenz, Peter, et al. “Multiphase Elasto-Plastic Mean-Field Homogenisation and Its Consistent Linearisation.”10.1016/j.compstruc.2023.107160__Computers &;amp; Structures, vol. 290, 107160, Elsevier BV, 2023, doi:10.1016/j.compstruc.2023.107160.

Moritzer, Elmar, et al. Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles. 2023.

Schöppner, Volker, and Dorte Trienens. Investigation of the Influence of Screw Geometry on the Resulting Melt Quality for Cast Film Extrusion. 2023.

Moritzer, Elmar, et al. “Großflächig, komplex? InMould-Plasma ist die Lösung!” Kunststoffe, 2023.

Moritzer, Elmar, et al. “Goodbye Hot Spots - with No Extra Energy Expenditure.” Plastics Insights, no. 7/2023, 2023, pp. 38–41.

Schöppner, Volker, et al. “Hauptsache, die Wellenlänge stimmt.” Kunststoffe, no. 9/2023, 2023, pp. 76–78.

Moritzer, Elmar, et al. “Hotspots ade - ohne Extra-Energieaufwand.” Kunststoffe, no. 5/2023, 2023, pp. 64–66.

Moritzer, Elmar, and Christian Held. Optimization of Additively Manufactured Parts for Direct Screwing. Springer Verlag, 2023.

Schöppner, Volker, et al. “Optimisation of the Simulation of Rubber Extrusion Dies by Means of the Integration of Empirically Determined Characteristic Maps.” KGK Kautschuk Gummi Kunststoffe, 2023, pp. 47–52.

Schöppner, Volker, et al. Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen. 2023.

Petzke, J., et al. Microwave Heating of Rubber Extrudates. 2023.

Moritzer, Elmar, et al. “Konturnah kühlen für wenig Geld.” Kunststoffe, no. 8/2023, 2023, pp. 56–59.

Schöppner, Volker, and Dorte Trienens. Investigation Regarding the Correlation of the Relative Influences during the Extrusion Process of Cast Films on the Residual Melt Quality. 2023, doi:10.22032/dbt.58867.

Schöppner, Volker, et al. “Material-Preserving Extrusion of Polyamide on a Twin-Screw Extruder.” Polymers, 2023, p. 10.

Brüning, Florian. Modellierung der Feststoffförderung im Einzug von Nutbuchsenextrudern mit Hilfe von DEM-Simulationen. Shaker Verlag, 2023.

Hartung, Michael. Untersuchung Der UVC-Bestrahlung Als Oberflächenvorbehandlungsmethode von Polycarbonaten Zur Erzeugung Einer Verbundhaftung Zu Flüssigsilikonkautschuken . 2023.

Stüker, Daniel, and Volker Schöppner. “An Approach for the Numerical Calculation of the Non-Isothermal Pressure-Throughput-Characteristics of Single Screw Melt-Extruder.”10.1063/5.0138944__INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022, AIP Publishing, 2023, doi:10.1063/5.0138944.

Malatyali, Hatice, et al. “Investigation of the Influence of Process and Screw Configurations on Fiber Length for Recycled Carbon Fiber.”10.1063/5.0139631__INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022, AIP Publishing, 2023, doi:10.1063/5.0139631.

Malatyali, Hatice, and Volker Schöppner. “Investigation of Shear Rates in Twin-Screw Extruder Using CFD-Simulation.”10.1063/5.0139630__INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022, AIP Publishing, 2023, doi:10.1063/5.0139630.

Bürenhaus, Franziska Isabelle, and Elmar Moritzer. “Influence of Fiber Geometry and Sizing on Glass Fiber Breakage.”10.1063/5.0135843__INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022, AIP Publishing, 2023, doi:10.1063/5.0135843.

Tchomgue Simeu, Arnold, and Rolf Mahnken. “Downwind and Upwind Approximations for Mesh and Model Adaptivity of Elastoplastic Composites.”10.1002/pamm.202300136__PAMM, Wiley, 2023, doi:10.1002/pamm.202300136.

Stallmeister, Tim. Verfahrensentwicklung Zur Einstufigen Herstellung von Biegebelastbaren Hybridstrukturen Im Fließpressprozess. 2023, doi:10.17619/UNIPB/1-1670.

Knorr, Lukas, et al. Regenerative Energien für einen effizienten Betrieb von Presshärtelinien. 4. Aachener Ofenbau- und Thermoprozess-Kolloquium, 2023.

Jungeilges, André. Possibilities of Sustainable Heating Methods for Press Hardening Processes. Car Body Parts - Automotive Circle Conference, 2023.

Kaiser, Maximilian Alexander, et al. “Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess.” Workshop Warmblechumformung, edited by Marion Merklein, vol. 18, Lehrstuhl für Fertigungstechnologie, 2023, pp. 99–118.

Duderija, Belma, et al. “Electrode Potential-Dependent Studies of Protein Adsorption on Ti6Al4V Alloy.”10.3390/molecules28135109__Molecules, vol. 28, no. 13, 5109, MDPI AG, 2023, doi:10.3390/molecules28135109.

Duderija, B., et al. “Electropolymerization of Acrylic Acid on Steel for Enhanced Joining by Plastic Deformation.”10.1016/j.jajp.2023.100181__Journal of Advanced Joining Processes, vol. 9, 100181, Elsevier BV, 2023, doi:10.1016/j.jajp.2023.100181.

Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.”10.1002/masy.202200181__Macromolecular Symposia, vol. 411, no. 1, Wiley, 2023, doi:10.1002/masy.202200181.

Moritzer, Elmar, et al. “Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process.”10.1063/5.0168548__Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), AIP Publishing, 2023, pp. 170001-1-170001–05, doi:10.1063/5.0168548.

Börger, Alexander, and Rolf Mahnken. “A Micropolar Model Accounting for Asymmetric Behavior of Coldbox Sand in Relation to Tensile and Compression Tests.”10.1002/pamm.202300126__PAMM, Wiley, 2023, doi:10.1002/pamm.202300126.

Penner, Eduard. Polymorphic Uncertainty in Constitutive Modeling of Polymer Composites at Different Scales. Shaker Verlag, 2023, doi:10.2370/9783844093322.

Stüker, Daniel, and Volker Schöppner. “Simplified Numerical Calculation of the Isothermal, Three-Dimensional, Non-Newtonian Flow Characteristics of Single-Screw Melt-Extruder.”10.1063/5.0138943__INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022, AIP Publishing, 2023, doi:10.1063/5.0138943.

Schöppner, Volker, and Florian Brüning. “Calibration of a Contact Model for DEM Simulations of Grooved Feed  Sections of Single Screw Extruders.”10.1063/5.0135858__36th International Conference of the Polymer Processing Society  (PPS-36), 2023, doi:10.1063/5.0135858.

Vogtschmidt, Sascha, and Volker Schöppner. The Short-and Long-Term Properties of Welded High-Temperature-Resistant Thermoplastics. 2023, doi:10.1007/s40194-023-01595-3.

Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.”10.1002/masy.202200181__Macromolecular Symposia, vol. 411, no. 1, Wiley, 2023, doi:10.1002/masy.202200181.

Altepeter, Matthias, et al. “Analysis and Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder.”10.1063/5.0135824__INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022, AIP Publishing, 2023, doi:10.1063/5.0135824.

Moritzer, Elmar, et al. “Conceptions and Feasibility Study of Fiber Orientation in the Melt as Part of a Completely Circular Recycling Concept for Fiber-Reinforced Thermoplastics.”10.3390/jcs7070267__Journal of Composites Science, no. 7, 2023, p. 267, doi:10.3390/jcs7070267.

Schöppner, Volker, et al. “Polypropylene Degradation on Co-Rotating Twin-Screw Extruders.”10.3390/polym15092181__Polymers 2023, no. 15(9), 2023, p. 2181, doi:10.3390/polym15092181.

Schöppner, Volker, and Maximilian Frank. Investigation of the Homogenization Performance of Various Faceted Mixers and Optimization with Regard to Mixing as Well as Pressure Throughput Behavior. 2023, doi:10.1063/5.0135825.

Schall, Christoph Wilhelm Theodor, and Volker Schöppner. “Design of a Test Bench for Measuring the Degradation Behavior of Plastics during Processing.” PP, 2023.

Schöppner, Volker, and Christoph Wilhelm Theodor Schall. “Material Characterization of Polypropylene and Polystyrene Regarding Molecular Degradation Behavior.”10.3390/ma16175891__Materials, no. 16(17), 2023, p. 5891, doi:10.3390/ma16175891.