C. W. T. Schall, Materialschonende Verarbeitung von Thermoplasten auf Wave-Schnecken, vol. Band 2/2024. Düren: Shaker Verlag, 2024.

M. Richters, Herstellung und Charakterisierung von Wood-Plastic-Composites (WPC) mit einer Matrix aus thermoplastischen Polyurethanen zur Erzeugung einer Holz-WPC-Verbundstruktur . 2024.

F. Flachmann, Untersuchung des Füllverhaltens holzfaserverstärkter Kunststoffe (WPC) mit hohen Füllstoffgehalten, vol. Band 4. Düren: Shaker Verlag, 2024.

M. Frank, Simulationsgestützte Bestimmung und Optimierung der Mischgüte in der Einschneckenextrusion, vol. 2024,5. Shaker Verlag, 2024.

M. Richters, Herstellung und Charakterisierung von Wood-Plastic-Composites (WPC) mit einer Matrix aus thermoplastischen Polyurethanen zur Erzeugung einer Holz-WPC-Verbundstruktur . 2024.

A. Hirsch, Ein Beitrag zur Erarbeitung von Fertigungsrichtlinien für das Kunststoff Freiformen . 2024.

C. W. T. Schall, Materialschonende Verarbeitung von Thermoplasten auf Wave-Schnecken. 2024.

M. Schadomsky, Experimentelle und simulative Analyse der Mischwirkung in Einschneckenextrudern. 2024.

E. Moritzer and C. L. Elsner, “Evaluation of the Influence of Particle Type, Shape and Size on the Thermal Conductivity of Filled Polymers in the Fused Filament Fabrication Process,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2024), St. Louis, 2024.

M. Kröker, Experimentelle und modellbasierte Untersuchungen zum Prozessverhalten von teilkristallinen Materialien im Spritzgießsonderverfahren GITBlow. 2023.

E. Moritzer and F. Flachmann, “Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures,”10.1177/0021955x231161175__Journal of Cellular Plastics, vol. 59, no. 3, pp. 187–199, 2023, doi:10.1177/0021955x231161175 .

V. Schöppner et al., “Evaluation of the effects of different heating strategies on the joining partners during infrared welding of black polyamides,” presented at the 76th Annual Assembly of the International Institute of Welding (IIW), Singapur (Singapur), 2023.

V. Schöppner et al., “Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation,” Proceedings of the 2023 International Conference on Composite Materials, 2023.

V. Schöppner and T. Arndt, “Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten,” Joining Plastics, no. 17, pp. 20–27, 2023.

V. Schöppner and J. Petzke, “Dielectric Heating in the Vulcanization Process of Rubber Extrudates,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Denver, CO (USA), 2023.

E. Moritzer and C. Held, “Direktverschraubung additiv gefertigter Kunststoffbauteile,” Essen (Deutschland), 2023.

V. Schöppner et al., “Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka Homogenization Method,” Advanced Structured Materials, 2023.

V. Schöppner, L. Austermeier, and D. Trienens, “Verbesserung der Betriebspunktauslegung durch Schneckensimulation,” Wissenschaftlicher Arbeitskreis Kunststofftechnik, pp. 62–66, 2023.

E. Moritzer and M. Scholle, “The main factors influencing glass fiber shortening in the processing of bulk molding compounds (BMC),” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.

J. Köllermeier and V. Schöppner, “Optimizing the Processing Performance of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental Data,” presented at the 60th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2023.

S. Vogtschmidt and V. Schöppner, “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten,” Joining Plastics, 2023.

V. Schöppner, M. Frank, and C. W. T. Schall, “The Wave Must Be Right,” Plastic Insights, no. 7/2023, pp. 52–54, 2023.

E. Moritzer and C. Held, “Vorspannkraftrelaxation bei der Direktverschraubung additiv gefertigter Kunststoffbauteile,” presented at the 28. Technomer, Chemnitz (Deutschland), 2023.

K. Gevers et al., “Einfluss von Infrarotschweißprozessparametern auf die quasistatische und zyklische Belastbarkeit von technischen glasfaserverstärkten Thermoplasten,” in 11. Landshuter Leichtbau-Colloquium, 1st ed., Landshut: LC-Verlag, 2023, pp. 8–17.

V. Schöppner, L. Austermeier, and A. Nordieker, “A NEW APPROACH FOR THE LOCAL DETERMINATION OF ENERGY INPUT IN CO-ROTATING TWIN SCREW EXTRUDERS BASED ON SCREW TORSION,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Denver, CO (USA), 2023.

V. Schöppner, L. Austermeier, and A. Alsoud, “Development Of An Asymmetric Torque Model For The Two Screws Of A Twin Screw Extruder,” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.

V. Schöppner et al., “Auswirkungen unterschiedlicher Erwärmstrategien auf infraroterwärmte Polyphthalamide,” Joining Plastics, 2023.

V. Schöppner and J. Petzke, “Devulkanisation schwefelvernetzender Elastomere im halbleitergestützten Mikrowellenverfahren,” presented at the AZuR-Kolloquium ALTREIFEN-RECYCLING, Gummersbach (Deutschland), 2023.

E. Moritzer, C. L. Elsner, and K. Deupmann, “Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles,” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.

V. Schöppner and D. Trienens, “Investigation of the influence of screw geometry on the resulting melt quality for cast film extrusion,” presented at the 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz), 2023.

E. Moritzer, F. M. Mühlhoff, D. Rauen, B. Kolbe, H. Schlee, and C. Hokamp, “Großflächig, komplex? InMould-Plasma ist die Lösung!,” Kunststoffe, 2023.

E. Moritzer, S. Kartelmeyer, D. Kreamer, and C. Jaroschek, “Goodbye Hot Spots - with No Extra Energy Expenditure,” Plastics Insights, no. 7/2023, pp. 38–41, 2023.

V. Schöppner, M. Frank, and C. W. T. Schall, “Hauptsache, die Wellenlänge stimmt,” Kunststoffe, no. 9/2023, pp. 76–78, 2023.

E. Moritzer, S. Kartelmeyer, D. Kraemer, and C. Jaroschek, “Hotspots ade - ohne Extra-Energieaufwand,” Kunststoffe, no. 5/2023, pp. 64–66, 2023.

E. Moritzer and C. Held, “Optimization of additively manufactured parts for direct screwing,” presented at the 76th Annual Assembly and International Conference of the international Institute of Welding (IIW), Singapur (Singapur), 2023.

V. Schöppner et al., “Optimisation of the Simulation of Rubber Extrusion dies by means of the Integration of empirically determined characteristic Maps,” KGK Kautschuk Gummi Kunststoffe, pp. 47–52, 2023.

V. Schöppner, K. Gevers, M. Albrecht, and A. Seefried, “Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen,” presented at the 28. Technomer, Chemnitz (Deutschland), 2023.

J. Petzke, D. Kleinschmidt, and V. Schöppner, “Microwave Heating of Rubber Extrudates,” presented at the 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz), 2023.

E. Moritzer, S. Kartelmeyer, R. Kringe, and C. Jaroschek, “Konturnah kühlen für wenig Geld,” Kunststoffe, no. 8/2023, pp. 56–59, 2023.

V. Schöppner and D. Trienens, “Investigation regarding the correlation of the relative influences during the extrusion process of cast films on the residual melt quality,”10.22032/dbt.58867__presented at the 60th Ilmenau Scientific Colloquium, Ilmenau, 2023, doi:10.22032/dbt.58867 .

V. Schöppner, M. Altepeter, C. W. T. Schall, S. Wanke, and M. Kley, “Material-Preserving Extrusion of Polyamide on a Twin-Screw Extruder,” Polymers, p. 10, 2023.

F. Brüning, Modellierung der Feststoffförderung im Einzug von Nutbuchsenextrudern mit Hilfe von DEM-Simulationen, vol. Band 1/2023. Düren: Shaker Verlag, 2023.

M. Hartung, Untersuchung der UVC-Bestrahlung als Oberflächenvorbehandlungsmethode von Polycarbonaten zur Erzeugung einer Verbundhaftung zu Flüssigsilikonkautschuken . 2023.

D. Stüker and V. Schöppner, “An approach for the numerical calculation of the non-isothermal pressure-throughput-characteristics of single screw melt-extruder,”10.1063/5.0138944__2023, doi:10.1063/5.0138944 .

H. Malatyali, V. Schöppner, and T. Hoemann, “Investigation of the influence of process and screw configurations on fiber length for recycled carbon fiber,”10.1063/5.0139631__2023, doi:10.1063/5.0139631 .

H. Malatyali and V. Schöppner, “Investigation of shear rates in twin-screw extruder using CFD-simulation,”10.1063/5.0139630__2023, doi:10.1063/5.0139630 .

F. I. Bürenhaus and E. Moritzer, “Influence of fiber geometry and sizing on glass fiber breakage,”10.1063/5.0135843__2023, doi:10.1063/5.0135843 .

E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,”10.1002/masy.202200181__Macromolecular Symposia, vol. 411, no. 1, 2023, doi:10.1002/masy.202200181 .

E. Moritzer, F. Hecker, F. Knaup, and J. Wächter, “Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process,”10.1063/5.0168548__in Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), Fukuoka (Japan), 2023, pp. 170001-1-170001–5, doi:10.1063/5.0168548 .

D. Stüker and V. Schöppner, “Simplified numerical calculation of the isothermal, three-dimensional, Non-Newtonian flow characteristics of single-screw melt-extruder,”10.1063/5.0138943__presented at the PROCEEDINGS OF THE 36TH CONFERENCE OF THE POLYMER PROCESSING SOCIETY, PP, 2023, doi:10.1063/5.0138943 .