Hücker, Lars. Stickstoff basierte Flammschutzmittel für das Lasersintern: Optimierung und Analyse der Recyclingfähigkeit (Studienarbeit), 2024.
LibreCat: /record/50816

Moritzer, Elmar, and Christian Lennart Elsner. “Evaluation of the Influence of Particle Type, Shape and Size on the Thermal Conductivity of Filled Polymers in the Fused Filament Fabrication Process,” 2024.
LibreCat: /record/53529

Rüther, Moritz Johannes, Sven Helge Klippstein, SathishKumar Ponusamy, Torben Rüther, and Hans-Joachim Schmid. “Flowability of Polymer Powders at Elevated Temperatures for Additive Manufacturing.”https://doi.org/10.1016/j.powtec.2023.118460__Powder Technology 422 (2023).https://doi.org/10.1016/j.powtec.2023.118460 .
LibreCat: /record/43128
DOI: 10.1016/j.powtec.2023.118460

Kruse, Anne. Entwicklung einer Methode zur Integration der Additiven Fertigung in die Serienproduktion am Beispiel des Lasersinterns. Vol. 27. Forschungsberichte des Direct Manufacturing Research Centers , 2023.
LibreCat: /record/44509

Kletetzka, Ivo, Maren Kosanke, Dennis Meinderink, Vanessa Neßlinger, Guido Grundmeier, and Hans-Joachim Schmid. “Influence of the Filler–Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser-Sintered Parts Built with Polyamide–Glass Bead Dry Blends.”https://doi.org/10.1007/s40964-023-00501-z__Progress in Additive Manufacturing, 2023.https://doi.org/10.1007/s40964-023-00501-z .
LibreCat: /record/46815
DOI: 10.1007/s40964-023-00501-z

Kletetzka, Ivo, Maren Kosanke, Dennis Meinderink, Vanessa Neßlinger, Guido Grundmeier, and Hans-Joachim Schmid. “Influence of the Filler Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser Sintered Parts Built with Polyamide Glass Bead Dry Blends.” Research Square Platform LLC, 2023.
LibreCat: /record/43049

Kletetzka, Ivo. “Tensile Testing for Polymer AM - Best Pratice at the DMRC,” 2023.
LibreCat: /record/45783

Klippstein, Sven Helge, Ivo Kletetzka, Ilknur Sural, and Hans-Joachim Schmid. “Influence of a Prolonged Shelf Time on P Laser Sintering Powder and Resulting Part Properties.”https://doi.org/10.1007/s00170-023-11243-1__The International Journal of Advanced Manufacturing Technology , 2023.https://doi.org/10.1007/s00170-023-11243-1 .
LibreCat: /record/43046
DOI: https://doi.org/10.1007/s00170-023-11243-1

Sajadi, Said. Charakterisierung und Bewertung von flammgeschützten P Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess, 2023.
LibreCat: /record/46861

Rüther, Moritz Johannes, Sven Helge Klippstein, and Hans-Joachim Schmid. “Correlation between SLS-Powder Processability and Particle Properties .” In PARTEC International Congress on Particle Technology - Book of Abstracts, 172–76. Düsseldorf: VDI Verlag GmbH, 2023.
LibreCat: /record/47626

Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, Vol. 34. Austin: Laboratory for Freeform Fabrication and University of Texas, 2023.
LibreCat: /record/46764

Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.”https://doi.org/10.1002/masy.202200181__Macromolecular Symposia 411, no. 1 (2023).https://doi.org/10.1002/masy.202200181 .
LibreCat: /record/48277
DOI: 10.1002/masy.202200181

Koers, Thorsten, and Balázs Magyar. “Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, Vol. 34, 2023.
LibreCat: /record/47084

Lammers, Stefan, Thorsten Koers, Balázs Magyar, Detmar Zimmer, and Tobias Lieneke. “Depiction of Support Structures in Technical Drawings.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, Vol. 34, 2023.
LibreCat: /record/48790

Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.”https://doi.org/10.26153/tsw/50931__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50931 .
LibreCat: /record/51218
DOI: https://doi.org/10.26153/tsw/50931

Neitzel, Fabian, Ivo Kletetzka, and Hans-Joachim Schmid. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.”https://doi.org/10.26153/tsw/50926__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50926 .
LibreCat: /record/46862
DOI: https://doi.org/10.26153/tsw/50926

Klippstein, Sven Helge. “Reproducibility in Polymer Laser Sintering,” 2022.
LibreCat: /record/30229

Klippstein, Sven Helge. “Neue Polymerwerkstoffe - Der Schlüssel für die Industrialisierung.” 7. AM Forum Berlin, 2022.
LibreCat: /record/33355

Moritzer, Elmar, and Christian Lennart Elsner. “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts.”https://doi.org/10.1002/masy.202100390__Macromolecular Symposia 404, no. 1 (2022).https://doi.org/10.1002/masy.202100390 .
LibreCat: /record/33859
DOI: https://doi.org/10.1002/masy.202100390

Moritzer, Elmar, and Julian Wächter. “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process.”https://doi.org/10.1002/masy.202100389__Macromolecular Symposia 404, no. 1 (2022).https://doi.org/10.1002/masy.202100389 .
LibreCat: /record/33861
DOI: https://doi.org/10.1002/masy.202100389

Moritzer, Elmar, and Christian Lennart Elsner. “Mit Gestaltungsrichtlinien zum Erfolg.” Kunststoffe, 2022.
LibreCat: /record/33987

Moritzer, Elmar, and Christine Driediger. “Reactive Direct Bonding of Digital Light Process Components.”https://doi.org/10.1002/masy.202100396__Macromolecular Symposia 404, no. 1 (2022).https://doi.org/10.1002/masy.202100396 .
LibreCat: /record/33862
DOI: https://doi.org/10.1002/masy.202100396

Klippstein, Sven Helge, Florian Heiny, Nagaraju Pashikanti, Monika Gessler, and Hans-Joachim Schmid. “Powder Spread Process Monitoring in Polymer Laser Sintering and Its Influences on Part Properties.”https://doi.org/10.1007/s11837-021-05042-w __JOM - The Journal of The Minerals, Metals &; Materials Society (TMS) 74 (2022): 1149–1157.https://doi.org/10.1007/s11837-021-05042-w  .
LibreCat: /record/30228
DOI: https://doi.org/10.1007/s11837-021-05042-w 

Klippstein, Sven Helge, and Hans-Joachim Schmid. “Powder Spread Flaws in Polymer Laser Sintering and Its Influences on Mechanical Performance.” In Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium. Austin, TX, USA, 2022.
LibreCat: /record/33356

Kletetzka, Ivo, and Sven Helge Klippstein. “Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag).” In 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben . Universität Paderborn, 2022.
LibreCat: /record/31871

Hanselle, Felix Paul. Untersuchung Und Modellierung Der  Materialeigenschaften von Glaskugelgefüllten, Im  Lasersinterprozess Verarbeiteten Dry-Blends, 2022.
LibreCat: /record/43011

Kosanke, Maren. Oberflächenmodifikation von Glaskugeln Zur  Verbesserung Der Adhäsion Im  Lasersinterverfahren. Paderborn, 2022.
LibreCat: /record/43010

Henke, Frederic. Potenzialanalyse für die Nutzung additiver  Fertigungsverfahren bei einem  Büromöbelhersteller und Realisierung eines  Beispielbauteils (Studienarbeit). Paderborn, 2022.
LibreCat: /record/43007

Ostermeier, Jakob. Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem P Pulver, 2022.
LibreCat: /record/46858

Sural, Ilknur. Einfluss der Lagerdauer von P- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft. Paderborn, 2022.
LibreCat: /record/43012

Moritzer, Elmar, and Felix Hecker. “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS.”https://doi.org/10.26153/tsw/44657__In Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell, Joseph J. Beaman, Richard H. Crawford, Desiderio Kovar, Carolyn C. Seepersad, and Mehran Tehrani, 2011–18, 2022.https://doi.org/10.26153/tsw/44657 .
LibreCat: /record/33852
DOI: 10.26153/tsw/44657

Kletetzka, Ivo, Roland Gawlikowicz, and Hans-Joachim Schmid. “Effects of Spherical Fillers on the Processability and Mechanical Properties ofhttp://dx.doi.org/10.26153/tsw/44558__and PP-Based LS Dry Blends.”http://dx.doi.org/10.26153/tsw/44558__In Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Vol. 33. Austin: Laboratory for Freeform Fabrication and University of Texas, 2022.http://dx.doi.org/10.26153/tsw/44558 .
LibreCat: /record/30220
DOI: http://dx.doi.org/10.26153/tsw/44558

Kletetzka, Ivo, Sven Helge Klippstein, and Hans-Joachim Schmid. “Shelf Life of Polyamide 12 () Laser Sintering Powder.”http://dx.doi.org/10.26153/tsw/44555__In Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Vol. 33. Austin: Laboratory for Freeform Fabrication and University of Texas, 2022.http://dx.doi.org/10.26153/tsw/44555 .
LibreCat: /record/32874
DOI: http://dx.doi.org/10.26153/tsw/44555

Moritzer, Elmar, and Felix Hecker. “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS.”https://doi.org/10.26153/tsw/44654__In Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell, Joseph J. Beaman, Richard H. Crawford, Desiderio Kovar, Carolyn C. Seepersad, and Mehran Tehrani, 1844–58, 2022.https://doi.org/10.26153/tsw/44654 .
LibreCat: /record/33853
DOI: 10.26153/tsw/44654

Delfs, Patrick. Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile. Vol. 22. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Shaker Verlag GmbH, 2021.
LibreCat: /record/24760

Schumacher, Christian. Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6. Vol. 24. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2021.
LibreCat: /record/24770

Moritzer, Elmar, Felix Hecker, and André Hirsch. “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen.” Kunststoffland NRW report, 2021.
LibreCat: /record/24095

Moritzer, Elmar, and Julian Wächter. “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität.” Plastverarbeiter, no. 04 (2021): 30–32.
LibreCat: /record/24168

Moritzer, Elmar, Felix Hecker, and André Hirsch. “Kleine Tropfen, große Wirkung.” Kunststoffe, 2021.
LibreCat: /record/24556

Moritzer, Elmar, and Felix Hecker. “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen.” Jahresmagazin Kunststofftechnik, 2021.
LibreCat: /record/27366

Künneke, Thomas, and Detmar Zimmer. “Konstruktionsregeln Für Additiv Gefertigte Partikeldämpfer/Design Rules for Additive Manufactured Particle Dampers.”https://doi.org/10.37544/0720-5953-2021-11-12-72__Konstruktion, 2021, 72–78.https://doi.org/10.37544/0720-5953-2021-11-12-72 .
LibreCat: /record/27528
DOI: 10.37544/0720-5953-2021-11-12-72

Menge, Dennis, and Hans-Joachim Schmid. “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with P,” 2021.
LibreCat: /record/23760

Nickchen, Tobias, Stefan Heindorf, and Gregor Engels. “Generating Physically Sound Training Data for Image Recognition of Additively Manufactured Parts.” In Proceedings of the IEEE/CVF Winter Conference on Applications of Computer Vision, 1994–2002, 2021.
LibreCat: /record/20886

Magerkohl, Sebastian, Detmar Zimmer, Lennart Tasche, Mirko Schaper, Stefan Urbanek, and Bernd Ponick. “Funktionsoptimierte AM-Gestaltung Eines E-Rotors.” Antriebstechnik - Zeitschrift Für Konstruktion, Entwicklung Und Anwendung von Antrieben Und Steuerungen  60, no. 6 (2021): 36–43.
LibreCat: /record/22447

Zimmer, Detmar, Thorsten Koers, and Tobias Bührmann. “Zukunftstechnologie Und Moderne Antriebe Kombiniert: AM in Modularen Antriebssystemen.” Newsletter Der Wissenschaftlichen Gesellschaft Für Produktentwicklung 1 (2021): 9–10.
LibreCat: /record/22495

Klippstein, Sven Helge. “Online Monitoring Des Beschichtungsprozesses Im Laser Sintern, Systementwicklung Und Einflussanalyse.” D 07407 Rudolstadt, 2021.
LibreCat: /record/30227

Moritzer, Elmar, Felix Hecker, Christian Lennart Elsner, and André Hirsch. “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming.” In Proceedings of  36th Annual Meeting of Polymer Processing Society (PPS-36). Conference Proceedings, n.d.
LibreCat: /record/25283

Moritzer, Elmar, André Hirsch, and C. Dalmer. Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability. Springer, 2021.https://doi.org/10.1007/978-3-030-54334-1 .
LibreCat: /record/22032
DOI: 10.1007/978-3-030-54334-1

Moritzer, Elmar, Julian Wächter, and Christian Lennart Elsner. “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK.”https://doi.org/10.1002/masy.202000269__Macromolecular Symposia 395, no. 1 (2021).https://doi.org/10.1002/masy.202000269 .
LibreCat: /record/24162
DOI: 10.1002/masy.202000269

Moritzer, Elmar, and Christian Schumacher. “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting.”https://doi.org/10.1002/masy.202000275__Macromolecular Symposia 395, no. 1 (2021).https://doi.org/10.1002/masy.202000275 .
LibreCat: /record/24681
DOI: 10.1002/masy.202000275

Moritzer, Elmar, Christian Lennart Elsner, Julian Wächter, and Frederick Knoop. “Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems.” In 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat: /record/24554

Moritzer, Elmar, Christian Lennart Elsner, and Christian Schumacher. “Investigation of MetalPolymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters.”https://doi.org/10.1002/pc.26285__Polymer Composites 42, no. 11 (2021): 6065–79.https://doi.org/10.1002/pc.26285 .
LibreCat: /record/24555
DOI: 10.1002/pc.26285

Gawlikowicz, Roland. Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für  den Lasersinterprozess (Studienarbeit). Paderborn, 2021.
LibreCat: /record/43005

Moritzer, Elmar, Felix Hecker, Christian Lennart Elsner, and André Hirsch. “Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components.”https://doi.org/10.26153/tsw/17567__In Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), edited by David Bourell, 467–74, 2021.https://doi.org/10.26153/tsw/17567 .
LibreCat: /record/24101
DOI: 10.26153/tsw/17567

Moritzer, Elmar, Felix Hecker, Christine Driediger, and André Hirsch. “Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling.”https://doi.org/10.26153/tsw/17577__In Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), edited by David Bourell, 575–84, 2021.https://doi.org/10.26153/tsw/17577 .
LibreCat: /record/24099
DOI: 10.26153/tsw/17577

Moritzer, Elmar, Felix Hecker, and André Hirsch. “Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming.”https://doi.org/10.26153/tsw/17643__In Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), edited by David Bourell, 1268–75, 2021.https://doi.org/10.26153/tsw/17643 .
LibreCat: /record/24096
DOI: 10.26153/tsw/17643

Kletetzka, Ivo, Christina Kummert, and Hans-Joachim Schmid. “Laser Sintering Design Guidelines for Media Transmitting Components.”http://dx.doi.org/10.26153/tsw/17548__In Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Vol. 32. Austin: Laboratory for Freeform Fabrication and University of Texas, 2021.http://dx.doi.org/10.26153/tsw/17548 .
LibreCat: /record/24160
DOI: http://dx.doi.org/10.26153/tsw/17548

Knoop, Frederick. Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren. Vol. 18. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2020.
LibreCat: /record/24771

Fischer, Matthias. Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte. Vol. 17. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2020.
LibreCat: /record/24773

Menge, Dennis, Sven Helge Klippstein, and Hans-Joachim Schmid. Additive Leichtbaustrukturen für die Flugzeugkabine, 2020.
LibreCat: /record/24943

Moritzer, Elmar, and Julian Wächter. “From Filament Production to Material Qualification for the FDM Process,” 2020.
LibreCat: /record/24478

Lieneke, Tobias, Thomas Künneke, Niclas Eschner, Alexander  Jacob, Martin  Schäfer, Thorsten Hickmann, Rami Faroun, et al. Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren, 2020.
LibreCat: /record/24669

Nickchen, Tobias, Gregor Engels, and Johannes Lohn. “Opportunities of 3D Machine Learning for Manufacturability Analysis and Component Recognition in the Additive Manufacturing Process Chain.”https://doi.org/10.1007/978-3-030-54334-1_4__In Industrializing Additive Manufacturing. Cham, 2020.https://doi.org/10.1007/978-3-030-54334-1_4 .
LibreCat: /record/18789
DOI: 10.1007/978-3-030-54334-1_4

Kummert, Christina, Wolfgang Diekmann, Katrin Tews, and Hans-Joachim Schmid. “Influence of Part Microstructure on Mechanicl Properties of PX Laser Sintered Specimens.”http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, 29:735–44, 2020.http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf .
LibreCat: /record/22182
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf

Rohde, Johannes . Prozessbasierte Technologieintegration der Additiven Fertigung in Unternehmen. Vol. 16. Forschungsbericht des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2019.
LibreCat: /record/24752

Josupeit, Stefan. On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process. Vol. 11. Forschungsberichte Des Direct Manufacturing Research Centers. Düren: Shaker Verlag GmbH, 2019.
LibreCat: /record/24753

Lohn, Johannes. Zum Laserstrahlschmelzen neuer Kunststoffmaterialien. Vol. 15. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Shaker Verlag GmbH, 2019.
LibreCat: /record/24758

Jahnke, Ulrich. Systematik zum präventiven Schutz vor Produktpiraterie durch Additive Fertigungsverfahren. Vol. 13. Forschungsbericht des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2019.
LibreCat: /record/24759

Reiher, Thomas. Intelligente Optimierung von Produktgeometrien für die additive Fertigung. Vol. 12. Forschungsbericht des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2019.
LibreCat: /record/24761

Deppe, Gereon. Entwicklung einer Entscheidungsunterstützung für den Einsatz Additiver Fertigung in der zeitkritischen Ersatzteilversorgung. Vol. 9. Forschungsbericht des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2019.
LibreCat: /record/24762

Menge, Dennis, Rolf Walter, Hans-Joachim Schmid, and Ulf Paul Breuer. FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen. Vol. 1338. FVA-Heft. Frankfurt, 2019.
LibreCat: /record/24628

Klippstein, Sven Helge, and Hans-Joachim Schmid. “Methodik Zur Qualifizierung Des Lasersinter Prozesses Für Die Serienfertigung.”https://doi.org/10.3139/9783446462441.025__In Proceedings of the 16th Rapid.Tech Conference, 2019.https://doi.org/10.3139/9783446462441.025 .
LibreCat: /record/22198
DOI: 10.3139/9783446462441.025

Künneke, Thomas, Tobias Lieneke, Stefan Lammers, and Detmar Zimmer. “Design Guidelines for Post-Processing of Laser Beam Melting in Context of Support Structures.”https://www.euspen.eu/knowledge-base/AM19127.pdf__In Proceedings of the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing, 137–40, 2019.https://www.euspen.eu/knowledge-base/AM19127.pdf .
LibreCat: /record/22442
DOI: https://www.euspen.eu/knowledge-base/AM19127.pdf

Lieneke, Tobias, Thomas Künneke, Fabian Schlenker, Vera Denzer, and Detmar Zimmer. “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances.”https://www.euspen.eu/knowledge-base/AM19129.pdf__In Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.https://www.euspen.eu/knowledge-base/AM19129.pdf .
LibreCat: /record/22443
DOI: https://www.euspen.eu/knowledge-base/AM19129.pdf

Künneke, Thomas, and Detmar Zimmer. “Schall Mittels Pulver Dämpfen.” Konstruktionspraxis 6 (2019): 24–26.
LibreCat: /record/22444

Gräßler, I., and C. Oleff. “Risikoorientierte Analyse Und Handhabung von Anforderungsänderungen.”https://doi.org/ 10.35199/dfx2019.5__In Design for X - Beiträge Zum 30. DfX-Symposium , 30:49–60, 2019.https://doi.org/ 10.35199/dfx2019.5 .
LibreCat: /record/22000
DOI:  10.35199/dfx2019.5

Gräßler, I., C. Oleff, and P. Scholle. “Priorisierung von Anforderungen Für Die Entwicklung Mechatronischer Systeme.”https://doi.org/ 10.17619/UNIPB/1-791__In Fachtagung Mechatronik 2019 Paderborn, S. 1-6, 2019.https://doi.org/ 10.17619/UNIPB/1-791 .
LibreCat: /record/22001
DOI:  10.17619/UNIPB/1-791

Gräßler, I., H. Thiele, C. Oleff, P. Scholle, and V. Schulze. “Priorisierung von Anforderungen Für Die Entwicklung Mechatronischer Systeme.”https://doi.org/10.17619/UNIPB/1-791__In International Conference on Engineering Design (ICE), 1265–74, 2019.https://doi.org/10.17619/UNIPB/1-791 .
LibreCat: /record/22002
DOI: 10.17619/UNIPB/1-791

Moritzer, Elmar, Julian Wächter, and M. Elsner. “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength.”http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf__In 30th Annual International Solid Freeform Fabrication Symposium, 30:856–63, 2019.http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf .
LibreCat: /record/22022
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf

Moritzer, Elmar, André Hirsch, H.P. Heim, C. Cherif, and W. Truemper. “Plastic Droplet Welding: Bond Strength between Plastic Freeforming Structures and Continuous Fiber-Reinforced Thermoplastic Composites.”https://doi.org/10.1007/s40194-019-00714-3__Welding in the World 63 (2019): 867–73.https://doi.org/10.1007/s40194-019-00714-3 .
LibreCat: /record/22047
DOI: 10.1007/s40194-019-00714-3

Moritzer, Elmar, André Hirsch, and Franziska Isabelle Bürenhaus. “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures.”https://doi.org/10.1063/1.5088314__In AIP Conference Proceedings, Vol. 2065. AIP Publishing, 2019.https://doi.org/10.1063/1.5088314 .
LibreCat: /record/22028
DOI: 10.1063/1.5088314

Schöppner, Volker, C. Schumacher, and C. Fels. “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process.”https://doi.org/10.1063/1.5088315__In AIP Conference Proceedings. AIP Publishing, 2019.https://doi.org/10.1063/1.5088315 .
LibreCat: /record/22027
DOI: 10.1063/1.5088315

Moritzer, Elmar, André Hirsch, and S. Paulus. Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung. Springer Vieweg, 2019.https://doi.org/10.1007/978-3-658-27412-2 .
LibreCat: /record/22026
DOI: 10.1007/978-3-658-27412-2

Klippstein, Sven Helge, Anne Duchting, Thomas Reiher, F. Hengsbach, Dennis Menge, and Hans-Joachim Schmid. “Devolopment, Production and Post-Processing of a Topology Optimized Aircraft Bracket .” In 30th Annual International Solid Freeform Fabrication Symposium, 30:1932–45, 2019.
LibreCat: /record/22202

Lammers, Stefan, Johannes Tominski, and Detmar Zimmer. “Guidelines for Post Processing Oriented Design of Additive Manufactured Parts for Use in Topology Optimization.”http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf__In II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 174–85, 2019.http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf .
LibreCat: /record/22441
DOI: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf

Moritzer, Elmar, André Hirsch, and Felix Hecker. “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components.”http://dx.doi.org/10.26153/tsw/17308__In 30th Annual International Solid Freeform Fabrication Symposium, 30:705–14, 2019.http://dx.doi.org/10.26153/tsw/17308 .
LibreCat: /record/22041
DOI: http://dx.doi.org/10.26153/tsw/17308

Menge, Dennis, Patrick Delfs, Marcel Töws, and Hans-Joachim Schmid. “Topology Optimized Heat Transfer Using the Example of an Electronic Housing.” In 29th Annual International Solid Freeform Fabrication Symposium, 29:687–97, 2018.
LibreCat: /record/22183

Kummert, Christina, Stefan Josupeit, and Hans-Joachim Schmid. “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.”https://doi.org/10.1007/s11837-017-2658-2__Journal of Minerals, Metals and Materials Society 70, no. 3 (2018): 425–30.https://doi.org/10.1007/s11837-017-2658-2 .
LibreCat: /record/22196
DOI: 10.1007/s11837-017-2658-2

Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat: /record/22430

Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of Additive Manufactured Components.”https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted__In 14th PERMAS Users’ Conference, Vol. 14, 2018.https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted .
LibreCat: /record/22433
DOI: https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted

Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer. “Method for a Software-Based Design Check of Additively Manufactured Components.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, Vol. 29, 2018.http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf .
LibreCat: /record/22434
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf

Künneke, Thomas, Sonja Bücker, Tobias Lieneke, and Detmar Zimmer. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.”https://doi.org/10.3139/9783446458123.008__In Proceedings of the 15th Rapid.Tech Conference, 128–43. Carl Hanser Verlag GmbH &; Co. KG, 2018.https://doi.org/10.3139/9783446458123.008 .
LibreCat: /record/22435
DOI: 10.3139/9783446458123.008

Jacob, Alexander, Thomas Künneke, Tobias Lieneke, Tobias Baumann, Nicole Stricker, Detmar Zimmer, and Gisela Lanza. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.”https://doi.org/10.3139/104.112005__ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 113, no. 11 (2018): 742–45.https://doi.org/10.3139/104.112005 .
LibreCat: /record/22436
DOI: https://doi.org/10.3139/104.112005

Brückner, Uwe, Thomas Künneke, Magnus Hubert Schadomsky, Malte Strop, and Detmar Zimmer. Elektromechanische Antriebe. Carl Hanser Verlag, 2018.https://doi.org/10.3139/9783446456198.009 .
LibreCat: /record/22506
DOI: 10.3139/9783446456198.009

Büsching, J., C. Lindemann, U. Jahnke, A. Kruse, and R. Koch. “Technology Integration into Existing Companies.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, 29:14–31, 2018.http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf .
LibreCat: /record/21696
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf

Graessler, Iris, Philipp Scholle, Julian Hentze, and Christian Oleff. “SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS.”https://doi.org/10.21278/idc.2018.0298__In Proceedings of the DESIGN 2018 15th International Design Conference, 2018.https://doi.org/10.21278/idc.2018.0298 .
LibreCat: /record/21991
DOI: 10.21278/idc.2018.0298

Gräßler, I., P. Scholle, J. Hentze, and C. Oleff. “Semi-Automatized Assessment of Requirement Interrelations.”https://doi.org/10.21278/idc.2018.0298__In 15th International Design Conference, 15:S. 325-334, 2018.https://doi.org/10.21278/idc.2018.0298 .
LibreCat: /record/21998
DOI: 10.21278/idc.2018.0298

Gräßler, I., C. Oleff, and P. Scholle. “Methode Zur Bewertung von Anforderungsänderungen Additiv Gefertigter Produkte.”https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte__In Design for X - Beiträge Zum 29. DfX-Symposium, 29:333–44, 2018.https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte .
LibreCat: /record/21999
DOI: https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte

Schumacher, C., Volker Schöppner, and S. Gnaase. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.”http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf__In 29th Annual International Solid Freeform Fabrication Symposium, 29:1112–20, 2018.http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf .
LibreCat: /record/22020
DOI: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf

Knoop, F., M. Köhler, Tobias Lieneke, Detmar Zimmer, and Volker Schöppner. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen Einlegern in FDM-Strukturen.” Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe 10 (2018): 83–88.
LibreCat: /record/22034