Hücker, Lars. Stickstoff basierte Flammschutzmittel für das Lasersintern: Optimierung und Analyse der Recyclingfähigkeit (Studienarbeit). 2024.

Moritzer, Elmar, and Christian Lennart Elsner. Evaluation of the Influence of Particle Type, Shape and Size on the Thermal Conductivity of Filled Polymers in the Fused Filament Fabrication Process. 2024.

Rüther, Moritz Johannes, et al. “Flowability of Polymer Powders at Elevated Temperatures for Additive Manufacturing.”10.1016/j.powtec.2023.118460__Powder Technology, vol. 422, 118460, Elsevier BV, 2023, doi:10.1016/j.powtec.2023.118460.

Kruse, Anne. Entwicklung einer Methode zur Integration der Additiven Fertigung in die Serienproduktion am Beispiel des Lasersinterns. 2023.

Kletetzka, Ivo, et al. “Influence of the Filler–Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser-Sintered Parts Built with Polyamide–Glass Bead Dry Blends.”10.1007/s40964-023-00501-z__Progress in Additive Manufacturing, Springer Science and Business Media LLC, 2023, doi:10.1007/s40964-023-00501-z.

Kletetzka, Ivo, et al. Influence of the Filler Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser Sintered Parts Built with Polyamide Glass Bead Dry Blends. Research Square Platform LLC, 2023.

Kletetzka, Ivo. Tensile Testing for Polymer AM - Best Pratice at the DMRC. 2023.

Klippstein, Sven Helge, et al. “Influence of a Prolonged Shelf Time on P Laser Sintering Powder and Resulting Part Properties.”https://doi.org/10.1007/s00170-023-11243-1__The International Journal of Advanced Manufacturing Technology , Springer, 2023, doi:https://doi.org/10.1007/s00170-023-11243-1.

Sajadi, Said. Charakterisierung und Bewertung von flammgeschützten P Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess. 2023.

Rüther, Moritz Johannes, et al. “Correlation between SLS-Powder Processability and Particle Properties .” PARTEC International Congress on Particle Technology - Book of Abstracts, VDI Verlag GmbH, 2023, pp. 172–76.

Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, vol. 34, Laboratory for Freeform Fabrication and University of Texas, 2023.

Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.”10.1002/masy.202200181__Macromolecular Symposia, vol. 411, no. 1, Wiley, 2023, doi:10.1002/masy.202200181.

Koers, Thorsten, and Balázs Magyar. “Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, vol. 34, 2023.

Lammers, Stefan, et al. “Depiction of Support Structures in Technical Drawings.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, vol. 34, 2023.

Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.”https://doi.org/10.26153/tsw/50931__Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, 2023, doi:https://doi.org/10.26153/tsw/50931.

Neitzel, Fabian, et al. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.”https://doi.org/10.26153/tsw/50926__Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, 2023, doi:https://doi.org/10.26153/tsw/50926.

Klippstein, Sven Helge. Reproducibility in Polymer Laser Sintering. 2022.

Klippstein, Sven Helge. Neue Polymerwerkstoffe - Der Schlüssel für die Industrialisierung. 7. AM Forum Berlin, 2022.

Moritzer, Elmar, and Christian Lennart Elsner. “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts.”https://doi.org/10.1002/masy.202100390__Macromolecular Symposia, vol. 404, no. 1, Wiley, 2022, doi:https://doi.org/10.1002/masy.202100390.

Moritzer, Elmar, and Julian Wächter. “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process.”https://doi.org/10.1002/masy.202100389__Macromolecular Symposia, vol. 404, no. 1, Wiley, 2022, doi:https://doi.org/10.1002/masy.202100389.

Moritzer, Elmar, and Christian Lennart Elsner. “Mit Gestaltungsrichtlinien zum Erfolg.” Kunststoffe, vol. 11/2022, 2022.

Moritzer, Elmar, and Christine Driediger. “Reactive Direct Bonding of Digital Light Process Components.”https://doi.org/10.1002/masy.202100396__Macromolecular Symposia, vol. 404, no. 1, Wiley, 2022, doi:https://doi.org/10.1002/masy.202100396.

Klippstein, Sven Helge, et al. “Powder Spread Process Monitoring in Polymer Laser Sintering and Its Influences on Part Properties.”https://doi.org/10.1007/s11837-021-05042-w __JOM - The Journal of The Minerals, Metals &; Materials Society (TMS), vol. 74, Springer, 2022, pp. 1149–1157, doi:https://doi.org/10.1007/s11837-021-05042-w .

Klippstein, Sven Helge, and Hans-Joachim Schmid. “Powder Spread Flaws in Polymer Laser Sintering and Its Influences on Mechanical Performance.” Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, 2022.

Kletetzka, Ivo, and Sven Helge Klippstein. “Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag).” 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben , Universität Paderborn, 2022.

Hanselle, Felix Paul. Untersuchung Und Modellierung Der  Materialeigenschaften von Glaskugelgefüllten, Im  Lasersinterprozess Verarbeiteten Dry-Blends. 2022.

Kosanke, Maren. Oberflächenmodifikation von Glaskugeln Zur  Verbesserung Der Adhäsion Im  Lasersinterverfahren. 2022.

Henke, Frederic. Potenzialanalyse für die Nutzung additiver  Fertigungsverfahren bei einem  Büromöbelhersteller und Realisierung eines  Beispielbauteils (Studienarbeit). 2022.

Ostermeier, Jakob. Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem P Pulver. 2022.

Sural, Ilknur. Einfluss der Lagerdauer von P- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft. 2022.

Moritzer, Elmar, and Felix Hecker. “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS.”10.26153/tsw/44657__Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell et al., 2022, pp. 2011–18, doi:10.26153/tsw/44657.

Kletetzka, Ivo, et al. “Effects of Spherical Fillers on the Processability and Mechanical Properties ofhttp://dx.doi.org/10.26153/tsw/44558__and PP-Based LS Dry Blends.”http://dx.doi.org/10.26153/tsw/44558__Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, vol. 33, Laboratory for Freeform Fabrication and University of Texas, 2022, doi:http://dx.doi.org/10.26153/tsw/44558.

Kletetzka, Ivo, et al. “Shelf Life of Polyamide 12 () Laser Sintering Powder.”http://dx.doi.org/10.26153/tsw/44555__Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, vol. 33, Laboratory for Freeform Fabrication and University of Texas, 2022, doi:http://dx.doi.org/10.26153/tsw/44555.

Moritzer, Elmar, and Felix Hecker. “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS.”10.26153/tsw/44654__Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell et al., 2022, pp. 1844–58, doi:10.26153/tsw/44654.

Delfs, Patrick. Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile. Shaker Verlag GmbH, 2021.

Schumacher, Christian. Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6. Shaker Verlag, 2021.

Moritzer, Elmar, et al. “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen.” Kunststoffland NRW report, vol. 2021, no. 2, 2021, pp. 42–43.

Moritzer, Elmar, and Julian Wächter. “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität.” Plastverarbeiter, no. 04, 2021, pp. 30–32.

Moritzer, Elmar, et al. “Kleine Tropfen, große Wirkung.” Kunststoffe, no. 9/2021, 2021, pp. 88–90.

Moritzer, Elmar, and Felix Hecker. “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen.” Jahresmagazin Kunststofftechnik, 2021, pp. 70–75.

Künneke, Thomas, and Detmar Zimmer. “Konstruktionsregeln Für Additiv Gefertigte Partikeldämpfer/Design Rules for Additive Manufactured Particle Dampers.”10.37544/0720-5953-2021-11-12-72__Konstruktion, 2021, pp. 72–78, doi:10.37544/0720-5953-2021-11-12-72.

Menge, Dennis, and Hans-Joachim Schmid. Low Temperature Laser Sintering on a Standard System: First Attempts and Results with P. 2021.

Nickchen, Tobias, et al. “Generating Physically Sound Training Data for Image Recognition of Additively Manufactured Parts.” Proceedings of the IEEE/CVF Winter Conference on Applications of Computer Vision, 2021, pp. 1994–2002.

Magerkohl, Sebastian, et al. “Funktionsoptimierte AM-Gestaltung Eines E-Rotors.” Antriebstechnik - Zeitschrift Für Konstruktion, Entwicklung Und Anwendung von Antrieben Und Steuerungen , vol. 60, no. 6, Vereinigte Fachverlage GmbH, 2021, pp. 36–43.

Zimmer, Detmar, et al. “Zukunftstechnologie Und Moderne Antriebe Kombiniert: AM in Modularen Antriebssystemen.” Newsletter Der Wissenschaftlichen Gesellschaft Für Produktentwicklung, vol. 1, Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, 2021, pp. 9–10.

Klippstein, Sven Helge. Online Monitoring Des Beschichtungsprozesses Im Laser Sintern, Systementwicklung Und Einflussanalyse. 2021.

Moritzer, Elmar, et al. “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming.” Proceedings of  36th Annual Meeting of Polymer Processing Society (PPS-36).

Moritzer, Elmar, et al. Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability. Springer, 2021, pp. 112–29, doi:10.1007/978-3-030-54334-1.

Moritzer, Elmar, et al. “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK.”10.1002/masy.202000269__Macromolecular Symposia, vol. 395, no. 1, Wiley, 2021, doi:10.1002/masy.202000269.

Moritzer, Elmar, and Christian Schumacher. “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting.”10.1002/masy.202000275__Macromolecular Symposia, vol. 395, no. 1, 2000275, 2021, doi:10.1002/masy.202000275.