Moritzer, Elmar, and Felix Hecker. “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS.”10.26153/tsw/44657__Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell et al., 2022, pp. 2011–18, doi:10.26153/tsw/44657.
LibreCat: /record/33852
DOI: 10.26153/tsw/44657

Kletetzka, Ivo, et al. “Effects of Spherical Fillers on the Processability and Mechanical Properties ofhttp://dx.doi.org/10.26153/tsw/44558__and PP-Based LS Dry Blends.”http://dx.doi.org/10.26153/tsw/44558__Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, vol. 33, Laboratory for Freeform Fabrication and University of Texas, 2022, doi:http://dx.doi.org/10.26153/tsw/44558.
LibreCat: /record/30220
DOI: http://dx.doi.org/10.26153/tsw/44558

Kletetzka, Ivo, et al. “Shelf Life of Polyamide 12 () Laser Sintering Powder.”http://dx.doi.org/10.26153/tsw/44555__Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, vol. 33, Laboratory for Freeform Fabrication and University of Texas, 2022, doi:http://dx.doi.org/10.26153/tsw/44555.
LibreCat: /record/32874
DOI: http://dx.doi.org/10.26153/tsw/44555

Moritzer, Elmar, and Felix Hecker. “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS.”10.26153/tsw/44654__Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell et al., 2022, pp. 1844–58, doi:10.26153/tsw/44654.
LibreCat: /record/33853
DOI: 10.26153/tsw/44654

Delfs, Patrick. Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile. Shaker Verlag GmbH, 2021.
LibreCat: /record/24760

Schumacher, Christian. Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6. Shaker Verlag, 2021.
LibreCat: /record/24770

Moritzer, Elmar, et al. “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen.” Kunststoffland NRW report, vol. 2021, no. 2, 2021, pp. 42–43.
LibreCat: /record/24095

Moritzer, Elmar, and Julian Wächter. “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität.” Plastverarbeiter, no. 04, 2021, pp. 30–32.
LibreCat: /record/24168

Moritzer, Elmar, et al. “Kleine Tropfen, große Wirkung.” Kunststoffe, no. 9/2021, 2021, pp. 88–90.
LibreCat: /record/24556

Moritzer, Elmar, and Felix Hecker. “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen.” Jahresmagazin Kunststofftechnik, 2021, pp. 70–75.
LibreCat: /record/27366

Künneke, Thomas, and Detmar Zimmer. “Konstruktionsregeln Für Additiv Gefertigte Partikeldämpfer/Design Rules for Additive Manufactured Particle Dampers.”10.37544/0720-5953-2021-11-12-72__Konstruktion, 2021, pp. 72–78, doi:10.37544/0720-5953-2021-11-12-72.
LibreCat: /record/27528
DOI: 10.37544/0720-5953-2021-11-12-72

Menge, Dennis, and Hans-Joachim Schmid. Low Temperature Laser Sintering on a Standard System: First Attempts and Results with P. 2021.
LibreCat: /record/23760

Nickchen, Tobias, et al. “Generating Physically Sound Training Data for Image Recognition of Additively Manufactured Parts.” Proceedings of the IEEE/CVF Winter Conference on Applications of Computer Vision, 2021, pp. 1994–2002.
LibreCat: /record/20886

Magerkohl, Sebastian, et al. “Funktionsoptimierte AM-Gestaltung Eines E-Rotors.” Antriebstechnik - Zeitschrift Für Konstruktion, Entwicklung Und Anwendung von Antrieben Und Steuerungen , vol. 60, no. 6, Vereinigte Fachverlage GmbH, 2021, pp. 36–43.
LibreCat: /record/22447

Zimmer, Detmar, et al. “Zukunftstechnologie Und Moderne Antriebe Kombiniert: AM in Modularen Antriebssystemen.” Newsletter Der Wissenschaftlichen Gesellschaft Für Produktentwicklung, vol. 1, Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, 2021, pp. 9–10.
LibreCat: /record/22495

Klippstein, Sven Helge. Online Monitoring Des Beschichtungsprozesses Im Laser Sintern, Systementwicklung Und Einflussanalyse. 2021.
LibreCat: /record/30227

Moritzer, Elmar, et al. “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming.” Proceedings of  36th Annual Meeting of Polymer Processing Society (PPS-36).
LibreCat: /record/25283

Moritzer, Elmar, et al. Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability. Springer, 2021, pp. 112–29, doi:10.1007/978-3-030-54334-1.
LibreCat: /record/22032
DOI: 10.1007/978-3-030-54334-1

Moritzer, Elmar, et al. “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK.”10.1002/masy.202000269__Macromolecular Symposia, vol. 395, no. 1, Wiley, 2021, doi:10.1002/masy.202000269.
LibreCat: /record/24162
DOI: 10.1002/masy.202000269

Moritzer, Elmar, and Christian Schumacher. “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting.”10.1002/masy.202000275__Macromolecular Symposia, vol. 395, no. 1, 2000275, 2021, doi:10.1002/masy.202000275.
LibreCat: /record/24681
DOI: 10.1002/masy.202000275