Künneke, Thomas, and Detmar Zimmer. “Konstruktionsregeln Für Additiv Gefertigte Partikeldämpfer/Design Rules for Additive Manufactured Particle Dampers.”https://doi.org/10.37544/0720-5953-2021-11-12-72__Konstruktion, 2021, 72–78.https://doi.org/10.37544/0720-5953-2021-11-12-72 .
LibreCat: /record/27528
DOI: 10.37544/0720-5953-2021-11-12-72

Menge, Dennis, and Hans-Joachim Schmid. “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with P,” 2021.
LibreCat: /record/23760

Nickchen, Tobias, Stefan Heindorf, and Gregor Engels. “Generating Physically Sound Training Data for Image Recognition of Additively Manufactured Parts.” In Proceedings of the IEEE/CVF Winter Conference on Applications of Computer Vision, 1994–2002, 2021.
LibreCat: /record/20886

Magerkohl, Sebastian, Detmar Zimmer, Lennart Tasche, Mirko Schaper, Stefan Urbanek, and Bernd Ponick. “Funktionsoptimierte AM-Gestaltung Eines E-Rotors.” Antriebstechnik - Zeitschrift Für Konstruktion, Entwicklung Und Anwendung von Antrieben Und Steuerungen  60, no. 6 (2021): 36–43.
LibreCat: /record/22447

Zimmer, Detmar, Thorsten Koers, and Tobias Bührmann. “Zukunftstechnologie Und Moderne Antriebe Kombiniert: AM in Modularen Antriebssystemen.” Newsletter Der Wissenschaftlichen Gesellschaft Für Produktentwicklung 1 (2021): 9–10.
LibreCat: /record/22495

Klippstein, Sven Helge. “Online Monitoring Des Beschichtungsprozesses Im Laser Sintern, Systementwicklung Und Einflussanalyse.” D 07407 Rudolstadt, 2021.
LibreCat: /record/30227

Moritzer, Elmar, Felix Hecker, Christian Lennart Elsner, and André Hirsch. “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming.” In Proceedings of  36th Annual Meeting of Polymer Processing Society (PPS-36). Conference Proceedings, n.d.
LibreCat: /record/25283

Moritzer, Elmar, André Hirsch, and C. Dalmer. Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability. Springer, 2021.https://doi.org/10.1007/978-3-030-54334-1 .
LibreCat: /record/22032
DOI: 10.1007/978-3-030-54334-1

Moritzer, Elmar, Julian Wächter, and Christian Lennart Elsner. “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK.”https://doi.org/10.1002/masy.202000269__Macromolecular Symposia 395, no. 1 (2021).https://doi.org/10.1002/masy.202000269 .
LibreCat: /record/24162
DOI: 10.1002/masy.202000269

Moritzer, Elmar, and Christian Schumacher. “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting.”https://doi.org/10.1002/masy.202000275__Macromolecular Symposia 395, no. 1 (2021).https://doi.org/10.1002/masy.202000275 .
LibreCat: /record/24681
DOI: 10.1002/masy.202000275

Moritzer, Elmar, Christian Lennart Elsner, Julian Wächter, and Frederick Knoop. “Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems.” In 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat: /record/24554

Moritzer, Elmar, Christian Lennart Elsner, and Christian Schumacher. “Investigation of MetalPolymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters.”https://doi.org/10.1002/pc.26285__Polymer Composites 42, no. 11 (2021): 6065–79.https://doi.org/10.1002/pc.26285 .
LibreCat: /record/24555
DOI: 10.1002/pc.26285

Gawlikowicz, Roland. Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für  den Lasersinterprozess (Studienarbeit). Paderborn, 2021.
LibreCat: /record/43005

Moritzer, Elmar, Felix Hecker, Christian Lennart Elsner, and André Hirsch. “Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components.”https://doi.org/10.26153/tsw/17567__In Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), edited by David Bourell, 467–74, 2021.https://doi.org/10.26153/tsw/17567 .
LibreCat: /record/24101
DOI: 10.26153/tsw/17567

Moritzer, Elmar, Felix Hecker, Christine Driediger, and André Hirsch. “Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling.”https://doi.org/10.26153/tsw/17577__In Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), edited by David Bourell, 575–84, 2021.https://doi.org/10.26153/tsw/17577 .
LibreCat: /record/24099
DOI: 10.26153/tsw/17577

Moritzer, Elmar, Felix Hecker, and André Hirsch. “Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming.”https://doi.org/10.26153/tsw/17643__In Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), edited by David Bourell, 1268–75, 2021.https://doi.org/10.26153/tsw/17643 .
LibreCat: /record/24096
DOI: 10.26153/tsw/17643

Kletetzka, Ivo, Christina Kummert, and Hans-Joachim Schmid. “Laser Sintering Design Guidelines for Media Transmitting Components.”http://dx.doi.org/10.26153/tsw/17548__In Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Vol. 32. Austin: Laboratory for Freeform Fabrication and University of Texas, 2021.http://dx.doi.org/10.26153/tsw/17548 .
LibreCat: /record/24160
DOI: http://dx.doi.org/10.26153/tsw/17548

Knoop, Frederick. Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren. Vol. 18. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2020.
LibreCat: /record/24771

Fischer, Matthias. Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte. Vol. 17. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2020.
LibreCat: /record/24773

Menge, Dennis, Sven Helge Klippstein, and Hans-Joachim Schmid. Additive Leichtbaustrukturen für die Flugzeugkabine, 2020.
LibreCat: /record/24943