Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, Vol. 34. Austin: Laboratory for Freeform Fabrication and University of Texas, 2023.

Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.”https://doi.org/10.1002/masy.202200181__Macromolecular Symposia 411, no. 1 (2023).https://doi.org/10.1002/masy.202200181 .

Koers, Thorsten, and Balázs Magyar. “Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, Vol. 34, 2023.

Lammers, Stefan, Thorsten Koers, Balázs Magyar, Detmar Zimmer, and Tobias Lieneke. “Depiction of Support Structures in Technical Drawings.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, Vol. 34, 2023.

Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.”https://doi.org/10.26153/tsw/50931__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50931 .

Neitzel, Fabian, Ivo Kletetzka, and Hans-Joachim Schmid. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.”https://doi.org/10.26153/tsw/50926__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50926 .

Klippstein, Sven Helge. “Reproducibility in Polymer Laser Sintering,” 2022.

Klippstein, Sven Helge. “Neue Polymerwerkstoffe - Der Schlüssel für die Industrialisierung.” 7. AM Forum Berlin, 2022.

Moritzer, Elmar, and Christian Lennart Elsner. “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts.”https://doi.org/10.1002/masy.202100390__Macromolecular Symposia 404, no. 1 (2022).https://doi.org/10.1002/masy.202100390 .

Moritzer, Elmar, and Julian Wächter. “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process.”https://doi.org/10.1002/masy.202100389__Macromolecular Symposia 404, no. 1 (2022).https://doi.org/10.1002/masy.202100389 .

Moritzer, Elmar, and Christian Lennart Elsner. “Mit Gestaltungsrichtlinien zum Erfolg.” Kunststoffe, 2022.

Moritzer, Elmar, and Christine Driediger. “Reactive Direct Bonding of Digital Light Process Components.”https://doi.org/10.1002/masy.202100396__Macromolecular Symposia 404, no. 1 (2022).https://doi.org/10.1002/masy.202100396 .

Klippstein, Sven Helge, Florian Heiny, Nagaraju Pashikanti, Monika Gessler, and Hans-Joachim Schmid. “Powder Spread Process Monitoring in Polymer Laser Sintering and Its Influences on Part Properties.”https://doi.org/10.1007/s11837-021-05042-w __JOM - The Journal of The Minerals, Metals &; Materials Society (TMS) 74 (2022): 1149–1157.https://doi.org/10.1007/s11837-021-05042-w  .

Klippstein, Sven Helge, and Hans-Joachim Schmid. “Powder Spread Flaws in Polymer Laser Sintering and Its Influences on Mechanical Performance.” In Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium. Austin, TX, USA, 2022.

Kletetzka, Ivo, and Sven Helge Klippstein. “Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag).” In 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben . Universität Paderborn, 2022.

Hanselle, Felix Paul. Untersuchung Und Modellierung Der  Materialeigenschaften von Glaskugelgefüllten, Im  Lasersinterprozess Verarbeiteten Dry-Blends, 2022.

Kosanke, Maren. Oberflächenmodifikation von Glaskugeln Zur  Verbesserung Der Adhäsion Im  Lasersinterverfahren. Paderborn, 2022.

Henke, Frederic. Potenzialanalyse für die Nutzung additiver  Fertigungsverfahren bei einem  Büromöbelhersteller und Realisierung eines  Beispielbauteils (Studienarbeit). Paderborn, 2022.

Ostermeier, Jakob. Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem P Pulver, 2022.

Sural, Ilknur. Einfluss der Lagerdauer von P- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft. Paderborn, 2022.