Heat transfer coefficient investigation for hot die quenching process of Ti-6Al-4V alloy
M.A. Kaiser, P. Rockicki, F. Höschen, J.-N. Wesendahl, S. Konrad, T. Meyer, T. Marten, T. Tröster, in: 2022.
LibreCat: /record/49433

Isothermal hot forming of Titanium sheet metal - From parameter identification to custom parts
M.A. Kaiser, J.-N. Wesendahl, T. Meyer, in: n.d.
LibreCat: /record/49435

Effects of spherical fillers on the processability and mechanical properties of  and PP-based LS dry blends
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat: /record/30220
DOI: http://dx.doi.org/10.26153/tsw/44558

Shelf Life of Polyamide 12 () Laser Sintering Powder
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat: /record/32874
DOI: http://dx.doi.org/10.26153/tsw/44555

Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion
C. Bödger, C. Weiss, E. Schiefer, D. Heussen, C. Haefner, in: Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2022.
LibreCat: /record/50744

Investigations on Combined &lt;i&gt;In Situ&lt;/i&gt; CT and Acoustic Analysis during Clinching
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, Key Engineering Materials 926 (2022) 1489–1497.
LibreCat: /record/51197
DOI: 10.4028/p-32330d

Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, M. Gude, E-Journal of Nondestructive Testing 27 (2022).
LibreCat: /record/51192
DOI: 10.58286/27519

Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: M. Zimmermann (Ed.), Tagungsband zur Werkstoffprüfung 2022, Dresden, 2022.
LibreCat: /record/51191

Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals &;amp; Materials Series, Springer International Publishing, Cham, 2022.
LibreCat: /record/51195
DOI: 10.1007/978-3-031-06212-4_75

Charakterisierung von Schüttschichtmaterialien für den Einsatz in Filtern für häusliche Holzfeuerungsanlagen (Studienarbeit)
U. Schlattmann, J. Beimdiek, Charakterisierung von Schüttschichtmaterialien für den Einsatz in Filtern für häusliche Holzfeuerungsanlagen (Studienarbeit), Paderborn, 2022.
LibreCat: /record/51718

Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics
E. Moritzer, F. Flachmann, M. Richters, M. Neugebauer, Journal of Composites Science  (2022).
LibreCat: /record/44302

INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 1844–1858.
LibreCat: /record/33853
DOI: 10.26153/tsw/44654

Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen
C. Scheidemann, T. Hemsel, W. Sextro, Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen, LibreCat University, 2022.
LibreCat: /record/52045
DOI: 10.2314/KXP:1879655276

Heat transfer enhancement with internally channeled tubes
A.J.S. Al-Lami, E.Y. Kenig, in: 2022.
LibreCat: /record/33204

Sustainable and Smart Energy Systems for Europe's Cities and Rural Areas
A. Schlüter, J. Bernabé-Moreno, eds., Sustainable and Smart Energy Systems for Europe’s Cities and Rural Areas, 1st ed., Hanser, München, 2022.
LibreCat: /record/52353
DOI: https://www.hanser-elibrary.com/doi/book/10.3139/9783446471757

Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
LibreCat: /record/36332
DOI: 10.1002/adem.202200874

Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat: /record/29724
DOI: 10.1177/14644207221075838

Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg
M. Neuser, O. Grydin, Y. Frolov, M. Schaper, Production Engineering (2022).
LibreCat: /record/29505
DOI: 10.1007/s11740-022-01106-1

Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
LibreCat: /record/31828
DOI: 10.1016/j.jajp.2022.100108

Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.-R. Bielak, J. Troschitz, Journal of Advanced Joining Processes (2022).
LibreCat: /record/31238
DOI: 10.1016/j.jajp.2022.100108