Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.”10.4028/p-5fxp53__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1457–67, doi:10.4028/p-5fxp53.

Köhler, Daniel, et al. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.”10.4028/p-32330d__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1489–97, doi:10.4028/p-32330d.

Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.”10.4028/p-5d009y__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1516–26, doi:10.4028/p-5d009y.

Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.”10.4028/p-wpuzyw__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:10.4028/p-wpuzyw.

Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”10.4028/p-1n6741__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1468–78, doi:10.4028/p-1n6741.

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.”10.4028/p-3rk19y__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 683–89, doi:10.4028/p-3rk19y.

Kersting, Lukas, et al. “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes.”10.4028/p-yp2hj3__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 862–74, doi:10.4028/p-yp2hj3.

Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.”10.4028/p-5fxp53__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1457–67, doi:10.4028/p-5fxp53.

Köhler, Daniel, et al. “Investigations on Combined &;lt;I&;gt;In Situ&;lt;/I&;gt; CT and Acoustic Analysis during Clinching.”10.4028/p-32330d__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1489–97, doi:10.4028/p-32330d.

Otroshi, Mortaza, et al. “Modeling of Stiffness Anisotropy in Simulation of Self-Piercing Riveted Components.”https://doi.org/10.4028/www.scientific.net/KEM.883.35__Key Engineering Materials, vol. 883, Trans Tech Publications Ltd, 2021, pp. 35–40, doi:https://doi.org/10.4028/www.scientific.net/KEM.883.35.

Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.”10.4028/www.scientific.net/kem.883.81__Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 81–88, doi:10.4028/www.scientific.net/kem.883.81.

Weiß, Deborah, et al. “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HX.”10.4028/www.scientific.net/kem.883.127__Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 127–32, doi:10.4028/www.scientific.net/kem.883.127.

Kappe, Fabian, et al. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.”10.4028/www.scientific.net/kem.883.3__Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 3–10, doi:10.4028/www.scientific.net/kem.883.3.

Steinfelder, Christian, et al. “Load Path Transmission in Joining Elements.”10.4028/www.scientific.net/kem.883.73__Key Engineering Materials, 2021, pp. 73–80, doi:10.4028/www.scientific.net/kem.883.73.

Köhler, Daniel, et al. “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”10.4028/www.scientific.net/kem.883.89__Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 89–96, doi:10.4028/www.scientific.net/kem.883.89.

Wiesenmayer, Sebastian, et al. “Numerical Investigation of the Tool Load in Joining by Forming of Dissimilar Materials Using Shear-Clinching Technology.”10.4028/www.scientific.net/kem.767.397__Key Engineering Materials, 2018, pp. 397–404, doi:10.4028/www.scientific.net/kem.767.397.

Han, Daxin, et al. “Shear-Clinching of Multi-Element Specimens of Aluminium Alloy and Ultra-High-Strength Steel.”10.4028/www.scientific.net/kem.767.389__Key Engineering Materials, 2018, pp. 389–96, doi:10.4028/www.scientific.net/kem.767.389.

Schweizer, Swetlana, et al. “Separation of Hybrid Structures for the Reclaim of Their Single Components.”10.4028/www.scientific.net/kem.742.568__Key Engineering Materials, 2017, pp. 568–75, doi:10.4028/www.scientific.net/kem.742.568.

Müller, Martin, et al. “Development of a Testing Method for the Identification of Friction Coefficients for Numerical Modeling of the Shear-Clinching Process.”10.4028/www.scientific.net/kem.639.469__Key Engineering Materials, vol. 639, Trans Tech Publications, Ltd., 2015, pp. 469–76, doi:10.4028/www.scientific.net/kem.639.469.

Homberg, Werner, et al. “Internal Flow-Turning - An Innovative Technology for the Manufacture of Tailored Tubes.”10.4028/www.scientific.net/kem.639.65__Key Engineering Materials, edited by M. Merklein et al., vol. 639, Trans Tech Publications Ltd, 2015, pp. 65–70, doi:10.4028/www.scientific.net/kem.639.65.

Merklein, Marion, et al. “Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology.”10.4028/www.scientific.net/kem.611-612.1413__Key Engineering Materials, vol. 611–612, Trans Tech Publications, Ltd., 2014, pp. 1413–20, doi:10.4028/www.scientific.net/kem.611-612.1413.

Homberg, Werner, and Tim Rostek. “Thermo-Mechanical Hardening of Ultra High-Strength Steels.”10.4028/www.scientific.net/kem.549.133__Key Engineering Materials, 2013, pp. 133–40, doi:10.4028/www.scientific.net/kem.549.133.

Schmidt, Hans Christian, et al. “Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements.”10.4028/www.scientific.net/kem.504-506.295__Key Engineering Materials, 2012, pp. 295–300, doi:10.4028/www.scientific.net/kem.504-506.295.

Homberg, Werner, and Tim Rostek. “High Performance Active Elements for Agricultural Machines Made of Ultra High-Strength Steels.”10.4028/www.scientific.net/kem.473.229__Key Engineering Materials, 2011, pp. 229–34, doi:10.4028/www.scientific.net/kem.473.229.

Mahnken, Rolf. “Mode Decomposition for Creep Simulation of Asymmetric Effects with Applications to Superalloys.”10.4028/www.scientific.net/kem.251-252.357__Key Engineering Materials, 2009, pp. 357–62, doi:10.4028/www.scientific.net/kem.251-252.357.