Gräßler, Iris, Iryna Mozgova, Jens Pottebaum, Manuel Ott, Philipp Jung, and Philipp Hesse. “Handling of Uncertainties in the Design of Sustainable Additive Manufacturing Products by Merging Design-for-X and Scenario-Technique.” In Procedia CIRP ICME, edited by Roberto Teti. Elsevier, 2023.
LibreCat: /record/46451

Lammers, Stefan, Thorsten Koers, Balázs Magyar, Detmar Zimmer, and Tobias Lieneke. “Depiction of Support Structures in Technical Drawings.” Austin, Texas, USA, 2023.
LibreCat: /record/46745

Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.”https://doi.org/10.26153/tsw/50931__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50931 .
LibreCat: /record/51218
DOI: https://doi.org/10.26153/tsw/50931

Neitzel, Fabian, Ivo Kletetzka, and Hans-Joachim Schmid. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.”https://doi.org/10.26153/tsw/50926__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50926 .
LibreCat: /record/46862
DOI: https://doi.org/10.26153/tsw/50926

Ott, Manuel, Niclas Meihöfener, and Rainer Koch. “Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien.”https://doi.org/10.48447/ADD-2022-014__In Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, edited by Deutscher Verband für Materialforschung und -prüfung e.V. , 7:91–106. Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen. Berlin, 2022.https://doi.org/10.48447/ADD-2022-014 .
LibreCat: /record/36866
DOI: 10.48447/ADD-2022-014

Urbanek, Stefan, Frey Pauline, Sebastian Magerkohl, Detmar Zimmer, Lennart Tasche, Mirko Schaper, and Bernd Ponick. “Design and Experimental Investigation of an Additively Manufactured PMSM Rotor,”https://doi.org/10.1109/IEMDC47953.2021.9449566__2021.https://doi.org/10.1109/IEMDC47953.2021.9449566 .
LibreCat: /record/24426
DOI: 10.1109/IEMDC47953.2021.9449566

Zhuravlev, Evgeny, Benjamin Milkereit, Bin Yang, Steffen Heiland, Pascal Vieth, Markus Voigt, Mirko Schaper, Guido Grundmeier, Christoph Schick, and Olaf Kessler. “Assessment of AlZnMgCu Alloy Powder Modification for Crack-Free Laser Powder Bed Fusion by Differential Fast Scanning Calorimetry.”https://doi.org/10.1016/j.matdes.2021.109677__Materials &; Design, 2021.https://doi.org/10.1016/j.matdes.2021.109677 .
LibreCat: /record/24589
DOI: 10.1016/j.matdes.2021.109677

Ahlers, Dominik. Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V . Vol. 19. Forschungsberichte des Direct Manufacturing Research Centers. Shaker, 2020.
LibreCat: /record/21209

Josupeit, Stefan. On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process. Vol. 11. Forschungsberichte Des Direct Manufacturing Research Centers. Düren: Shaker Verlag GmbH, 2019.
LibreCat: /record/24753