Gräßler, Iris, Iryna Mozgova, Jens Pottebaum, Manuel Ott, Philipp Jung, and Philipp Hesse. “Handling of Uncertainties in the Design of Sustainable Additive Manufacturing Products by Merging Design-for-X and Scenario-Technique.” In Procedia CIRP ICME, edited by Roberto Teti. Elsevier, 2023.

Lammers, Stefan, Thorsten Koers, Balázs Magyar, Detmar Zimmer, and Tobias Lieneke. “Depiction of Support Structures in Technical Drawings.” Austin, Texas, USA, 2023.

Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.”https://doi.org/10.26153/tsw/50931__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50931 .

Neitzel, Fabian, Ivo Kletetzka, and Hans-Joachim Schmid. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.”https://doi.org/10.26153/tsw/50926__In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.https://doi.org/10.26153/tsw/50926 .

Ott, Manuel, Niclas Meihöfener, and Rainer Koch. “Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien.”https://doi.org/10.48447/ADD-2022-014__In Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, edited by Deutscher Verband für Materialforschung und -prüfung e.V. , 7:91–106. Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen. Berlin, 2022.https://doi.org/10.48447/ADD-2022-014 .

Urbanek, Stefan, Frey Pauline, Sebastian Magerkohl, Detmar Zimmer, Lennart Tasche, Mirko Schaper, and Bernd Ponick. “Design and Experimental Investigation of an Additively Manufactured PMSM Rotor,”https://doi.org/10.1109/IEMDC47953.2021.9449566__2021.https://doi.org/10.1109/IEMDC47953.2021.9449566 .

Zhuravlev, Evgeny, Benjamin Milkereit, Bin Yang, Steffen Heiland, Pascal Vieth, Markus Voigt, Mirko Schaper, Guido Grundmeier, Christoph Schick, and Olaf Kessler. “Assessment of AlZnMgCu Alloy Powder Modification for Crack-Free Laser Powder Bed Fusion by Differential Fast Scanning Calorimetry.”https://doi.org/10.1016/j.matdes.2021.109677__Materials &; Design, 2021.https://doi.org/10.1016/j.matdes.2021.109677 .

Ahlers, Dominik. Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V . Vol. 19. Forschungsberichte des Direct Manufacturing Research Centers. Shaker, 2020.

Josupeit, Stefan. On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process. Vol. 11. Forschungsberichte Des Direct Manufacturing Research Centers. Düren: Shaker Verlag GmbH, 2019.