E. Cara et al., “Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers,”10.1021/acsapm.2c02094__ACS Applied Polymer Materials, vol. 5, no. 3, pp. 2079–2087, 2023, doi:10.1021/acsapm.2c02094 .

J. Lückenkötter, J. P. Leimbach, T. Stallmeister, T. Marten, and T. Tröster, “Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector,”10.21741/9781644902479-27__in Materials Research Proceedings, Krakow, Poland, 2023, vol. 28, pp. 249–258, doi:10.21741/9781644902479-27 .

D. Baier, T. Priamushko, C. Weinberger, F. Kleitz, and M. Tiemann, “Selective Discrimination between CO and10.1021/acssensors.2c02739__with Copper–Ceria-Resistive Gas Sensors,”10.1021/acssensors.2c02739__ACS Sensors, vol. 8, no. 4, pp. 1616–1623, 2023, doi:10.1021/acssensors.2c02739 .

K. Brennig and O. Müller, “More Isn’t Always Better – Measuring Customers’ Preferences for Digital Process Transparency,” presented at the  56th Hawaii International Conference on System Sciences, Lhain, 2023.

J. Popp, D. Römisch, M. Merklein, and D. Drummer, “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures,”10.3390/app12104962__Applied Sciences, vol. 12, no. 10, Art. no. 4962, 2022, doi:10.3390/app12104962 .

T. Ahlers, F. W. Edossa, M. Uckert, and U. Kosi, Insolvcency Process in Germany and the insol database: A research Note. 2022.

T. D. Joy, D. Weiß, B. Schramm, and G. Kullmer, “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations,”10.3390/app12157557__Applied Sciences, vol. 12, no. 15, Art. no. 7557, 2022, doi:10.3390/app12157557 .

I. Gräßler, C. Oleff, and D. Preuß, “Proactive Management of Requirement Changes in the Development of Complex Technical Systems,”10.3390/app12041874__Applied Sciences, vol. 12, no. 4, Art. no. 1874, 2022, doi:10.3390/app12041874 .

S. H. Klippstein and H.-J. Schmid, “Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance,” 2022.

K. Arslan and M. Trier, “Towards a Process Model for Social Media Marketing,” presented at the ACIS 2022, Melbourne, Australia, 2022.

R. Peters et al., “A Techno-Economic Assessment of Fischer–Tropsch Fuels Based on Syngas from Co-Electrolysis,”10.3390/pr10040699__Processes, vol. 10, no. 4, Art. no. 699, 2022, doi:10.3390/pr10040699 .

M. Röglinger et al., “Exogenous Shocks and Business Process Management,”10.1007/s12599-021-00740-w__Business &; Information Systems Engineering, vol. 64, no. 5, pp. 669–687, 2022, doi:10.1007/s12599-021-00740-w .

M. Otroshi, G. Meschut, and A. Nesakumar, “The influence of manufacturing processes and optical measurement methods on the damage behavior of LAD micro-alloyed steels,”https://doi.org/10.37255/jme.v16i3pp070-076__Journal of Manufacturing Engineering, vol. 16, no. 3, pp. 70–76, 2021, doi:https://doi.org/10.37255/jme.v16i3pp070-076 .

M. A. R. da Silva et al., “Sustainable oxidation catalysis supported by light: Fe-poly (heptazine imide) as a heterogeneous single-atom photocatalyst,”10.1016/j.apcatb.2021.120965__Applied Catalysis B: Environmental, vol. 304, Art. no. 120965, 2021, doi:10.1016/j.apcatb.2021.120965 .

M. A. R. da Silva et al., “Sustainable oxidation catalysis supported by light: Fe-poly (heptazine imide) as a heterogeneous single-atom photocatalyst,”10.1016/j.apcatb.2021.120965__Applied Catalysis B: Environmental, vol. 304, Art. no. 120965, 2021, doi:10.1016/j.apcatb.2021.120965 .

B. Arian, W. Homberg, M. Riepold, A. Trächtler, J. Rozo Vasquez, and F. Walther, “Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming,” presented at the 24th International Conference on Material Forming - ESAFORM 2021, Liège, Belgium, 2021.

D. Liu et al., “A composite consisting of intermetallic Ni3Fe and nitrogen-doped carbon for electrocatalytic water oxidation: The effect of increased pyridinic nitrogen dopant,”10.1016/j.ceramint.2021.11.123__Ceramics International, vol. 48, no. 4, pp. 5759–5765, 2021, doi:10.1016/j.ceramint.2021.11.123 .

R. Schemmel, V. Krieger, T. Hemsel, and W. Sextro, “Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization,”https://doi.org/10.1016/j.microrel.2021.114077__Microelectronics Reliability, vol. 119, p. 114077, 2021, doi:https://doi.org/10.1016/j.microrel.2021.114077 .

K. J. Rohlfing et al., “Explanation as a Social Practice: Toward a Conceptual Framework for the Social Design of AI Systems,”10.1109/tcds.2020.3044366__IEEE Transactions on Cognitive and Developmental Systems, vol. 13, no. 3, pp. 717–728, 2021, doi:10.1109/tcds.2020.3044366 .

D. Schroder, S. Lange, C. Hangmann, and C. Hedayat, “Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs,” in Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis, 1st ed., Croyton, UK:  The Institution of Engineering and Technology (IET), 2020, pp. 315-346 (32).

C. R. Bielak, M. Böhnke, R. Beck, M. Bobbert, and G. Meschut, “Numerical analysis of the robustness of clinching process considering the pre-forming of the parts ,”https://doi.org/10.1016/j.jajp.2020.100038__Journal of Advanced Joining Processes. , 2020, doi:https://doi.org/10.1016/j.jajp.2020.100038 .

M. Wortmann et al., “The Deterioration Mechanism of Silicone Molds in Polyurethane Vacuum Casting,”10.1021/acsapm.0c00744__ACS Applied Polymer Materials, vol. 2, no. 11, pp. 4719–4732, 2020, doi:10.1021/acsapm.0c00744 .

M. Pannok, M. Finkbeiner, H. Fasel, J. Riese, and S. Lier, “Transformable Decentral Production for Local Economies with Minimized Carbon Footprint,”10.1002/cben.202000008__ChemBioEng Reviews, vol. 7, no. 6, pp. 216–228, 2020, doi:10.1002/cben.202000008 .

D. Beverungen et al., “Seven Paradoxes of Business Process Management in a Hyper-Connected World,”10.1007/s12599-020-00646-z__Business &; Information Systems Engineering, vol. 63, pp. 145–156, 2020, doi:10.1007/s12599-020-00646-z .

V. Gawehn, Banks and Corporate Income Taxation: A Review. SSRN, 2019.

C. Stegehake, J. Riese, and M. Grünewald, “Modeling and Validating FixedBed Reactors: A StateoftheArt Review,”10.1002/cben.201900002__ChemBioEng Reviews, vol. 6, no. 2, pp. 28–44, 2019, doi:10.1002/cben.201900002 .

C. Dymel, R. Schemmel, T. Hemsel, W. Sextro, M. Brökelmann, and M. Hunstig, “Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding,” in (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan), 2018, pp. 41–44.

A. Unger, M. Hunstig, T. Meyer, M. Brökelmann, and W. Sextro, “Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and Challenges,” in In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, 2018, vol. Vol. 2018, No. 1, pp. 000572-000577.

S. Lier et al., “Innovative scaling strategies for a fast development of apparatuses by modular process engineering,”10.1016/j.cep.2017.10.026__Chemical Engineering and Processing - Process Intensification, vol. 123, pp. 111–125, 2017, doi:10.1016/j.cep.2017.10.026 .

E. Gorbacheva, A. Stein, T. Schmiedel, and O. Müller, “The Role of Gender in Business Process Management Competence Supply,” Business and Information Systems Engineering, no. 3, pp. 213--231, 2016.

O. Müller, T. Schmiedel, E. Gorbacheva, and J. vom Brocke, “Towards a typology of business process management professionals: identifying patterns of competences through latent semantic analysis,” Enterprise Information Systems, no. 1, pp. 50--80, 2016.

T. Gries and C.-J. Haake, An Economic Theory of “Destabilization War,” vol. 95. 2016.

T. Meyer  et al., “Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation,” in IEEE 66th Electronic Components and Technology Conference, 2016, pp. 622–628.

A. Unger et al., “Validated Simulation of the Ultrasonic Wire Bonding Process,” in Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, 2016, pp. 251–254.

“Structure of Ultrahigh Molecular Weight Polyethylene-Air Counterflow Flame,”10.15372/fgv20160302__Ca CeCdDf10.15372/fgv20160302__Db, no. 3, 2016, doi:10.15372/fgv20160302 .

T. Brahm, F. Zellweger, T. Jenert, and G. Thomann, “Developing study programs as a continuous task-the role of educational developers,” presented at the ICED 2014f: Educational Development in a Changing World, Stockholm, 2014.

S. Althoff, J. Neuhaus, T. Hemsel, and W. Sextro, “Improving the bond quality of copper wire bonds using a friction model approach,” in Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 2014, pp. 1549–1555.

T. Werner and N. Tenhumberg, “Synthesis of cyclic carbonates from epoxides and CO2 catalyzed by potassium iodide and amino alcohols,”10.1016/j.jcou.2014.04.002__Journal of CO2 Utilization, vol. 7, pp. 39–45, 2014, doi:10.1016/j.jcou.2014.04.002 .

J. Becker, D. Beverungen, R. Knackstedt, M. Matzner, O. Müller, and J. Pöppelbuss, “Designing interaction routines in service networks: A modularity and social construction-based approach,” Scandinavian Journal of Information Systems, no. 1, pp. 17--47, 2013.

J. Becker, D. Beverungen, R. Knackstedt, M. Matzner, O. Müller, and J. Pöppelbuss, “Bridging the gap between manufacturing and service through IT-based boundary objects,” IEEE Transactions on Engineering Management, no. 3, pp. 468--482, 2013.

H. Alex, N. Steinfeldt, K. Jähnisch, M. Bauer, and S. Hübner, “On the selective aerobic oxidation of benzyl alcohol with Pd/Au-nanoparticles in batch and flow,”10.1515/ntrev-2012-0085__Nanotechnology Reviews, vol. 3, no. 1, pp. 99–110, 2013, doi:10.1515/ntrev-2012-0085 .

T. Jenert, Studienprogramme als didaktische Gestaltungs-und Untersuchungseinheit: Theoretische Grundlegung und empirische Analyse. Universität St. Gallen, 2012.

C. Janiesch, M. Matzner, and O. Müller, “Beyond process monitoring: A proof-of-concept of event-driven business activity management,” Business Process Management Journal, no. 4, pp. 625--643, 2012.

P. Bornmann, T. Hemsel, W. Sextro, T. Maeda, and T. Morita, “Non-perturbing cavitation detection / monitoring in sonochemical reactors,” in Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 1141–1144.

T. Jenert, “Die Studierenden? - Ein sozio-kultureller Blick auf das Studieren in Bologna-Strukturen,” Zeitschrift für Hochschulentwicklung, vol. 6, no. 2, pp. 61–77, 2011.

C. Janiesch, M. Matzner, and O. Müller, “A blueprint for event-driven business activity management,” in Lecture Notes in Computer Science, 2011.

N. Kretzschmar and V. Schöppner, “Simulating Tightly Intermeshing, Co-Rotating Twin Screw Extruders with SIGMA,” in Proceedings of the 2010 Summer Computer Simulation Conference, 2010, pp. 133–140.

M. Becker, G. Di Guglielmo, F. Fummi, W. Müller, G. Pravadelli, and T. Xie, “RTOS-Aware Refinement for TLM2.0-based HW/SW Design,”10.1109/DATE.2010.5456965__presented at the Design, Automation &; Test in Europe Conference &; Exhibition (DATE 2010), Dresden, 2010, doi:10.1109/DATE.2010.5456965 .

W. Müller et al., “The SATURN Approach to SysML-based HW/SW Codesign,”10.1007/978-94-007-1488-5_9__2010, doi:10.1007/978-94-007-1488-5_9 .

J. Pottebaum, A. M. Japs, S. Prödel, and R. Koch, “Design and modeling of a domain ontology for fire protection,” in ISCRAM 2010 -- 7th International Conference on Information Systems for Crisis Response and Management, 2010.

S. Peschke and R. Haeb-Umbach, “Velocity Estimation of Mobile Terminals by Exploiting GSM Downlink Signalling,” in 4th Workshop on Positioning Navigation and Communication (WPNC 2007), 2007, pp. 217–222.

S. Flake, C. Geiger, W. Müller, and J. Ruf, “Customer-Oriented Systems Design through Virtual Prototyps,”10.1109/ENABL.2001.953425__presented at the Proceedings Tenth IEEE International Workshop on Enabling Technologies: Infrastructure for Collaborative Enterprises, 2001, doi:10.1109/ENABL.2001.953425 .

C. Geiger, G. Lehrenfeld, and W. Müller, “Visual Specification, Modeling, and Illustrations of Complex Systems,”10.1109/HICSS.1999.772621__presented at the Proceedings of the 32nd Annual Hawaii International Conference on Systems Sciences 1999, Maui, Hawaii, 1999, doi:10.1109/HICSS.1999.772621 .

E. Börger, U. Glässer, and W. Müller, “A Formal Definition of an Abstract VHDL’93 Simulator by EA-Machines,” in Semantics of VHDL, C. Delgado Kloos and P. T. Breuer, Eds. Dordrecht: Kluwer Academic Publishers, 1995, pp. 107–139.