Niemann, Valerie A., et al. “X-Ray Absorption Spectroscopy Reveals Mechanisms of Calcium and Silicon Fouling on Reverse Osmosis Membranes Used in Wastewater Reclamation.”10.1021/acsestwater.3c00144__ACS ES&;T Water, vol. 3, American Chemical Society (ACS), 2023, pp. 2627–37, doi:10.1021/acsestwater.3c00144.

Duderija, B., et al. “Electropolymerization of Acrylic Acid on Steel for Enhanced Joining by Plastic Deformation.”10.1016/j.jajp.2023.100181__Journal of Advanced Joining Processes, vol. 9, 100181, Elsevier BV, 2023, doi:10.1016/j.jajp.2023.100181.

Kasse, Robert M., et al. “Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries.”10.1021/acsaem.2c00806__ACS Applied Energy Materials, vol. 5, no. 7, American Chemical Society (ACS), 2022, pp. 8273–81, doi:10.1021/acsaem.2c00806.

Harzheim, Sven, et al. “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations.”10.1016/j.jajp.2022.100130__Journal of Advanced Joining Processes, vol. 6, 100130, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100130.

Kaczmarek, D., et al. “Activation Effect of Ozone and DME on the Partial Oxidation of Natural Gas Surrogates and Validation of Pressure-Dependent Ozone Decomposition.”10.1016/j.jaecs.2022.100107__Applications in Energy and Combustion Science, 100107, Elsevier BV, 2022, doi:10.1016/j.jaecs.2022.100107.

Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.

Meschut, G., et al. “Review on Mechanical Joining by Plastic Deformation.”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.”10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, 100135, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100135.

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.”10.1016/j.jajp.2022.100133__Journal of Advanced Joining Processes, vol. 6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.”10.1016/j.jajp.2022.100134__Journal of Advanced Joining Processes, 100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.

Duderija, B., et al. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.”10.1016/j.jajp.2022.100137__Journal of Advanced Joining Processes, vol. 7, 100137, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100137.

Peters, Ralf, et al. “A Techno-Economic Assessment of Fischer–Tropsch Fuels Based on Syngas from Co-Electrolysis.”10.3390/pr10040699__Processes, vol. 10, no. 4, 699, MDPI AG, 2022, doi:10.3390/pr10040699.

Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.

Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.

Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.

Zhai, Qingfeng, et al. “Carbon-Based Metal-Free Electrocatalysts: Past, Present, and Future.”10.1021/accountsmr.1c00190__Accounts of Materials Research, vol. 2, no. 12, American Chemical Society (ACS), 2021, pp. 1239–50, doi:10.1021/accountsmr.1c00190.

Köhler, D., et al. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”10.1016/j.jajp.2021.100089__Journal of Advanced Joining Processes, vol. 5, 100089, Elsevier BV, 2021, doi:10.1016/j.jajp.2021.100089.

Köhler, Daniel, et al. “Clinching in In-Situ CT—A Numerical Study on Suitable Tool Materials.”10.1016/j.jajp.2020.100034__Journal of Advanced Joining Processes, vol. 2, 100034, Elsevier BV, 2020, doi:10.1016/j.jajp.2020.100034.

Pannok, Maik, et al. “Transformable Decentral Production for Local Economies with Minimized Carbon Footprint.”10.1002/cben.202000008__ChemBioEng Reviews, vol. 7, no. 6, Wiley, 2020, pp. 216–28, doi:10.1002/cben.202000008.

Stegehake, Carolin, et al. “Modeling and Validating FixedBed Reactors: A StateoftheArt Review.”10.1002/cben.201900002__ChemBioEng Reviews, vol. 6, no. 2, Wiley, 2019, pp. 28–44, doi:10.1002/cben.201900002.