P. Lenz and R. Mahnken, “Multiscale simulation of polymer curing of composites combined mean-field homogenisation methods at large strains,”10.1016/j.ijsolstr.2023.112642__International Journal of Solids and Structures, vol. 290, Art. no. 112642, 2024, doi:10.1016/j.ijsolstr.2023.112642 .
LibreCat: /record/52218
DOI: 10.1016/j.ijsolstr.2023.112642

I. Gräßler, D. Wiechel, A.-S. Koch, T. Sturm, and T. Markfelder, “Methodology for Certification-Compliant Effect-Chain Modeling,”10.3390/systems11030154__Systems, vol. 11, no. 3, Art. no. 154, 2023, doi:10.3390/systems11030154 .
LibreCat: /record/44382
DOI: 10.3390/systems11030154

C. Link, K. Malena, S. Gausemeier, and A. Trächtler, “Simulation Environment for Traffic Control Systems Targeting Mixed Autonomy Traffic Scenarios,”10.5220/0011987600003479__presented at the 9th International Conference on Vehicle Technology and Intelligent Transport Systems (VEHITS 2023), Prague, Czech Republic, 2023, doi:10.5220/0011987600003479 .
LibreCat: /record/44390
DOI: 10.5220/0011987600003479

A. Andreiev et al., “Powder bed fusion of soft-magnetic iron-based alloys with high silicon content,”10.1016/j.jmatprotec.2023.117991__Journal of Materials Processing Technology, vol. 317, Art. no. 117991, 2023, doi:10.1016/j.jmatprotec.2023.117991 .
LibreCat: /record/44078
DOI: 10.1016/j.jmatprotec.2023.117991

D. Wilke, R. Grothe, L. Bretz, H. Anacker, and R. Dumitrescu, “Lessons Learned from the Introduction of Systems Engineering,”10.3390/systems11030119__Systems, vol. 11, no. 3, Art. no. 119, 2023, doi:10.3390/systems11030119 .
LibreCat: /record/47800
DOI: 10.3390/systems11030119

P. Franke, I. Shabanilemraski, M. Schubert, U. Hampel, and E. Y. Kenig, “A new approach to model the fluid dynamics in sandwich packings,”10.1515/cppm-2023-0054__Chemical Product and Process Modeling, vol. 0, no. 0, 2023, doi:10.1515/cppm-2023-0054 .
LibreCat: /record/48580
DOI: 10.1515/cppm-2023-0054

P. Lenz, P. Kreutzheide, and R. Mahnken, “Multiphase elasto-plastic mean-field homogenisation and its consistent linearisation,”10.1016/j.compstruc.2023.107160__Computers &;amp; Structures, vol. 290, Art. no. 107160, 2023, doi:10.1016/j.compstruc.2023.107160 .
LibreCat: /record/48673
DOI: 10.1016/j.compstruc.2023.107160

F. Fröde et al., Eds., Large eddy simulation of iron oxide formation in a laboratory spray flame. Elsevier, 2023.
LibreCat: /record/51136
DOI: https://doi.org/10.1016/j.jaecs.2023.100191

N. Klowait, “On the Multimodal Resolution of a Search Sequence in Virtual Reality,”10.1155/2023/8417012__Human Behavior and Emerging Technologies, vol. 2023, pp. 1–15, 2023, doi:10.1155/2023/8417012 .
LibreCat: /record/43437
DOI: 10.1155/2023/8417012

Y. Tao and M. Winkler, “Global smooth solutions in a three-dimensional cross-diffusive SIS epidemic model with saturated taxis at large densities,”10.3934/eect.2023031__Evolution Equations and Control Theory, vol. 12, no. 6, pp. 1676–1687, 2023, doi:10.3934/eect.2023031 .
LibreCat: /record/53317
DOI: 10.3934/eect.2023031

Y. Tao and M. Winkler, “Small-signal solutions to a nonlocal cross-diffusion model for interaction of scroungers with rapidly diffusing foragers,”10.1142/s0218202523500045__Mathematical Models and Methods in Applied Sciences, vol. 33, no. 01, pp. 103–138, 2023, doi:10.1142/s0218202523500045 .
LibreCat: /record/53328
DOI: 10.1142/s0218202523500045

S. B. Schneider, S. Werner, R. Khalili, A. Hecker, and H. Karl, “mobile-env: An Open Platform for Reinforcement Learning in Wireless Mobile Networks,” presented at the IEEE/IFIP Network Operations and Management Symposium (NOMS), Budapest, 2022.
LibreCat: /record/30236

J. Holtmann, J. Deantoni, and M. Fockel, “Early timing analysis based on scenario requirements and platform models,”10.1007/s10270-022-01002-3__Software and Systems Modeling, 2022, doi:10.1007/s10270-022-01002-3 .
LibreCat: /record/31071
DOI: 10.1007/s10270-022-01002-3

S. Lange, C. Hedayat, H. Kuhn, and U. Hilleringmann, “Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings,”10.1109/ssi56489.2022.9901416__presented at the 2022 Smart Systems Integration (SSI), Grenoble, France, 2022, doi:10.1109/ssi56489.2022.9901416 .
LibreCat: /record/33508
DOI: 10.1109/ssi56489.2022.9901416

S. A. Bernemann, J. Makowiak, J. Makowiak, R. Bertling, N. Lutters, and E. Kenig, “Development of an innovative separation unit for nitrogen recovery from agricultural waste,” presented at the ACHEMA Congress, Frankfurt am Main, 2022.
LibreCat: /record/33522

Y. Shi, S. Harzheim, M. Hofmann, and T. Wallmersperger, “A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement,” in Material Modeling and Structural Mechanics, Cham: Springer International Publishing, 2022.
LibreCat: /record/34209
DOI: 10.1007/978-3-030-97675-0_9

M. Protte, R. Fahr, and D. E. Quevedo, “Behavioral Economics for Human-in-the-Loop Control Systems Design: Overconfidence and the Hot Hand Fallacy,”10.1109/mcs.2020.3019723__IEEE Control Systems, vol. 40, no. 6, pp. 57–76, 2022, doi:10.1109/mcs.2020.3019723 .
LibreCat: /record/35586
DOI: 10.1109/mcs.2020.3019723

T. Black and M. Winkler, “Global weak solutions and absorbing sets in a chemotaxis-Navier–Stokes system with prescribed signal concentration on the boundary,”10.1142/s021820252250004x__Mathematical Models and Methods in Applied Sciences, vol. 32, no. 01, pp. 137–173, 2022, doi:10.1142/s021820252250004x .
LibreCat: /record/34676
DOI: 10.1142/s021820252250004x

L. Simo Kamga, D. Meffert, B. Magyar, M. Oehler, and B. Sauer, “Simulative investigation of the influence of surface texturing on the elastohydrodynamic lubrication in chain joints,”https://doi.org/10.1016/j.triboint.2022.107564__Tribology International, vol. 171, p. 107564, 2022, doi:https://doi.org/10.1016/j.triboint.2022.107564 .
LibreCat: /record/34434
DOI: https://doi.org/10.1016/j.triboint.2022.107564

M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi:10.1016/j.ijfatigue.2022.107235 .
LibreCat: /record/41496
DOI: 10.1016/j.ijfatigue.2022.107235

M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi:10.1016/j.ijfatigue.2022.107235 .
LibreCat: /record/41490
DOI: 10.1016/j.ijfatigue.2022.107235

A. Nikfarjam, A. Neumann, J. Bossek, and F. Neumann, “Co-Evolutionary Diversity Optimisation for the Traveling Thief Problem,”10.1007/978-3-031-14714-2_17__in Parallel Problem Solving from Nature (PPSN XVII), 2022, pp. 237–249, doi:10.1007/978-3-031-14714-2_17 .
LibreCat: /record/48894
DOI: 10.1007/978-3-031-14714-2_17

H. Garcke, B. Kovács, and D. Trautwein, “Viscoelastic Cahn–Hilliard models for tumor growth,”10.1142/s0218202522500634__Mathematical Models and Methods in Applied Sciences, vol. 32, no. 13, pp. 2673–2758, 2022, doi:10.1142/s0218202522500634 .
LibreCat: /record/45970
DOI: 10.1142/s0218202522500634

N. Bellomo, N. Outada, J. Soler, Y. Tao, and M. Winkler, “Chemotaxis and cross-diffusion models in complex environments: Models and analytic problems toward a multiscale vision,”10.1142/s0218202522500166__Mathematical Models and Methods in Applied Sciences, vol. 32, no. 04, pp. 713–792, 2022, doi:10.1142/s0218202522500166 .
LibreCat: /record/53336
DOI: 10.1142/s0218202522500166

P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, vol. 22. Düren: Shaker Verlag GmbH, 2021.
LibreCat: /record/24760

J. Kessler, F. Calcavecchia, and T. Kühne, “Artificial Neural Networks as Trial Wave Functions for Quantum Monte Carlo,”10.1002/adts.202000269__Advanced Theory and Simulations, vol. 4, no. 4, Art. no. 2000269, 2021, doi:10.1002/adts.202000269 .
LibreCat: /record/33649
DOI: 10.1002/adts.202000269

M. Schulze Darup, A. B. Alexandru, D. E. Quevedo, and G. J. Pappas, “Encrypted Control for Networked Systems: An Illustrative Introduction and Current Challenges,”10.1109/mcs.2021.3062956__IEEE Control Systems, vol. 41, no. 3, pp. 58–78, 2021, doi:10.1109/mcs.2021.3062956 .
LibreCat: /record/35575
DOI: 10.1109/mcs.2021.3062956

C. Cheng et al., “Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure,”10.1016/j.compositesb.2021.109209__Composites Part B: Engineering, vol. 224, Art. no. 109209, 2021, doi:10.1016/j.compositesb.2021.109209 .
LibreCat: /record/23431
DOI: 10.1016/j.compositesb.2021.109209

K. Malena, C. Link, S. Mertin, S. Gausemeier, and A. Trächtler, “Online State Estimation for Microscopic Traffic Simulations using Multiple Data Sources*,” in VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems, Online Streaming, 2021, vol. 7, pp. 386–395.
LibreCat: /record/24159

S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,”10.1016/j.ijfatigue.2021.106498__International Journal of Fatigue, vol. 153, Art. no. 106498, 2021, doi:10.1016/j.ijfatigue.2021.106498 .
LibreCat: /record/41510
DOI: 10.1016/j.ijfatigue.2021.106498

R. Schemmel, V. Krieger, T. Hemsel, and W. Sextro, “Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization,”https://doi.org/10.1016/j.microrel.2021.114077__Microelectronics Reliability, vol. 119, p. 114077, 2021, doi:https://doi.org/10.1016/j.microrel.2021.114077 .
LibreCat: /record/21436
DOI: https://doi.org/10.1016/j.microrel.2021.114077

D. Han, K. Yang, and G. Meschut, “Mechanical joining of glass fibre reinforced polymer (GFRP) through an innovative solid self-piercing rivet,”10.1016/j.jmatprotec.2021.117182__Journal of Materials Processing Technology, vol. 296, Art. no. 117182, 2021, doi:10.1016/j.jmatprotec.2021.117182 .
LibreCat: /record/37822
DOI: 10.1016/j.jmatprotec.2021.117182

M. S. Rossel, M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes,”10.4028/www.scientific.net/KEM.883.81__in Sheet Metal 2021, 2021, vol. 883, pp. 81–88, doi:10.4028/www.scientific.net/KEM.883.81 .
LibreCat: /record/21811
DOI: 10.4028/www.scientific.net/KEM.883.81

D. Schroder, S. Lange, C. Hangmann, and C. Hedayat, “Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs,” in Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis, 1st ed., Croyton, UK:  The Institution of Engineering and Technology (IET), 2020, pp. 315-346 (32).
LibreCat: /record/21542
DOI: 10.1049/pbcs072e_ch14

C. R. Bielak, M. Böhnke, R. Beck, M. Bobbert, and G. Meschut, “Numerical analysis of the robustness of clinching process considering the pre-forming of the parts ,”https://doi.org/10.1016/j.jajp.2020.100038__Journal of Advanced Joining Processes. , 2020, doi:https://doi.org/10.1016/j.jajp.2020.100038 .
LibreCat: /record/20678
DOI: https://doi.org/10.1016/j.jajp.2020.100038

S. Krauter, D. Rustemovic, and A. Khatibi, “Reduction of required storage capacities for a 100% renewable energy supply in Germany, if new PV systems are installed with east-west tracking systems at increased elevation angles,”10.4229/EUPVSEC20202020-6BV.5.10__in Proceedings of the 37th European Photovoltaic Solar Energy Conference, 07 - 11 September 2020, online, 2020, pp. 1818–1819, doi:10.4229/EUPVSEC20202020-6BV.5.10 .
LibreCat: /record/19390
DOI: 10.4229/EUPVSEC20202020-6BV.5.10

E. Yigitbas, I. Jovanovikj, K. Biermeier, S. Sauer, and G. Engels, “Integrated model-driven development of self-adaptive user interfaces,”10.1007/s10270-020-00777-7__Software and Systems Modeling, vol. 19, no. 5, pp. 1057–1081, 2020, doi:10.1007/s10270-020-00777-7 .
LibreCat: /record/29722
DOI: 10.1007/s10270-020-00777-7

E. Nijholt, B. W. Rink, and S. Schwenker, “Quiver Representations and Dimension Reduction in Dynamical Systems,”10.1137/20m1345670__SIAM Journal on Applied Dynamical Systems, vol. 19, no. 4, pp. 2428–2468, 2020, doi:10.1137/20m1345670 .
LibreCat: /record/33263
DOI: 10.1137/20m1345670
arXiv: 2006.08073

T. Black, “Global generalized solutions to a forager–exploiter model with superlinear degradation and their eventual regularity properties,”10.1142/s0218202520400072__Mathematical Models and Methods in Applied Sciences, vol. 30, no. 06, pp. 1075–1117, 2020, doi:10.1142/s0218202520400072 .
LibreCat: /record/34670
DOI: 10.1142/s0218202520400072

M. Schlichtig, S. A. Opel, L. Budde, and C. Schulte, “Understanding Artificial Intelligence – A Project for the Development of Comprehensive Teaching Material,” in ISSEP 2019 - 12th International conference on informatics in schools: Situation, evaluation and perspectives, Local Proceedings, Lanarca, 2019, vol. 12, pp. 65–73.
LibreCat: /record/15332

H. Opdemom, Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen, vol. 2019,35. Shaker Verlag, 2019.
LibreCat: /record/41958

P. Bornmann, Modellierung und experimentelle Charakterisierung der Wechselwirkung zwischen Ultraschallwandler und Flüssigkeit in kavitationsbasierten Prozessen. Shaker, 2019.
LibreCat: /record/10000

M. Awais, H. Ghasemzadeh Mohammadi, and M. Platzner, “An MCTS-based Framework for Synthesis of Approximate Circuits,” in 26th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC), 2018, pp. 219–224.
LibreCat: /record/10598
DOI: 10.1109/VLSI-SoC.2018.8645026

J. Anderski et al., “Light-responsive nanoparticles based on new polycarbonate polymers as innovative drug delivery systems for photosensitizers in PDT,”10.1016/j.ijpharm.2018.12.040__International Journal of Pharmaceutics, vol. 557, pp. 182–191, 2018, doi:10.1016/j.ijpharm.2018.12.040 .
LibreCat: /record/30935
DOI: 10.1016/j.ijpharm.2018.12.040

S. Sievers, J. Klobucnik, and D. Miersch, Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence. 2017.
LibreCat: /record/20868
DOI: 10.2139/ssrn.2237757

P. Dunst, T. Hemsel, and W. Sextro, “Analysis of pipe vibration in an ultrasonic powder transportationsystem,” elsevier, vol. Sensors and Actuators A 263, pp. 733–736, 2017.
LibreCat: /record/9972

J. Klobucnik, D. Miersch, and S. Sievers, “Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence,” SSRN Electronic Journal, 2017.
LibreCat: /record/5199

S. Althoff, T. Meyer, A. Unger, W. Sextro, and F. Eacock, “Shape-Dependent Transmittable Tangential Force of Wire Bond Tools,” in IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103–2110.
LibreCat: /record/9955
DOI: 10.1109/ECTC.2016.234

G. Polevoy, S. Trajanovski, and M. M. de Weerdt, “Nash Equilibria in Shared Effort Games,” in Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems, 2014, pp. 861–868.
LibreCat: /record/17659

T. C. King et al., “Request Driven Social Sensing,” in Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems, 2014, pp. 1651–1652.
LibreCat: /record/17661