P. Lenz and R. Mahnken, “Multiscale simulation of polymer curing of composites combined mean-field homogenisation methods at large strains,”10.1016/j.ijsolstr.2023.112642__International Journal of Solids and Structures, vol. 290, Art. no. 112642, 2024, doi:10.1016/j.ijsolstr.2023.112642 .

I. Gräßler, D. Wiechel, A.-S. Koch, T. Sturm, and T. Markfelder, “Methodology for Certification-Compliant Effect-Chain Modeling,”10.3390/systems11030154__Systems, vol. 11, no. 3, Art. no. 154, 2023, doi:10.3390/systems11030154 .

C. Link, K. Malena, S. Gausemeier, and A. Trächtler, “Simulation Environment for Traffic Control Systems Targeting Mixed Autonomy Traffic Scenarios,”10.5220/0011987600003479__presented at the 9th International Conference on Vehicle Technology and Intelligent Transport Systems (VEHITS 2023), Prague, Czech Republic, 2023, doi:10.5220/0011987600003479 .

A. Andreiev et al., “Powder bed fusion of soft-magnetic iron-based alloys with high silicon content,”10.1016/j.jmatprotec.2023.117991__Journal of Materials Processing Technology, vol. 317, Art. no. 117991, 2023, doi:10.1016/j.jmatprotec.2023.117991 .

D. Wilke, R. Grothe, L. Bretz, H. Anacker, and R. Dumitrescu, “Lessons Learned from the Introduction of Systems Engineering,”10.3390/systems11030119__Systems, vol. 11, no. 3, Art. no. 119, 2023, doi:10.3390/systems11030119 .

P. Franke, I. Shabanilemraski, M. Schubert, U. Hampel, and E. Y. Kenig, “A new approach to model the fluid dynamics in sandwich packings,”10.1515/cppm-2023-0054__Chemical Product and Process Modeling, vol. 0, no. 0, 2023, doi:10.1515/cppm-2023-0054 .

P. Lenz, P. Kreutzheide, and R. Mahnken, “Multiphase elasto-plastic mean-field homogenisation and its consistent linearisation,”10.1016/j.compstruc.2023.107160__Computers &;amp; Structures, vol. 290, Art. no. 107160, 2023, doi:10.1016/j.compstruc.2023.107160 .

F. Fröde et al., Eds., Large eddy simulation of iron oxide formation in a laboratory spray flame. Elsevier, 2023.

Y. Tao and M. Winkler, “Global smooth solutions in a three-dimensional cross-diffusive SIS epidemic model with saturated taxis at large densities,”10.3934/eect.2023031__Evolution Equations and Control Theory, vol. 12, no. 6, pp. 1676–1687, 2023, doi:10.3934/eect.2023031 .

Y. Tao and M. Winkler, “Small-signal solutions to a nonlocal cross-diffusion model for interaction of scroungers with rapidly diffusing foragers,”10.1142/s0218202523500045__Mathematical Models and Methods in Applied Sciences, vol. 33, no. 01, pp. 103–138, 2023, doi:10.1142/s0218202523500045 .

S. B. Schneider, S. Werner, R. Khalili, A. Hecker, and H. Karl, “mobile-env: An Open Platform for Reinforcement Learning in Wireless Mobile Networks,” presented at the IEEE/IFIP Network Operations and Management Symposium (NOMS), Budapest, 2022.

J. Holtmann, J. Deantoni, and M. Fockel, “Early timing analysis based on scenario requirements and platform models,”10.1007/s10270-022-01002-3__Software and Systems Modeling, 2022, doi:10.1007/s10270-022-01002-3 .

S. Lange, C. Hedayat, H. Kuhn, and U. Hilleringmann, “Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings,”10.1109/ssi56489.2022.9901416__presented at the 2022 Smart Systems Integration (SSI), Grenoble, France, 2022, doi:10.1109/ssi56489.2022.9901416 .

S. A. Bernemann, J. Makowiak, J. Makowiak, R. Bertling, N. Lutters, and E. Kenig, “Development of an innovative separation unit for nitrogen recovery from agricultural waste,” presented at the ACHEMA Congress, Frankfurt am Main, 2022.

Y. Shi, S. Harzheim, M. Hofmann, and T. Wallmersperger, “A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement,” in Material Modeling and Structural Mechanics, Cham: Springer International Publishing, 2022.

M. Protte, R. Fahr, and D. E. Quevedo, “Behavioral Economics for Human-in-the-Loop Control Systems Design: Overconfidence and the Hot Hand Fallacy,”10.1109/mcs.2020.3019723__IEEE Control Systems, vol. 40, no. 6, pp. 57–76, 2022, doi:10.1109/mcs.2020.3019723 .

T. Black and M. Winkler, “Global weak solutions and absorbing sets in a chemotaxis-Navier–Stokes system with prescribed signal concentration on the boundary,”10.1142/s021820252250004x__Mathematical Models and Methods in Applied Sciences, vol. 32, no. 01, pp. 137–173, 2022, doi:10.1142/s021820252250004x .

L. Simo Kamga, D. Meffert, B. Magyar, M. Oehler, and B. Sauer, “Simulative investigation of the influence of surface texturing on the elastohydrodynamic lubrication in chain joints,”https://doi.org/10.1016/j.triboint.2022.107564__Tribology International, vol. 171, p. 107564, 2022, doi:https://doi.org/10.1016/j.triboint.2022.107564 .

M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi:10.1016/j.ijfatigue.2022.107235 .

M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi:10.1016/j.ijfatigue.2022.107235 .

H. Garcke, B. Kovács, and D. Trautwein, “Viscoelastic Cahn–Hilliard models for tumor growth,”10.1142/s0218202522500634__Mathematical Models and Methods in Applied Sciences, vol. 32, no. 13, pp. 2673–2758, 2022, doi:10.1142/s0218202522500634 .

N. Bellomo, N. Outada, J. Soler, Y. Tao, and M. Winkler, “Chemotaxis and cross-diffusion models in complex environments: Models and analytic problems toward a multiscale vision,”10.1142/s0218202522500166__Mathematical Models and Methods in Applied Sciences, vol. 32, no. 04, pp. 713–792, 2022, doi:10.1142/s0218202522500166 .

P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, vol. 22. Düren: Shaker Verlag GmbH, 2021.

J. Kessler, F. Calcavecchia, and T. Kühne, “Artificial Neural Networks as Trial Wave Functions for Quantum Monte Carlo,”10.1002/adts.202000269__Advanced Theory and Simulations, vol. 4, no. 4, Art. no. 2000269, 2021, doi:10.1002/adts.202000269 .

M. Schulze Darup, A. B. Alexandru, D. E. Quevedo, and G. J. Pappas, “Encrypted Control for Networked Systems: An Illustrative Introduction and Current Challenges,”10.1109/mcs.2021.3062956__IEEE Control Systems, vol. 41, no. 3, pp. 58–78, 2021, doi:10.1109/mcs.2021.3062956 .

C. Cheng et al., “Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure,”10.1016/j.compositesb.2021.109209__Composites Part B: Engineering, vol. 224, Art. no. 109209, 2021, doi:10.1016/j.compositesb.2021.109209 .

K. Malena, C. Link, S. Mertin, S. Gausemeier, and A. Trächtler, “Online State Estimation for Microscopic Traffic Simulations using Multiple Data Sources*,” in VEHITS 2021 Proceedings of the 7th International Conference on Vehicle Technology and Intelligent Transport Systems, Online Streaming, 2021, vol. 7, pp. 386–395.

S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,”10.1016/j.ijfatigue.2021.106498__International Journal of Fatigue, vol. 153, Art. no. 106498, 2021, doi:10.1016/j.ijfatigue.2021.106498 .

R. Schemmel, V. Krieger, T. Hemsel, and W. Sextro, “Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization,”https://doi.org/10.1016/j.microrel.2021.114077__Microelectronics Reliability, vol. 119, p. 114077, 2021, doi:https://doi.org/10.1016/j.microrel.2021.114077 .

D. Han, K. Yang, and G. Meschut, “Mechanical joining of glass fibre reinforced polymer (GFRP) through an innovative solid self-piercing rivet,”10.1016/j.jmatprotec.2021.117182__Journal of Materials Processing Technology, vol. 296, Art. no. 117182, 2021, doi:10.1016/j.jmatprotec.2021.117182 .

M. S. Rossel, M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes,”10.4028/www.scientific.net/KEM.883.81__in Sheet Metal 2021, 2021, vol. 883, pp. 81–88, doi:10.4028/www.scientific.net/KEM.883.81 .

D. Schroder, S. Lange, C. Hangmann, and C. Hedayat, “Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs,” in Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis, 1st ed., Croyton, UK:  The Institution of Engineering and Technology (IET), 2020, pp. 315-346 (32).

C. R. Bielak, M. Böhnke, R. Beck, M. Bobbert, and G. Meschut, “Numerical analysis of the robustness of clinching process considering the pre-forming of the parts ,”https://doi.org/10.1016/j.jajp.2020.100038__Journal of Advanced Joining Processes. , 2020, doi:https://doi.org/10.1016/j.jajp.2020.100038 .

S. Krauter, D. Rustemovic, and A. Khatibi, “Reduction of required storage capacities for a 100% renewable energy supply in Germany, if new PV systems are installed with east-west tracking systems at increased elevation angles,”10.4229/EUPVSEC20202020-6BV.5.10__in Proceedings of the 37th European Photovoltaic Solar Energy Conference, 07 - 11 September 2020, online, 2020, pp. 1818–1819, doi:10.4229/EUPVSEC20202020-6BV.5.10 .

E. Yigitbas, I. Jovanovikj, K. Biermeier, S. Sauer, and G. Engels, “Integrated model-driven development of self-adaptive user interfaces,”10.1007/s10270-020-00777-7__Software and Systems Modeling, vol. 19, no. 5, pp. 1057–1081, 2020, doi:10.1007/s10270-020-00777-7 .

E. Nijholt, B. W. Rink, and S. Schwenker, “Quiver Representations and Dimension Reduction in Dynamical Systems,”10.1137/20m1345670__SIAM Journal on Applied Dynamical Systems, vol. 19, no. 4, pp. 2428–2468, 2020, doi:10.1137/20m1345670 .

T. Black, “Global generalized solutions to a forager–exploiter model with superlinear degradation and their eventual regularity properties,”10.1142/s0218202520400072__Mathematical Models and Methods in Applied Sciences, vol. 30, no. 06, pp. 1075–1117, 2020, doi:10.1142/s0218202520400072 .

M. Schlichtig, S. A. Opel, L. Budde, and C. Schulte, “Understanding Artificial Intelligence – A Project for the Development of Comprehensive Teaching Material,” in ISSEP 2019 - 12th International conference on informatics in schools: Situation, evaluation and perspectives, Local Proceedings, Lanarca, 2019, vol. 12, pp. 65–73.

P. Bornmann, Modellierung und experimentelle Charakterisierung der Wechselwirkung zwischen Ultraschallwandler und Flüssigkeit in kavitationsbasierten Prozessen. Shaker, 2019.

M. Awais, H. Ghasemzadeh Mohammadi, and M. Platzner, “An MCTS-based Framework for Synthesis of Approximate Circuits,” in 26th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC), 2018, pp. 219–224.

S. Sievers, J. Klobucnik, and D. Miersch, Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence. 2017.

P. Dunst, T. Hemsel, and W. Sextro, “Analysis of pipe vibration in an ultrasonic powder transportationsystem,” elsevier, vol. Sensors and Actuators A 263, pp. 733–736, 2017.

J. Klobucnik, D. Miersch, and S. Sievers, “Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence,” SSRN Electronic Journal, 2017.

S. Althoff, T. Meyer, A. Unger, W. Sextro, and F. Eacock, “Shape-Dependent Transmittable Tangential Force of Wire Bond Tools,” in IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103–2110.

G. Polevoy, S. Trajanovski, and M. M. de Weerdt, “Nash Equilibria in Shared Effort Games,” in Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems, 2014, pp. 861–868.

T. C. King et al., “Request Driven Social Sensing,” in Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems, 2014, pp. 1651–1652.

D. Frölich, B. Magyar, and B. Sauer, “A comprehensive model of wear, friction and contact temperature in radial shaft seals,”https://doi.org/10.1016/j.wear.2013.12.030__Wear, vol. 311, no. 1, pp. 71–80, 2014, doi:https://doi.org/10.1016/j.wear.2013.12.030 .

M. Hunstig, T. Hemsel, and W. Sextro, “An efficient simulation technique for high-frequency piezoelectric inertia motors,” in Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 277–280.

J. Karátson and B. Kovács, “Variable preconditioning in complex Hilbert space and its application to the nonlinear Schrödinger equation,”10.1016/j.camwa.2012.04.021__Computers &;amp; Mathematics with Applications, vol. 65, no. 3, pp. 449–459, 2012, doi:10.1016/j.camwa.2012.04.021 .

N. Kretzschmar and V. Schöppner, “Simulating Tightly Intermeshing, Co-Rotating Twin Screw Extruders with SIGMA,” in Proceedings of the 2010 Summer Computer Simulation Conference, 2010, pp. 133–140.

R. Maiterth, H. Houben, W. Broekelschen, J. Müller, and C. Sureth-Sloane, “Mikroanalytische Begleitung der Steuerpolitik am Beispiel der Erbschaftsteuerreform,” Statistik und Wissenschaft, pp. 163--183, 2009.

H. Zabel, W. Müller, and A. Gerstlauer, “Accurate RTOS Modelling and Analysis with SystemC,” in Hardware Dependent Software - Principles and Practice, W. Ecker, W. Müller, and R. Dömer, Eds. Dordrecht: Springer Verlag, 2009, pp. 233–260.

A.-L. Vollmer et al., “People modify their tutoring behavior in robot-directed interaction for action learning,”10.1109/DEVLRN.2009.5175516__in Development and Learning, 2009. ICDL 2009. IEEE 8th International Conference on Development and Learning, 2009, pp. 1–6, doi:10.1109/DEVLRN.2009.5175516 .

H. Zabel and W. Müller, “An Efficient Time Annotation Technique in Abstract RTOS Simulations for Multiprocessor Task Migration,”10.1007/978-0-387-09661-2_18__vol. 271. Springer Verlag, Dordrecht, 2008, doi:10.1007/978-0-387-09661-2_18 .

R. Enzler, C. Plessl, and M. Platzner, “System-level performance evaluation of reconfigurable processors,” Microprocessors and Microsystems, vol. 29, no. 2–3, pp. 63–73, 2005.

R. Enzler, C. Plessl, and M. Platzner, “Co-simulation of a Hybrid Multi-Context Architecture,” in Proc. Int. Conf. on Engineering of Reconfigurable Systems and Algorithms (ERSA), 2003, pp. 174–180.

R. Mahnken, D. Tikhomirov, and E. Stein, “Implicit integration scheme and its consistent linearization for an elastoplastic-damage model with application to concrete,”10.1016/s0045-7949(99)00089-9__Computers &;amp; Structures, vol. 75, no. 2, pp. 135–143, 2002, doi:10.1016/s0045-7949(99)00089-9 .

R. Mahnken, “Improved implementation of an algorithm for non-linear isotropic/kinematic hardening in elastoplasticity,”10.1002/(sici)1099-0887(199910)15:10&#60;745::aid-cnm288&#62;3.0.co;2-r__Communications in Numerical Methods in Engineering, vol. 15, no. 10, pp. 745–754, 2002, doi:10.1002/(sici)1099-0887(199910)15:10&#60;745::aid-cnm288&#62;3.0.co;2-r .

R. Mahnken, “A comprehensive study of a multiplicative elastoplasticity model coupled to damage including parameter identification,”10.1016/s0045-7949(98)00296-x__Computers &;amp; Structures, vol. 74, no. 2, pp. 179–200, 2002, doi:10.1016/s0045-7949(98)00296-x .

R. Mahnken and E. Stein, “The identification of parameters for visco-plastic models via finite-element methods and gradient methods,”10.1088/0965-0393/2/3a/013__Modelling and Simulation in Materials Science and Engineering, vol. 2, no. 3A, pp. 597–616, 2002, doi:10.1088/0965-0393/2/3a/013 .

E. Börger, U. Glässer, and W. Müller, “A Formal Definition of an Abstract VHDL’93 Simulator by EA-Machines,” in Semantics of VHDL, C. Delgado Kloos and P. T. Breuer, Eds. Dordrecht: Kluwer Academic Publishers, 1995, pp. 107–139.

R. Lasser and M. Rösler, “Linear mean estimation of weakly stationary stochastic processes under the aspects of optimality and asymptotic optimality,”10.1016/0304-4149(91)90095-t__Stochastic Processes and their Applications, vol. 38, no. 2, pp. 279–293, 1991, doi:10.1016/0304-4149(91)90095-t .