Ahmed, Qazi Arbab, et al. “Post-Configuration Activation of Hardware Trojans in FPGAs.”10.1007/s41635-024-00147-5__Journal of Hardware and Systems Security, Springer Science and Business Media LLC, 2024, doi:10.1007/s41635-024-00147-5.

Hölsch, Lukas, et al. “Insights and Challenges of Co-Simulation-Based Optimal Pulse Pattern Evaluation for Electric Drives.”10.1109/tec.2024.3374962__IEEE Transactions on Energy Conversion, Institute of Electrical and Electronics Engineers (IEEE), 2024, pp. 1–12, doi:10.1109/tec.2024.3374962.

Schlosser, Florian, et al. “Break-Even of High-Temperature Heat Pump Integration for Milk Spray Drying.”10.1016/j.enconman.2023.117304__Energy Conversion and Management, vol. 291, 117304, Elsevier BV, 2023, doi:10.1016/j.enconman.2023.117304.

Divkovic, Denis, et al. “Design Approach to Extend and Decarbonise Existing District Heating Systems - Case Study for German Cities.”10.54337/ijsepm.7655__International Journal of Sustainable Energy Planning and Management, vol. 38, Aalborg University, 2023, pp. 141–56, doi:10.54337/ijsepm.7655.

Pfeifer, Florian, et al. “Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes.”10.13044/j.sdewes.d11.0450__Journal of Sustainable Development of Energy, Water and Environment Systems, vol. 11, no. 3, SDEWES Centre, 2023, pp. 1–20, doi:10.13044/j.sdewes.d11.0450.

Knorr, Lukas, et al. “Assessment of Energy Efficiency and Flexibility Measures in Electrified Process Heat Generation Based on Simulations in the Animal Feed Industry.”10.13044/j.sdewes.d11.0444__Journal of Sustainable Development of Energy, Water and Environment Systems, vol. 11, no. 3, SDEWES Centre, 2023, pp. 0–0, doi:10.13044/j.sdewes.d11.0444.

Ebersold, Felix, et al. “Carbon Insetting as a Measure to Raise Supply Chain Energy Efficiency Potentials: Opportunities and Challenges.”10.1016/j.ecmx.2023.100504__Energy Conversion and Management: X, vol. 20, 100504, Elsevier BV, 2023, doi:10.1016/j.ecmx.2023.100504.

Robaszkiewicz, Maria Anna. “Life, Theory, and Group Identity in Hannah Arendt’s Thought.”10.5840/arendtstudies2023756__Arendt Studies, vol. 7, Philosophy Documentation Center, 2023, pp. 247–52, doi:10.5840/arendtstudies2023756.

Kasper, Tina, and Nils Hansen. “Resonance Enhanced Multiphoton Ionization Detection of Aromatics Formation in Fuel-Rich Flames.”10.1016/j.combustflame.2023.112820__Combustion and Flame, vol. 257, 112820, Elsevier BV, 2023, doi:10.1016/j.combustflame.2023.112820.

Kasse, Robert M., et al. “Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries.”10.1021/acsaem.2c00806__ACS Applied Energy Materials, vol. 5, no. 7, American Chemical Society (ACS), 2022, pp. 8273–81, doi:10.1021/acsaem.2c00806.

Shaqiri, S., et al. “Experimental Investigation of the Pressure Dependence of Iso-Octane Combustion.”10.3389/fenrg.2022.859112__Frontiers in Energy Research, vol. 10, Frontiers Media SA, 2022, doi:10.3389/fenrg.2022.859112.

Hoener, Martin, and Tina Kasper. “Nitrous Acid in High-Pressure Oxidation of C Doped with Nitric Oxide: Challenges in the Isomer-Selective Detection and Quantification of an Elusive Intermediate.”10.1016/j.combustflame.2022.112096__Combustion and Flame, vol. 243, 112096, Elsevier BV, 2022, doi:10.1016/j.combustflame.2022.112096.

Rodríguez-Gómez, Alberto, et al. “Efficient Ethanol Electro-Reforming on Bimetallic Anodes Supported on Adenine-Based Noble Carbons: Hydrogen Production and Value-Added Chemicals.”10.1016/j.mtener.2022.101231__Materials Today Energy, vol. 32, 101231, Elsevier BV, 2022, doi:10.1016/j.mtener.2022.101231.

Weiß, Deborah, and Britta Schramm. “Fracture Mechanical Investigation of Preformed Metal Sheets Using a Novel CC-Specimen.”10.1016/j.prostr.2022.12.111__Procedia Structural Integrity, vol. 42, Elsevier BV, 2022, pp. 879–85, doi:10.1016/j.prostr.2022.12.111.

Lau, S., et al. “Aluminum Diethylphosphinate as a Flame Retardant for Polyethylene: Investigation of the Pyrolysis and Combustion Behavior of PE/AlPi-Mixtures.”10.1016/j.combustflame.2022.112006__Combustion and Flame, vol. 240, 112006, Elsevier BV, 2022, doi:10.1016/j.combustflame.2022.112006.

Weiß, Deborah, et al. “Influence of Plane Mixed-Mode Loading on the Kinking Angle of Clinchable Metal Sheets.”10.1016/j.prostr.2022.03.082__Procedia Structural Integrity, vol. 39, Elsevier BV, 2022, pp. 139–47, doi:10.1016/j.prostr.2022.03.082.

Paul, Andreas, et al. “Impact of Aging on the Energy Efficiency of Household Refrigerating Appliances.”10.1016/j.applthermaleng.2021.117992__Applied Thermal Engineering, vol. 205, 117992, Elsevier BV, 2022, doi:10.1016/j.applthermaleng.2021.117992.

Khider Abbas Abbas, Wameedh, et al. “Experimental Investigation of Organic Rankine Cycle Performance Using Alkanes or Hexamethyldisiloxane as a Working Fluid.”10.1016/j.ecmx.2022.100244__Energy Conversion and Management: X, 100244, Elsevier BV, 2022, doi:10.1016/j.ecmx.2022.100244.

Sundermeier, Stephan, et al. “Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers.”10.3390/ijtpp7020012__International Journal of Turbomachinery, Propulsion and Power, vol. 7, no. 2, 12, MDPI AG, 2022, doi:10.3390/ijtpp7020012.

Hecht, Matthias, et al. “Fatigue Strength of Adhesively Butt-Bonded Hollow Cylinders under Multiaxial Loading with Constant and Variable Amplitudes.”10.1016/j.prostr.2022.03.026__Procedia Structural Integrity, vol. 38, Elsevier BV, 2022, pp. 251–59, doi:10.1016/j.prostr.2022.03.026.