Hempel, Franz, et al. “Comparing Transmission- and Epi-BCARS: A Round Robin on Solid-State Materials.”10.1364/ao.505374__Applied Optics, vol. 63, no. 1, 112, Optica Publishing Group, 2024, doi:10.1364/ao.505374.

Al-Lami, Abbas J. S., and Eugeny Y. Kenig. “New Pressure Drop and Heat Transfer Correlations for Turbulent Forced Convection in Internally Channeled Tube Heat Exchanger Ducts.”10.1016/j.csite.2024.103993__Case Studies in Thermal Engineering, 103993, Elsevier BV, 2024, doi:10.1016/j.csite.2024.103993.

Amiri, Arman, et al. “An Integrated Fuzzy Analytic Network Process and Fuzzy Regression Method for Bitcoin Price Prediction.”10.1016/j.iot.2023.101027__Internet of Things, vol. 25, 101027, Elsevier BV, 2024, doi:10.1016/j.iot.2023.101027.

Niemann, Valerie A., et al. “X-Ray Absorption Spectroscopy Reveals Mechanisms of Calcium and Silicon Fouling on Reverse Osmosis Membranes Used in Wastewater Reclamation.”10.1021/acsestwater.3c00144__ACS ES&;T Water, vol. 3, American Chemical Society (ACS), 2023, pp. 2627–37, doi:10.1021/acsestwater.3c00144.

Duderija, B., et al. “Electropolymerization of Acrylic Acid on Steel for Enhanced Joining by Plastic Deformation.”10.1016/j.jajp.2023.100181__Journal of Advanced Joining Processes, vol. 9, 100181, Elsevier BV, 2023, doi:10.1016/j.jajp.2023.100181.

Tavana, Madjid, et al. “An Interval Multi-Criteria Decision-Making Model for Evaluating Blockchain-IoT Technology in Supply Chain Networks.”10.1016/j.iot.2023.100786__Internet of Things, vol. 22, 100786, Elsevier BV, 2023, doi:10.1016/j.iot.2023.100786.

Kasse, Robert M., et al. “Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries.”10.1021/acsaem.2c00806__ACS Applied Energy Materials, vol. 5, no. 7, American Chemical Society (ACS), 2022, pp. 8273–81, doi:10.1021/acsaem.2c00806.

Harzheim, Sven, et al. “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations.”10.1016/j.jajp.2022.100130__Journal of Advanced Joining Processes, vol. 6, 100130, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100130.

Gerritzen, Johannes, et al. “A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters.”10.3390/jcs6100318__Journal of Composites Science, vol. 6, no. 10, 318, MDPI AG, 2022, doi:10.3390/jcs6100318.

Butzhammer, Lorenz, et al. “Calibration of 3D Scan Trajectories for an Industrial Computed Tomography Setup with 6-DOF Object Manipulator System Using a Single Sphere.”10.1088/1361-6501/ac9856__Measurement Science and Technology, vol. 34, no. 1, 015403, IOP Publishing, 2022, doi:10.1088/1361-6501/ac9856.