Hempel, Franz, et al. “Comparing Transmission- and Epi-BCARS: A Round Robin on Solid-State Materials.”10.1364/ao.505374__Applied Optics, vol. 63, no. 1, 112, Optica Publishing Group, 2024, doi:10.1364/ao.505374.

Al-Lami, Abbas J. S., and Eugeny Y. Kenig. “New Pressure Drop and Heat Transfer Correlations for Turbulent Forced Convection in Internally Channeled Tube Heat Exchanger Ducts.”10.1016/j.csite.2024.103993__Case Studies in Thermal Engineering, 103993, Elsevier BV, 2024, doi:10.1016/j.csite.2024.103993.

Amiri, Arman, et al. “An Integrated Fuzzy Analytic Network Process and Fuzzy Regression Method for Bitcoin Price Prediction.”10.1016/j.iot.2023.101027__Internet of Things, vol. 25, 101027, Elsevier BV, 2024, doi:10.1016/j.iot.2023.101027.

Niemann, Valerie A., et al. “X-Ray Absorption Spectroscopy Reveals Mechanisms of Calcium and Silicon Fouling on Reverse Osmosis Membranes Used in Wastewater Reclamation.”10.1021/acsestwater.3c00144__ACS ES&;T Water, vol. 3, American Chemical Society (ACS), 2023, pp. 2627–37, doi:10.1021/acsestwater.3c00144.

Duderija, B., et al. “Electropolymerization of Acrylic Acid on Steel for Enhanced Joining by Plastic Deformation.”10.1016/j.jajp.2023.100181__Journal of Advanced Joining Processes, vol. 9, 100181, Elsevier BV, 2023, doi:10.1016/j.jajp.2023.100181.

Tavana, Madjid, et al. “An Interval Multi-Criteria Decision-Making Model for Evaluating Blockchain-IoT Technology in Supply Chain Networks.”10.1016/j.iot.2023.100786__Internet of Things, vol. 22, 100786, Elsevier BV, 2023, doi:10.1016/j.iot.2023.100786.

Kasse, Robert M., et al. “Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries.”10.1021/acsaem.2c00806__ACS Applied Energy Materials, vol. 5, no. 7, American Chemical Society (ACS), 2022, pp. 8273–81, doi:10.1021/acsaem.2c00806.

Harzheim, Sven, et al. “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations.”10.1016/j.jajp.2022.100130__Journal of Advanced Joining Processes, vol. 6, 100130, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100130.

Gerritzen, Johannes, et al. “A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters.”10.3390/jcs6100318__Journal of Composites Science, vol. 6, no. 10, 318, MDPI AG, 2022, doi:10.3390/jcs6100318.

Butzhammer, Lorenz, et al. “Calibration of 3D Scan Trajectories for an Industrial Computed Tomography Setup with 6-DOF Object Manipulator System Using a Single Sphere.”10.1088/1361-6501/ac9856__Measurement Science and Technology, vol. 34, no. 1, 015403, IOP Publishing, 2022, doi:10.1088/1361-6501/ac9856.

Kaczmarek, D., et al. “Activation Effect of Ozone and DME on the Partial Oxidation of Natural Gas Surrogates and Validation of Pressure-Dependent Ozone Decomposition.”10.1016/j.jaecs.2022.100107__Applications in Energy and Combustion Science, 100107, Elsevier BV, 2022, doi:10.1016/j.jaecs.2022.100107.

Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.

Meschut, G., et al. “Review on Mechanical Joining by Plastic Deformation.”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.”10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, 100135, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100135.

Moritzer, Elmar, et al. “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics.”10.3390/jcs6100321__Journal of Composites Science, vol. 6, no. 10, 321, MDPI AG, 2022, doi:10.3390/jcs6100321.

Wu, Tao, et al. “Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects.”10.3390/jcs6050138__Journal of Composites Science, vol. 6, no. 5, 138, MDPI AG, 2022, doi:10.3390/jcs6050138.

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.”10.1016/j.jajp.2022.100133__Journal of Advanced Joining Processes, vol. 6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.”10.1016/j.jajp.2022.100134__Journal of Advanced Joining Processes, 100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.

Philipo, Godiana Hagile, et al. “Neural Network-Based Demand-Side Management in a Stand-Alone Solar PV-Battery Microgrid Using Load-Shifting and Peak-Clipping.”10.3390/en15145215__Energies, vol. 15, no. 14, 5215, MDPI AG, 2022, doi:10.3390/en15145215.

Philipo, Godiana Hagile, et al. “Neural Network-Based Demand-Side Management in a Stand-Alone Solar PV-Battery Microgrid Using Load-Shifting and Peak-Clipping.”10.3390/en15145215__Energies, vol. 15, no. 14, 5215, MDPI AG, 2022, doi:10.3390/en15145215.

Duderija, B., et al. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.”10.1016/j.jajp.2022.100137__Journal of Advanced Joining Processes, vol. 7, 100137, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100137.

Peters, Ralf, et al. “A Techno-Economic Assessment of Fischer–Tropsch Fuels Based on Syngas from Co-Electrolysis.”10.3390/pr10040699__Processes, vol. 10, no. 4, 699, MDPI AG, 2022, doi:10.3390/pr10040699.

Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.

Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.

Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.

Moritzer, Elmar, and Maximilian Richters. “Injection Molding of Wood-Filled Thermoplastic Polyurethane.”10.3390/jcs5120316__Journal of Composites Science, vol. 5, no. 12, 316, MDPI AG, 2021, doi:10.3390/jcs5120316.

Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.”10.1016/j.addma.2021.102087__Additive Manufacturing, vol. 46, 102087, Elsevier BV, 2021, doi:10.1016/j.addma.2021.102087.

Zhai, Qingfeng, et al. “Carbon-Based Metal-Free Electrocatalysts: Past, Present, and Future.”10.1021/accountsmr.1c00190__Accounts of Materials Research, vol. 2, no. 12, American Chemical Society (ACS), 2021, pp. 1239–50, doi:10.1021/accountsmr.1c00190.

Köhler, D., et al. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”10.1016/j.jajp.2021.100089__Journal of Advanced Joining Processes, vol. 5, 100089, Elsevier BV, 2021, doi:10.1016/j.jajp.2021.100089.

Carcamo, M., et al. “Transfer Function Replacement of Phenomenological Single-Mode Equations in Semiconductor Microcavity Modeling.”10.1364/ao.392014__Applied Optics, vol. 59, no. 22, 2, Optica Publishing Group, 2020, doi:10.1364/ao.392014.

Köhler, Daniel, et al. “Clinching in In-Situ CT—A Numerical Study on Suitable Tool Materials.”10.1016/j.jajp.2020.100034__Journal of Advanced Joining Processes, vol. 2, 100034, Elsevier BV, 2020, doi:10.1016/j.jajp.2020.100034.

Pannok, Maik, et al. “Transformable Decentral Production for Local Economies with Minimized Carbon Footprint.”10.1002/cben.202000008__ChemBioEng Reviews, vol. 7, no. 6, Wiley, 2020, pp. 216–28, doi:10.1002/cben.202000008.

Oketch, Peter Obara, et al. “Thermographic Phosphor Heat Flux Measurements of Laminar Methane/Air Flame Impinging on a Cylindrical Surface.”10.1088/1361-6501/ab217e__Measurement Science and Technology, vol. 30, no. 9, 094003, IOP Publishing, 2019, doi:10.1088/1361-6501/ab217e.

Xie, Zhenda, et al. “Efficient C-Band Single-Photon Upconversion with Chip-Scale Ti-Indiffused Pp-LiNbO<sub>3</sub> Waveguides.”10.1364/ao.58.005910__Applied Optics, vol. 58, no. 22, 5910, The Optical Society, 2019, doi:10.1364/ao.58.005910.

Stegehake, Carolin, et al. “Modeling and Validating FixedBed Reactors: A StateoftheArt Review.”10.1002/cben.201900002__ChemBioEng Reviews, vol. 6, no. 2, Wiley, 2019, pp. 28–44, doi:10.1002/cben.201900002.

Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.”10.1016/j.addma.2016.11.006__Additive Manufacturing, vol. 13, Elsevier BV, 2016, pp. 93–102, doi:10.1016/j.addma.2016.11.006.

Werner, Thomas, and Nils Tenhumberg. “Synthesis of Cyclic Carbonates from Epoxides and CO2 Catalyzed by Potassium Iodide and Amino Alcohols.”10.1016/j.jcou.2014.04.002__Journal of CO2 Utilization, vol. 7, Elsevier BV, 2014, pp. 39–45, doi:10.1016/j.jcou.2014.04.002.

Lorenz, Alexander, et al. “X-Ray Scattering of Nematic Liquid Crystal Nanodispersion with Negative Dielectric Anisotropy [Invited].”10.1364/ao.52.0000e1__Applied Optics, vol. 52, no. 22, , The Optical Society, 2013, doi:10.1364/ao.52.0000e1.