F. Hempel et al., “Comparing transmission- and epi-BCARS: a round robin on solid-state materials,”10.1364/ao.505374__Applied Optics, vol. 63, no. 1, Art. no. 112, 2024, doi:10.1364/ao.505374 .

A. J. S. Al-Lami and E. Y. Kenig, “New pressure drop and heat transfer correlations for turbulent forced convection in internally channeled tube heat exchanger ducts,”10.1016/j.csite.2024.103993__Case Studies in Thermal Engineering, Art. no. 103993, 2024, doi:10.1016/j.csite.2024.103993 .

A. Amiri, M. Tavana, and H. Arman, “An Integrated Fuzzy Analytic Network Process and Fuzzy Regression Method for Bitcoin Price Prediction,”10.1016/j.iot.2023.101027__Internet of Things, vol. 25, Art. no. 101027, 2024, doi:10.1016/j.iot.2023.101027 .

V. A. Niemann, M. Huck, H.-G. Steinrück, M. F. Toney, W. A. Tarpeh, and S. E. Bone, “X-ray Absorption Spectroscopy Reveals Mechanisms of Calcium and Silicon Fouling on Reverse Osmosis Membranes Used in Wastewater Reclamation,”10.1021/acsestwater.3c00144__ACS ES&;T Water, vol. 3, pp. 2627–2637, 2023, doi:10.1021/acsestwater.3c00144 .

B. Duderija et al., “Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation,”10.1016/j.jajp.2023.100181__Journal of Advanced Joining Processes, vol. 9, Art. no. 100181, 2023, doi:10.1016/j.jajp.2023.100181 .

M. Tavana, A. Khalili Nasr, A. B. Ahmadabadi, A. S. Amiri, and H. Mina, “An interval multi-criteria decision-making model for evaluating blockchain-IoT technology in supply chain networks,”10.1016/j.iot.2023.100786__Internet of Things, vol. 22, Art. no. 100786, 2023, doi:10.1016/j.iot.2023.100786 .

R. M. Kasse et al., “Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries,”10.1021/acsaem.2c00806__ACS Applied Energy Materials, vol. 5, no. 7, pp. 8273–8281, 2022, doi:10.1021/acsaem.2c00806 .

S. Harzheim, L. Ewenz, M. Zimmermann, and T. Wallmersperger, “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations,”10.1016/j.jajp.2022.100130__Journal of Advanced Joining Processes, vol. 6, Art. no. 100130, 2022, doi:10.1016/j.jajp.2022.100130 .

J. Gerritzen, A. Hornig, B. Gröger, and M. Gude, “A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters,”10.3390/jcs6100318__Journal of Composites Science, vol. 6, no. 10, Art. no. 318, 2022, doi:10.3390/jcs6100318 .

L. Butzhammer, A. M. Müller, and T. Hausotte, “Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere,”10.1088/1361-6501/ac9856__Measurement Science and Technology, vol. 34, no. 1, Art. no. 015403, 2022, doi:10.1088/1361-6501/ac9856 .

D. Kaczmarek et al., “Activation effect of ozone and DME on the partial oxidation of natural gas surrogates and validation of pressure-dependent ozone decomposition,”10.1016/j.jaecs.2022.100107__Applications in Energy and Combustion Science, Art. no. 100107, 2022, doi:10.1016/j.jaecs.2022.100107 .

G. Meschut et al., “Review on mechanical joining by plastic deformation,”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi:10.1016/j.jajp.2022.100113 .

G. Meschut et al., “Review on mechanical joining by plastic deformation,”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi:10.1016/j.jajp.2022.100113 .

B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase,”10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, Art. no. 100135, 2022, doi:10.1016/j.jajp.2022.100135 .

E. Moritzer, F. Flachmann, M. Richters, and M. Neugebauer, “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics,”10.3390/jcs6100321__Journal of Composites Science, vol. 6, no. 10, Art. no. 321, 2022, doi:10.3390/jcs6100321 .

T. Wu et al., “Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects,”10.3390/jcs6050138__Journal of Composites Science, vol. 6, no. 5, Art. no. 138, 2022, doi:10.3390/jcs6050138 .

B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase,”10.1016/j.jajp.2022.100133__Journal of Advanced Joining Processes, vol. 6, Art. no. 100133, 2022, doi:10.1016/j.jajp.2022.100133 .

B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process,”10.1016/j.jajp.2022.100134__Journal of Advanced Joining Processes, Art. no. 100134, 2022, doi:10.1016/j.jajp.2022.100134 .

G. H. Philipo, J. N. Kakande, and S. Krauter, “Neural Network-Based Demand-Side Management in a Stand-Alone Solar PV-Battery Microgrid Using Load-Shifting and Peak-Clipping,”10.3390/en15145215__Energies, vol. 15, no. 14, Art. no. 5215, 2022, doi:10.3390/en15145215 .

G. H. Philipo, J. N. Kakande, and S. Krauter, “Neural Network-Based Demand-Side Management in a Stand-Alone Solar PV-Battery Microgrid Using Load-Shifting and Peak-Clipping,”10.3390/en15145215__Energies, vol. 15, no. 14, Art. no. 5215, 2022, doi:10.3390/en15145215 .