An alternative and robust formulation of the fatigue crack growth rate curve for long cracks
G. Kullmer, D. Weiß, B. Schramm, Engineering Fracture Mechanics 296 (2024).

Multiscale simulation of polymer curing of composites combined mean-field homogenisation methods at large strains
P. Lenz, R. Mahnken, International Journal of Solids and Structures 290 (2024).

Insights into the First Multi-Transition-Metal Containing Ruddlesden Popper-Type Cathode for all-solid-state Fluoride Ion Batteries
V. Vanita, A.I. Waidha, S. Vasala, P. Puphal, R. Schoch, P. Glatzel, M. Bauer, O. Clemens, Journal of Materials Chemistry A (2024).

Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion
D. Milaege, N. Eschemann, K.-P. Hoyer, M. Schaper, Crystals 14 (2024).

Development of a numerical simulation model for self-piercing riveting of additive manufactured AlSi10Mg
P. Heyser, R. Petker, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2023).

Characterizing Ion Transport in Electrolytes via Concentration and Velocity Profiles
A. Mistry, V. Srinivasan, H.-G. Steinrück, Advanced Energy Materials 13 (2023) 2203690.

Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete
S. Josch, S. Jesinghausen, H.-J. Schmid, Applied Rheology 33 (2023).

Stability of DNA Origami Nanostructures in Physiological Media: The Role of Molecular Interactions
V. Linko, A. Keller, Small (2023).

Compact Metasurface-Based Optical Pulse-Shaping Device
R. Geromel, P. Georgi, M. Protte, S. Lei, T. Bartley, L. Huang, T. Zentgraf, Nano Letters 23 (2023) 3196–3201.

Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709
S. Gnaase, D. Niggemeyer, D. Lehnert, C. Bödger, T. Tröster, Crystals 13 (2023).

Engineering SubNanometer HafniaBased Ferroelectric to Break The Scaling Relation for HighEfficiency Piezocatalytic Water Splitting
R. Su, J. Zhang, V. Wong, D. Zhang, Y. Yang, Z. Luo, X. Wang, H. Wen, Y. Liu, J. Seidel, X. Yang, Y. Pan, F. Li, Advanced Materials (2023).

Cation-dependent assembly of hexagonal DNA origami lattices on SiO2 surfaces
B.K. Pothineni, G. Grundmeier, A. Keller, Nanoscale (2023).

Steady-State Error Compensation for Reinforcement Learning-Based Control of Power Electronic Systems
D. Weber, M. Schenke, O. Wallscheid, IEEE Access 11 (2023) 76524–76536.

Modeling of Masked Droplet Deposition for Site-Controlled Ga Droplets
S. Feddersen, V. Zolatanosha, A. Alshaikh, D. Reuter, C. Heyn, Nanomaterials 13 (2023).

An Experimental and Computational Modeling Study on Additively Manufactured MicroArchitectured Ti–24Nb–4Zr–8Sn HollowStrut Lattice Structures
S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, K.-P. Hoyer, Advanced Engineering Materials 25 (2023).

NELLIE: Never-Ending Linking for Linked Open Data
A.F. Ahmed, M.A. Sherif, A.-C.N. Ngomo, IEEE Access (2023) 1–1.

Overcoming the Miscibility Gap of GaN/InN in MBE Growth of Cubic In<sub><i>x</i></sub>Ga<sub>1–<i>x</i></sub>N
M.F. Zscherp, S.A. Jentsch, M.J. Müller, V. Lider, C. Becker, L. Chen, M. Littmann, F. Meier, A. Beyer, D.M. Hofmann, D.J. As, P.J. Klar, K. Volz, S. Chatterjee, J. Schörmann, ACS Applied Materials &;amp; Interfaces 15 (2023) 39513–39522.

Superstructure-dependent stability of DNA origami nanostructures in the presence of chaotropic denaturants
M. Hanke, D. Dornbusch, E. Tomm, G. Grundmeier, K. Fahmy, A. Keller, Nanoscale (2023).

Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology
T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, T. Tröster, International Journal of Material Forming 16 (2023).

Impact of 3D Curvature on the Polarization Orientation in Non-Ising Domain Walls
U. Acevedo-Salas, B. Croes, Y. Zhang, O. Cregut, K.D. Dorkenoo, B. Kirbus, E. Singh, H. Beccard, M. Rüsing, L.M. Eng, R. Hertel, E.A. Eliseev, A.N. Morozovska, S. Cherifi-Hertel, Nano Letters 23 (2023) 795–803.

Vibrational properties of LiNbO3 and LiTaO3 under uniaxial stress
E. Singh, M.N. Pionteck, S. Reitzig, M. Lange, M. Rüsing, L.M. Eng, S. Sanna, Physical Review Materials 7 (2023).

Thermophoretic Analysis of Biomolecules across the Nanoscales in Self-Assembled Polymeric Matrices
P. Liu, N. Schumann, F. Abele, F. Ren, M. Hanke, Y. Xin, A. Hartmann, M. Schlierf, A. Keller, W. Lin, Y. Zhang, ACS Applied Nano Materials (2023).

Vibrational Properties of the Potassium Titanyl Phosphate Crystal Family
S. Neufeld, U. Gerstmann, L. Padberg, C. Eigner, G. Berth, C. Silberhorn, L.M. Eng, W.G. Schmidt, M. Rüsing, Crystals 13 (2023).

Multiphase elasto-plastic mean-field homogenisation and its consistent linearisation
P. Lenz, P. Kreutzheide, R. Mahnken, Computers &;amp; Structures 290 (2023).

Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24NZSn Biomedical Stents: A Combined Experimental and Computational Modelling Approach
S. Pramanik, D. Milaege, M. Hein, K.-P. Hoyer, M. Schaper, Crystals 13 (2023).

Luminescent DNA-origami nano-rods dispersed in a lyotropic chromonic liquid crystal
B. Zhang, L. Nguyen, K. Martens, A. Heuer-Jungemann, J. Philipp, S. Kempter, J.O. Rädler, T. Liedl, H.-S. Kitzerow, Liquid Crystals 50 (2023) 1243–1251.

Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security
I. Gräßler, E. Bodden, D. Wiechel, J. Pottebaum, Konstruktion 75 (2023) 60–65.

Spectral and Energy Efficiency Maximization of MISO STAR-RIS-Assisted URLLC Systems
M. Soleymani, I. Santamaria, E.A. Jorswieck, IEEE Access 11 (2023) 70833–70852.

Influence of thermomechanical processing on the microstructural and mechanical properties of steel 22Mn
A. Reitz, O. Grydin, M. Schaper, Materials Science and Engineering: A 838 (2022).

Efficient Frequency Conversion with Geometric Phase Control in Optical Metasurfaces
B. Reineke Matsudo, B. Sain, L. Carletti, X. Zhang, W. Gao, C. Angelis, L. Huang, T. Zentgraf, Advanced Science 9 (2022).

Consideration of the manufacturing history of sheet metal components for the adaptation of a clinching process
P. Heyser, S. Wiesenmayer, P. Frey, T. Nehls, C. Scharr, W. Flügge, M. Merklein, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).

EnvironmentDependent Stability and Mechanical Properties of DNA Origami SixHelix Bundles with Different Crossover Spacings
Y. Xin, P. Piskunen, A. Suma, C. Li, H. Ijäs, S. Ojasalo, I. Seitz, M.A. Kostiainen, G. Grundmeier, V. Linko, A. Keller, Small 18 (2022) 2107393.

Effect of Surface Hydrophobicity on the Adsorption of a Pilus-Derived Adhesin-like Peptide
Y. Yang, J. Huang, D. Dornbusch, G. Grundmeier, K. Fahmy, A. Keller, D.L. Cheung, Langmuir 38 (2022) 9257–9265.

Multimodal quantification of degradation pathways during extreme fast charging of lithium-ion batteries
E.J. McShane, P.P. Paul, T.R. Tanim, C. Cao, H.-G. Steinrück, V. Thampy, S.E. Trask, A.R. Dunlop, A.N. Jansen, E.J. Dufek, M.F. Toney, J.N. Weker, B.D. McCloskey, Journal of Materials Chemistry A 10 (2022) 23927–23939.

Simultaneous neutron and X-ray tomography for visualization of graphite electrode degradation in fast-charged lithium-ion batteries
M. Yusuf, J.M. LaManna, P.P. Paul, D.N. Agyeman-Budu, C. Cao, A.R. Dunlop, A.N. Jansen, B.J. Polzin, S.E. Trask, T.R. Tanim, E.J. Dufek, V. Thampy, H.-G. Steinrück, M.F. Toney, J. Nelson Weker, Cell Reports Physical Science 3 (2022) 101145.

Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).

Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing
D. Römisch, M. Kraus, M. Merklein, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236 (2022) 1187–1202.

Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures
J. Popp, D. Römisch, M. Merklein, D. Drummer, Applied Sciences 12 (2022).

Enhanced corrosion resistance of epoxy-films on ultra-thin SiOx PECVD film coated laser surface melted Al-alloys
J. Varghese, P. Vieth, X. Xie, G. Grundmeier, SN Applied Sciences 5 (2022).

In-Mold-Assembly of Hybrid Bending Structures by Compression Molding
T. Stallmeister, T. Tröster, Key Engineering Materials 926 (2022) 1457–1467.

Direct visualization of the drug loading of single DNA origami nanostructures by AFM-IR nanospectroscopy
M. Hanke, G. Grundmeier, A. Keller, Nanoscale 14 (2022) 11552–11560.

Real-Space Identification of Non-Noble Single Atomic Catalytic Sites within Metal-Coordinated Supramolecular Networks
B. Schulze Lammers, N. López-Salas, J. Stein Siena, H. Mirhosseini, D. Yesilpinar, J.J. Heske, T. Kühne, H. Fuchs, M. Antonietti, H. Mönig, ACS Nano 16 (2022) 14284–14296.

Surface Passivation and Detrimental Heat-Induced Diffusion Effects in RbF-Treated Cu(In,Ga)Se<sub>2</sub> Solar Cell Absorbers
A. Elizabeth, S.K. Sahoo, H. Phirke, T. Kodalle, T. Kühne, J.-N. Audinot, T. Wirtz, A. Redinger, C.A. Kaufmann, H. Mirhosseini, H. Mönig, ACS Applied Materials &;amp; Interfaces 14 (2022) 34101–34112.

Fingerprints Indicating Superior Properties of Internal Interfaces in Cu(In,Ga)Se            <sub>2</sub>            ThinFilm Solar Cells
M. Raghuwanshi, M. Chugh, G. Sozzi, A. Kanevce, T. Kühne, H. Mirhosseini, R. Wuerz, O. CojocaruMirédin, Advanced Materials 34 (2022).

Ni-based electrocatalysts for unconventional CO2 reduction reaction to formic acid
E. Lepre, J.J. Heske, M. Nowakowski, E. Scoppola, I. Zizak, T. Heil, T. Kühne, M. Antonietti, N. López-Salas, J. Albero, Nano Energy 97 (2022).

Giant Orbital Anisotropy with Strong Spin–Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice
S. Kim, S. Pathak, S.H. Rhim, J. Cha, S. Jekal, S.C. Hong, H.H. Lee, S. Park, H. Lee, J. Park, S. Lee, H.-G. Steinrück, A. Mehta, S.X. Wang, J. Hong, Advanced Science 9 (2022) 2201749.

The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints
A.T. Zeuner, L. Ewenz, J. Kalich, S. Schöne, U. Füssel, M. Zimmermann, Metals 12 (2022).

Long-Term Behavior of Clinched Electrical Contacts
J. Kalich, M. Matzke, W. Pfeiffer, S. Schlegel, L. Kornhuber, U. Füssel, Metals 12 (2022).

Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study
B. Gröger, J. Wang, T. Bätzel, A. Hornig, M. Gude, Materials 15 (2022).

Investigations on Combined in situ CT and Acoustic Analysis during Clinching
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Key Engineering Materials, Trans Tech Publications, Ltd., 2022, pp. 1489–1497.

Numerical fatigue life prediction of corroded and non-corroded clinched joints
S. Harzheim, M. Hofmann, T. Wallmersperger, Mechanics of Advanced Materials and Structures (2022) 1–6.

Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Key Engineering Materials 926 (2022) 1516–1526.

Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572.

Ni-based electrocatalysts for unconventional CO2 reduction reaction to formic acid
E. Lepre, J. Heske, M. Nowakowski, E. Scoppola, I. Zizak, T. Heil, T.D. Kühne, M. Antonietti, N. Lopez Salas, J. Albero, Nano Energy 97 (2022).

Synthesis and Characterization of Catalytically Active Au CorePd Shell Nanoparticles Supported on Alumina
Y. Feng, A. Schaefer, A. Hellman, M. Di, H. Härelind, M. Bauer, P.-A. Carlsson, Langmuir 38 (2022) 12859–12870.

Ni-based electrocatalysts for unconventional CO2 reduction reaction to formic acid
E. Lepre, J. Heske, M. Nowakowski, E. Scoppola, I. Zizak, T. Heil, T.D. Kühne, M. Antonietti, N. López-Salas, J. Albero, Nano Energy 97 (2022).

Following carbon condensation by <i>in situ</i> TEM: towards a rational understanding of the processes in the synthesis of nitrogen-doped carbonaceous materials
D. Piankova, J. Kossmann, H. Zschiesche, M. Antonietti, N. Lopez Salas, N.V. Tarakina, Journal of Materials Chemistry A 10 (2022) 25220–25229.

Modulating between 2e<sup></sup> and 4e<sup></sup> pathways in the oxygen reduction reaction with laser-synthesized iron oxide-grafted nitrogen-doped carbon
H. Wang, M. Jerigova, J. Hou, N.V. Tarakina, S. Delacroix, N. Lopez Salas, V. Strauss, Journal of Materials Chemistry A 10 (2022) 24156–24166.

cRed Carbond: A Rediscovered Covalent Crystalline Semiconductor
M. Odziomek, P. Giusto, J. Kossmann, N.V. Tarakina, J. Heske, S.M. Rivadeneira, W. Keil, C. Schmidt, S. Mazzanti, O. Savateev, L. PerdigónToro, D. Neher, T.D. Kühne, M. Antonietti, N. Lopez Salas, Advanced Materials 34 (2022).

Real-Space Identification of Non-Noble Single Atomic Catalytic Sites within Metal-Coordinated Supramolecular Networks
B. Schulze Lammers, N. Lopez Salas, J. Stein Siena, H. Mirhosseini, D. Yesilpinar, J. Heske, T.D. Kühne, H. Fuchs, M. Antonietti, H. Mönig, ACS Nano 16 (2022) 14284–14296.

cRed Carbond: A Rediscovered Covalent Crystalline Semiconductor
M. Odziomek, P. Giusto, J. Kossmann, N.V. Tarakina, J.J. Heske, S.M. Rivadeneira, W. Keil, C. Schmidt, S. Mazzanti, O. Savateev, L. PerdigónToro, D. Neher, T. Kühne, M. Antonietti, N. LópezSalas, Advanced Materials 34 (2022).

The role of sulfonate groups and hydrogen bonding in the proton conductivity of two coordination networks
A. Javed, F. Steinke, S. Wöhlbrandt, H. Bunzen, N. Stock, M. Tiemann, Beilstein Journal of Nanotechnology 13 (2022) 437–443.

Geometric and mechanical joint characterization of conventionally  and tumbled self-piercing riveting joints
S. Wituschek, F. Kappe, G. Meschut, M. Lechner, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).

Helical Polariton Lasing from Topological Valleys in an Organic Crystalline Microcavity
T. Long, X. Ma, J. Ren, F. Li, Q. Liao, S. Schumacher, G. Malpuech, D. Solnyshkov, H. Fu, Advanced Science 9 (2022).

Bound polaron formation in lithium niobate from ab initio molecular dynamics
M. Krenz, U. Gerstmann, W.G. Schmidt, Applied Physics A 128 (2022) 480.

Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants
P. Vieth, T. Borgert, W. Homberg, G. Grundmeier, Advanced Engineering Materials (2022).

Geometric and mechanical joint characterization of conventionally  and tumbled self-piercing riveting joints
S. Wituschek, F. Kappe, G. Meschut, M. Lechner, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).

Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).

Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC)
A. Oesterwinter, C. Wischer, W. Homberg, Metals 12 (2022).

Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints
C. Wischer, W. Homberg, Key Engineering Materials 926 (2022) 1468–1478.

Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations
T.D. Joy, D. Weiß, B. Schramm, G. Kullmer, Applied Sciences 12 (2022).

Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method
G. Kullmer, D. Weiß, B. Schramm, Engineering Fracture Mechanics (2022).

P-Terminated InP(001) Surfaces: Surface Band Bending and Reactivity to Water
D.C. Moritz, I.A. Ruiz Alvarado, M.A. Zare Pour, A. Paszuk, T. Frieß, E. Runge, J.P. Hofmann, T. Hannappel, W.G. Schmidt, W. Jaegermann, ACS Applied Materials &;amp; Interfaces 14 (2022) 47255–47261.

Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically Polarized V<sub>B</sub><sup>–</sup> Spin States in hBN
F.F. Murzakhanov, G.V. Mamin, S.B. Orlinskii, U. Gerstmann, W.G. Schmidt, T. Biktagirov, I. Aharonovich, A. Gottscholl, A. Sperlich, V. Dyakonov, V.A. Soltamov, Nano Letters 22 (2022) 2718–2724.

Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming
F. Dahms, W. Homberg, Key Engineering Materials 926 (2022) 683–689.

Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control
F. Dahms, W. Homberg, Metals 12 (2022).

Fracture mechanical evaluation of the material HX
B. Schramm, D. Weiß, Materials Testing 64 (2022) 1437–1449.

Apparatus for the measurement of the thermodynamic speed of sound of diethylene glycol and triethylene glycol
M.A. Javed, S. Vater, E. Baumhögger, T. Windmann, J. Vrabec, The Journal of Chemical Thermodynamics (2022).

Thermodynamic Properties for 1-Hexene – Measurements and Modeling
B. Betken, R. Beckmüller, M. Ali Javed, E. Baumhögger, R. Span, J. Vrabec, M. Thol, The Journal of Chemical Thermodynamics (2022).

LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio
O. Abdelaal, F. Hengsbach, M. Schaper, K.-P. Hoyer, Materials 15 (2022).

The influence of surface on direction of diffusion in Al-Fe clad material
M. Slapáková, B. Kivská, K. Fekete, R. Králík, O. Grydin, M. Stolbchenko, M. Schaper, Materials Characterization 190 (2022).

Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications
M. Hein, D. Kokalj, N.F. Lopes Dias, D. Stangier, H. Oltmanns, S. Pramanik, M. Kietzmann, K.-P. Hoyer, J. Meißner, W. Tillmann, M. Schaper, Metals 12 (2022).

Influence of thermomechanical processing on the microstructural and mechanical properties of steel 22Mn
A. Reitz, O. Grydin, M. Schaper, Materials Science and Engineering: A 838 (2022).

Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications
W. Tillmann, N.F. Lopes Dias, D. Kokalj, D. Stangier, M. Hein, K.-P. Hoyer, M. Schaper, D. Gödecke, H. Oltmanns, J. Meißner, Materials Letters (2022).

Characterization and analysis of plastic instability in an ultrafinegrained medium Mn TRIP steel
Z. Teng, H. Wu, S. Pramanik, K.-P. Hoyer, M. Schaper, H. Zhang, C. Boller, P. Starke, Advanced Engineering Materials (2022).

Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study
S. Pramanik, D. Milaege, K.-P. Hoyer, M. Schaper, Crystals 12 (2022).

LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio
O. Abdelaal, F. Hengsbach, M. Schaper, K.-P. Hoyer, Materials 15 (2022).

On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy
M. Hein, N.F. Lopes Dias, D. Kokalj, D. Stangier, K.-P. Hoyer, W. Tillmann, M. Schaper, International Journal of Fatigue 166 (2022).

Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications
S. Pramanik, D. Milaege, K.-P. Hoyer, M. Schaper, Materials Science and Engineering: A 854 (2022).

Heat Treatments of Metastable ;2 Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion
M. Hein, N.F. Lopes Dias, S. Pramanik, D. Stangier, K.-P. Hoyer, W. Tillmann, M. Schaper, Materials 15 (2022).

Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications
W. Tillmann, N.F. Lopes Dias, D. Kokalj, D. Stangier, M. Hein, K.-P. Hoyer, M. Schaper, D. Gödecke, H. Oltmanns, J. Meißner, Materials Letters 321 (2022).

Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes
J. Huang, A.G. Orive, J.T. Krüger, K.-P. Hoyer, A. Keller, G. Grundmeier, Corrosion Science 200 (2022) 110186.

Characterization and Analysis of Plastic Instability in an UltrafineGrained Medium Mn TRIP Steel
Z. Teng, H. Wu, S. Pramanik, K.-P. Hoyer, M. Schaper, H. Zhang, C. Boller, P. Starke, Advanced Engineering Materials 24 (2022).

Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes
J. Huang, A. Gonzalez Orive, J.T. Krüger, K.-P. Hoyer, A. Keller, G. Grundmeier, Corrosion Science 200 (2022).

Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate
J.T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, C. Zinn, Advanced Engineering Materials (2022).

Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications
S. Pramanik, D. Milaege, K.-P. Hoyer, M. Schaper, Materials Science and Engineering: A 854 (2022).

Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study
S. Pramanik, D. Milaege, K.-P. Hoyer, M. Schaper, Crystals 12 (2022).

LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio
O. Abdelaal, F. Hengsbach, M. Schaper, K.-P. Hoyer, Materials 15 (2022).

On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy
M. Hein, N.F. Lopes Dias, D. Kokalj, D. Stangier, K.-P. Hoyer, W. Tillmann, M. Schaper, International Journal of Fatigue 166 (2022).

Increasing the accuracy of clinching process simulations by modeling the friction as a function of local joining process parameters
M.S. Rossel, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).