Kullmer, Gunter, et al. “An Alternative and Robust Formulation of the Fatigue Crack Growth Rate Curve for Long Cracks.”10.1016/j.engfracmech.2023.109826__Engineering Fracture Mechanics, vol. 296, 109826, Elsevier BV, 2024, doi:10.1016/j.engfracmech.2023.109826.

Lenz, Peter, and Rolf Mahnken. “Multiscale Simulation of Polymer Curing of Composites Combined Mean-Field Homogenisation Methods at Large Strains.”10.1016/j.ijsolstr.2023.112642__International Journal of Solids and Structures, vol. 290, 112642, Elsevier BV, 2024, doi:10.1016/j.ijsolstr.2023.112642.

Vanita, Vanita, et al. “Insights into the First Multi-Transition-Metal Containing Ruddlesden Popper-Type Cathode for All-Solid-State Fluoride Ion Batteries.”10.1039/d4ta00704b__Journal of Materials Chemistry A, Royal Society of Chemistry (RSC), 2024, doi:10.1039/d4ta00704b.

Milaege, Dennis, et al. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.”10.3390/cryst14020117__Crystals, vol. 14, no. 2, 117, MDPI AG, 2024, doi:10.3390/cryst14020117.

Heyser, Per, et al. “Development of a Numerical Simulation Model for Self-Piercing Riveting of Additive Manufactured AlSi10Mg.”10.1177/14644207231158213__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072311582, SAGE Publications, 2023, doi:10.1177/14644207231158213.

Mistry, Aashutosh, et al. “Characterizing Ion Transport in Electrolytes via Concentration and Velocity Profiles.”10.1002/aenm.202203690__Advanced Energy Materials, vol. 13, Wiley, 2023, p. 2203690, doi:10.1002/aenm.202203690.

Josch, Sebastian, et al. “Development of an Adaptive Coaxial Concrete Rheometer and Rheological Characterisation of Fresh Concrete.”10.1515/arh-2022-0140__Applied Rheology, vol. 33, no. 1, Walter de Gruyter GmbH, 2023, doi:10.1515/arh-2022-0140.

Linko, Veikko, and Adrian Keller. “Stability of DNA Origami Nanostructures in Physiological Media: The Role of Molecular Interactions.”10.1002/smll.202301935__Small, Wiley, 2023, doi:10.1002/smll.202301935.

Geromel, René, et al. “Compact Metasurface-Based Optical Pulse-Shaping Device.”10.1021/acs.nanolett.2c04980__Nano Letters, vol. 23, no. 8, American Chemical Society (ACS), 2023, pp. 3196–201, doi:10.1021/acs.nanolett.2c04980.

Gnaase, Stefan, et al. “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709.”10.3390/cryst13020157__Crystals, vol. 13, no. 2, 157, MDPI AG, 2023, doi:10.3390/cryst13020157.

Su, Ran, et al. “Engineering SubNanometer HafniaBased Ferroelectric to Break The Scaling Relation for HighEfficiency Piezocatalytic Water Splitting.”10.1002/adma.202303018__Advanced Materials, Wiley, 2023, doi:10.1002/adma.202303018.

Pothineni, Bhanu Kiran, et al. “Cation-Dependent Assembly of Hexagonal DNA Origami Lattices on SiO2 Surfaces.”10.1039/d3nr02926c__Nanoscale, Royal Society of Chemistry (RSC), 2023, doi:10.1039/d3nr02926c.

Weber, Daniel, et al. “Steady-State Error Compensation for Reinforcement Learning-Based Control of Power Electronic Systems.”10.1109/access.2023.3297274__IEEE Access, vol. 11, Institute of Electrical and Electronics Engineers (IEEE), 2023, pp. 76524–36, doi:10.1109/access.2023.3297274.

Feddersen, Stefan, et al. “Modeling of Masked Droplet Deposition for Site-Controlled Ga Droplets.”10.3390/nano13030466__Nanomaterials, vol. 13, no. 3, 466, MDPI AG, 2023, doi:10.3390/nano13030466.

Pramanik, Sudipta, et al. “An Experimental and Computational Modeling Study on Additively Manufactured MicroArchitectured Ti–24Nb–4Zr–8Sn HollowStrut Lattice Structures.”10.1002/adem.202201850__Advanced Engineering Materials, vol. 25, no. 14, Wiley, 2023, doi:10.1002/adem.202201850.

Ahmed, Abdullah Fathi, et al. “NELLIE: Never-Ending Linking for Linked Open Data.”10.1109/access.2023.3300694__IEEE Access, Institute of Electrical and Electronics Engineers (IEEE), 2023, pp. 1–1, doi:10.1109/access.2023.3300694.

Zscherp, Mario Fabian, et al. “Overcoming the Miscibility Gap of GaN/InN in MBE Growth of Cubic In<sub>x</sub>Ga<sub>1–x</sub>N.”10.1021/acsami.3c06319__ACS Applied Materials &;amp; Interfaces, vol. 15, no. 33, American Chemical Society (ACS), 2023, pp. 39513–22, doi:10.1021/acsami.3c06319.

Hanke, Marcel, et al. “Superstructure-Dependent Stability of DNA Origami Nanostructures in the Presence of Chaotropic Denaturants.”10.1039/d3nr02045b__Nanoscale, Royal Society of Chemistry (RSC), 2023, doi:10.1039/d3nr02045b.

Borgert, Thomas, et al. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.”10.1007/s12289-023-01785-w__International Journal of Material Forming, vol. 16, no. 6, 59, Springer Science and Business Media LLC, 2023, doi:10.1007/s12289-023-01785-w.

Acevedo-Salas, Ulises, et al. “Impact of 3D Curvature on the Polarization Orientation in Non-Ising Domain Walls.”10.1021/acs.nanolett.2c03579__Nano Letters, vol. 23, no. 3, American Chemical Society (ACS), 2023, pp. 795–803, doi:10.1021/acs.nanolett.2c03579.

Singh, Ekta, et al. “Vibrational Properties of LiNbO3 and LiTaO3 under Uniaxial Stress.”10.1103/physrevmaterials.7.024420__Physical Review Materials, vol. 7, no. 2, 024420, American Physical Society (APS), 2023, doi:10.1103/physrevmaterials.7.024420.

Liu, Ping, et al. “Thermophoretic Analysis of Biomolecules across the Nanoscales in Self-Assembled Polymeric Matrices.”10.1021/acsanm.3c03623__ACS Applied Nano Materials, American Chemical Society (ACS), 2023, doi:10.1021/acsanm.3c03623.

Neufeld, Sergej, et al. “Vibrational Properties of the Potassium Titanyl Phosphate Crystal Family.”10.3390/cryst13101423__Crystals, vol. 13, no. 10, 1423, MDPI AG, 2023, doi:10.3390/cryst13101423.

Lenz, Peter, et al. “Multiphase Elasto-Plastic Mean-Field Homogenisation and Its Consistent Linearisation.”10.1016/j.compstruc.2023.107160__Computers &;amp; Structures, vol. 290, 107160, Elsevier BV, 2023, doi:10.1016/j.compstruc.2023.107160.

Pramanik, Sudipta, et al. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.”10.3390/cryst13111592__Crystals, vol. 13, no. 11, 1592, MDPI AG, 2023, doi:10.3390/cryst13111592.

Zhang, Bingru, et al. “Luminescent DNA-Origami Nano-Rods Dispersed in a Lyotropic Chromonic Liquid Crystal.”10.1080/02678292.2023.2188494__Liquid Crystals, vol. 50, no. 7–10, Informa UK Limited, 2023, pp. 1243–51, doi:10.1080/02678292.2023.2188494.

Gräßler, Iris, et al. “Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security.”10.37544/0720-5953-2023-11-12-60__Konstruktion, vol. 75, no. 11–12, VDI Fachmedien GmbH and Co. KG, 2023, pp. 60–65, doi:10.37544/0720-5953-2023-11-12-60.

Soleymani, Mohammad, et al. “Spectral and Energy Efficiency Maximization of MISO STAR-RIS-Assisted URLLC Systems.”10.1109/access.2023.3294092__IEEE Access, vol. 11, Institute of Electrical and Electronics Engineers (IEEE), 2023, pp. 70833–52, doi:10.1109/access.2023.3294092.

Reitz, A., et al. “Influence of Thermomechanical Processing on the Microstructural and Mechanical Properties of Steel 22Mn.”10.1016/j.msea.2022.142780__Materials Science and Engineering: A, vol. 838, 142780, Elsevier BV, 2022, doi:10.1016/j.msea.2022.142780.

Reineke Matsudo, Bernhard, et al. “Efficient Frequency Conversion with Geometric Phase Control in Optical Metasurfaces.”10.1002/advs.202104508__Advanced Science, vol. 9, no. 12, 2104508, Wiley, 2022, doi:10.1002/advs.202104508.

Heyser, Per, et al. “Consideration of the Manufacturing History of Sheet Metal Components for the Adaptation of a Clinching Process.”10.1177/14644207221077560__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210775, SAGE Publications, 2022, doi:10.1177/14644207221077560.

Xin, Yang, et al. “EnvironmentDependent Stability and Mechanical Properties of DNA Origami SixHelix Bundles with Different Crossover Spacings.”10.1002/smll.202107393__Small, vol. 18, Wiley, 2022, p. 2107393, doi:10.1002/smll.202107393.

Yang, Yu, et al. “Effect of Surface Hydrophobicity on the Adsorption of a Pilus-Derived Adhesin-like Peptide.”10.1021/acs.langmuir.2c01016__Langmuir, vol. 38, American Chemical Society (ACS), 2022, pp. 9257–9265, doi:10.1021/acs.langmuir.2c01016.

McShane, Eric J., et al. “Multimodal Quantification of Degradation Pathways during Extreme Fast Charging of Lithium-Ion Batteries.”10.1039/d2ta05887a__Journal of Materials Chemistry A, vol. 10, no. 44, Royal Society of Chemistry (RSC), 2022, pp. 23927–39, doi:10.1039/d2ta05887a.

Yusuf, Maha, et al. “Simultaneous Neutron and X-Ray Tomography for Visualization of Graphite Electrode Degradation in Fast-Charged Lithium-Ion Batteries.”10.1016/j.xcrp.2022.101145__Cell Reports Physical Science, vol. 3, no. 11, Elsevier BV, 2022, p. 101145, doi:10.1016/j.xcrp.2022.101145.

Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting.”10.1002/adem.202200874__Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.

Römisch, David, et al. “Investigation of the Influence of Formed, Non-Rotationally Symmetrical Pin Geometries and Their Effect on the Joint Quality of Steel and Aluminium Sheets by Direct Pin Pressing.”10.1177/14644207221081408__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 236, no. 6, SAGE Publications, 2022, pp. 1187–202, doi:10.1177/14644207221081408.

Popp, Julian, et al. “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures.”10.3390/app12104962__Applied Sciences, vol. 12, no. 10, 4962, MDPI AG, 2022, doi:10.3390/app12104962.

Varghese, J., et al. “Enhanced Corrosion Resistance of Epoxy-Films on Ultra-Thin SiOx PECVD Film Coated Laser Surface Melted Al-Alloys.”10.1007/s42452-022-05244-0__SN Applied Sciences, vol. 5, no. 1, 29, Springer Science and Business Media LLC, 2022, doi:10.1007/s42452-022-05244-0.

Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.”10.4028/p-5fxp53__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1457–67, doi:10.4028/p-5fxp53.

Hanke, Marcel, et al. “Direct Visualization of the Drug Loading of Single DNA Origami Nanostructures by AFM-IR Nanospectroscopy.”10.1039/d2nr02701a__Nanoscale, vol. 14, Royal Society of Chemistry (RSC), 2022, pp. 11552–60, doi:10.1039/d2nr02701a.

Schulze Lammers, Bertram, et al. “Real-Space Identification of Non-Noble Single Atomic Catalytic Sites within Metal-Coordinated Supramolecular Networks.”10.1021/acsnano.2c04439__ACS Nano, vol. 16, no. 9, American Chemical Society (ACS), 2022, pp. 14284–96, doi:10.1021/acsnano.2c04439.

Elizabeth, Amala, et al. “Surface Passivation and Detrimental Heat-Induced Diffusion Effects in RbF-Treated Cu(In,Ga)Se<sub>2</sub> Solar Cell Absorbers.”10.1021/acsami.2c08257__ACS Applied Materials &;amp; Interfaces, vol. 14, no. 29, American Chemical Society (ACS), 2022, pp. 34101–12, doi:10.1021/acsami.2c08257.

Raghuwanshi, Mohit, et al. “Fingerprints Indicating Superior Properties of Internal Interfaces in Cu(In,Ga)Se            <sub>2</sub>            ThinFilm Solar Cells.”10.1002/adma.202203954__Advanced Materials, vol. 34, no. 37, 2203954, Wiley, 2022, doi:10.1002/adma.202203954.

Lepre, Enrico, et al. “Ni-Based Electrocatalysts for Unconventional CO2 Reduction Reaction to Formic Acid.”10.1016/j.nanoen.2022.107191__Nano Energy, vol. 97, 107191, Elsevier BV, 2022, doi:10.1016/j.nanoen.2022.107191.

Kim, Sanghoon, et al. “Giant Orbital Anisotropy with Strong Spin–Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice.”10.1002/advs.202201749__Advanced Science, vol. 9, no. 24, Wiley, 2022, p. 2201749, doi:10.1002/advs.202201749.

Zeuner, André Till, et al. “The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints.”10.3390/met12091514__Metals, vol. 12, no. 9, 1514, MDPI AG, 2022, doi:10.3390/met12091514.

Kalich, Jan, et al. “Long-Term Behavior of Clinched Electrical Contacts.”10.3390/met12101651__Metals, vol. 12, no. 10, 1651, MDPI AG, 2022, doi:10.3390/met12101651.

Gröger, Benjamin, et al. “Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study.”10.3390/ma15207241__Materials, vol. 15, no. 20, 7241, MDPI AG, 2022, doi:10.3390/ma15207241.

Köhler, Daniel, et al. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.”10.4028/p-32330d__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1489–97, doi:10.4028/p-32330d.

Harzheim, Sven, et al. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded Clinched Joints.”10.1080/15376494.2022.2140233__Mechanics of Advanced Materials and Structures, Informa UK Limited, 2022, pp. 1–6, doi:10.1080/15376494.2022.2140233.

Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.”10.4028/p-5d009y__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1516–26, doi:10.4028/p-5d009y.

Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.”10.4028/p-wpuzyw__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:10.4028/p-wpuzyw.

Lepre, Enrico, et al. “Ni-Based Electrocatalysts for Unconventional CO2 Reduction Reaction to Formic Acid.”10.1016/j.nanoen.2022.107191__Nano Energy, vol. 97, 107191, Elsevier BV, 2022, doi:10.1016/j.nanoen.2022.107191.

Feng, Yanyue, et al. “Synthesis and Characterization of Catalytically Active Au CorePd Shell Nanoparticles Supported on Alumina.”10.1021/acs.langmuir.2c01834__Langmuir, vol. 38, no. 42, American Chemical Society (ACS), 2022, pp. 12859–70, doi:10.1021/acs.langmuir.2c01834.

Lepre, Enrico, et al. “Ni-Based Electrocatalysts for Unconventional CO2 Reduction Reaction to Formic Acid.”10.1016/j.nanoen.2022.107191__Nano Energy, vol. 97, 107191, Elsevier BV, 2022, doi:10.1016/j.nanoen.2022.107191.

Piankova, Diana, et al. “Following Carbon Condensation by in Situ TEM: Towards a Rational Understanding of the Processes in the Synthesis of Nitrogen-Doped Carbonaceous Materials.”10.1039/d2ta05247d__Journal of Materials Chemistry A, vol. 10, no. 47, Royal Society of Chemistry (RSC), 2022, pp. 25220–29, doi:10.1039/d2ta05247d.

Wang, Huize, et al. “Modulating between 2e<sup></sup> and 4e<sup></sup> Pathways in the Oxygen Reduction Reaction with Laser-Synthesized Iron Oxide-Grafted Nitrogen-Doped Carbon.”10.1039/d2ta05838c__Journal of Materials Chemistry A, vol. 10, no. 45, Royal Society of Chemistry (RSC), 2022, pp. 24156–66, doi:10.1039/d2ta05838c.

Odziomek, Mateusz, et al. “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor.”10.1002/adma.202206405__Advanced Materials, vol. 34, no. 40, 2206405, Wiley, 2022, doi:10.1002/adma.202206405.

Schulze Lammers, Bertram, et al. “Real-Space Identification of Non-Noble Single Atomic Catalytic Sites within Metal-Coordinated Supramolecular Networks.”10.1021/acsnano.2c04439__ACS Nano, vol. 16, no. 9, American Chemical Society (ACS), 2022, pp. 14284–96, doi:10.1021/acsnano.2c04439.

Odziomek, Mateusz, et al. “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor.”10.1002/adma.202206405__Advanced Materials, vol. 34, no. 40, 2206405, Wiley, 2022, doi:10.1002/adma.202206405.

Javed, Ali, et al. “The Role of Sulfonate Groups and Hydrogen Bonding in the Proton Conductivity of Two Coordination Networks.”10.3762/bjnano.13.36__Beilstein Journal of Nanotechnology, vol. 13, Beilstein Institut, 2022, pp. 437–43, doi:10.3762/bjnano.13.36.

Wituschek, Simon, et al. “Geometric and Mechanical Joint Characterization of Conventionally  and Tumbled Self-Piercing Riveting Joints.”10.1177/14644207221135400__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072211354, SAGE Publications, 2022, doi:10.1177/14644207221135400.

Long, Teng, et al. “Helical Polariton Lasing from Topological Valleys in an Organic Crystalline Microcavity.”10.1002/advs.202203588__Advanced Science, vol. 9, no. 29, 2203588, Wiley, 2022, doi:10.1002/advs.202203588.

Krenz, Marvin, et al. “Bound Polaron Formation in Lithium Niobate from Ab Initio Molecular Dynamics.”10.1007/s00339-022-05577-y__Applied Physics A, vol. 128, Springer Science and Business Media LLC, 2022, p. 480, doi:10.1007/s00339-022-05577-y.

Vieth, Pascal, et al. “Assessment of Mechanical and Optical Properties of Al 6060 Alloy Particles by Removal of Contaminants.”10.1002/adem.202201081__Advanced Engineering Materials, Wiley, 2022, doi:10.1002/adem.202201081.

Wituschek, Simon, et al. “Geometric and Mechanical Joint Characterization of Conventionally  and Tumbled Self-Piercing Riveting Joints.”10.1177/14644207221135400__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072211354, SAGE Publications, 2022, doi:10.1177/14644207221135400.

Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by TwinRoll Casting.”10.1002/adem.202200874__Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.

Oesterwinter, Annika, et al. “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).”10.3390/met12050869__Metals, vol. 12, no. 5, 869, MDPI AG, 2022, doi:10.3390/met12050869.

Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”10.4028/p-1n6741__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1468–78, doi:10.4028/p-1n6741.

Joy, Tintu David, et al. “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.”10.3390/app12157557__Applied Sciences, vol. 12, no. 15, 7557, MDPI AG, 2022, doi:10.3390/app12157557.

Kullmer, Gunter, et al. “Development of a Method for the Separate Measurement of the Growth of Internal Crack Tips by Means of the Potential Drop Method.”10.1016/j.engfracmech.2022.108899__Engineering Fracture Mechanics, 108899, Elsevier BV, 2022, doi:10.1016/j.engfracmech.2022.108899.

Moritz, Dominik Christian, et al. “P-Terminated InP(001) Surfaces: Surface Band Bending and Reactivity to Water.”10.1021/acsami.2c13352__ACS Applied Materials &;amp; Interfaces, vol. 14, no. 41, American Chemical Society (ACS), 2022, pp. 47255–61, doi:10.1021/acsami.2c13352.

Murzakhanov, Fadis F., et al. “Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically Polarized V<sub>B</sub><sup>–</sup> Spin States in HBN.”10.1021/acs.nanolett.1c04610__Nano Letters, vol. 22, no. 7, American Chemical Society (ACS), 2022, pp. 2718–24, doi:10.1021/acs.nanolett.1c04610.

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.”10.4028/p-3rk19y__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 683–89, doi:10.4028/p-3rk19y.

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control.”10.3390/met12010158__Metals, vol. 12, no. 1, 158, MDPI AG, 2022, doi:10.3390/met12010158.

Schramm, Britta, and Deborah Weiß. “Fracture Mechanical Evaluation of the Material HX.”10.1515/mt-2022-0191__Materials Testing, vol. 64, no. 10, Walter de Gruyter GmbH, 2022, pp. 1437–49, doi:10.1515/mt-2022-0191.

Javed, Muhammad Ali, et al. “Apparatus for the Measurement of the Thermodynamic Speed of Sound of Diethylene Glycol and Triethylene Glycol.”10.1016/j.jct.2022.106766__The Journal of Chemical Thermodynamics, 106766, Elsevier BV, 2022, doi:10.1016/j.jct.2022.106766.

Betken, Benjamin, et al. “Thermodynamic Properties for 1-Hexene – Measurements and Modeling.”10.1016/j.jct.2022.106881__The Journal of Chemical Thermodynamics, 106881, Elsevier BV, 2022, doi:10.1016/j.jct.2022.106881.

Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.”10.3390/ma15124072__Materials, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.

Slapáková, Michaela, et al. “The Influence of Surface on Direction of Diffusion in Al-Fe Clad Material.”10.1016/j.matchar.2022.112005__Materials Characterization, vol. 190, 112005, Elsevier BV, 2022, doi:10.1016/j.matchar.2022.112005.

Hein, Maxwell, et al. “Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications.”10.3390/met12010122__Metals, vol. 12, no. 1, 122, MDPI AG, 2022, doi:10.3390/met12010122.

Reitz, Alexander, et al. “Influence of Thermomechanical Processing on the Microstructural and Mechanical Properties of Steel 22Mn.”10.1016/j.msea.2022.142780__Materials Science and Engineering: A, vol. 838, 142780, Elsevier BV, 2022, doi:10.1016/j.msea.2022.142780.

Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.”10.1016/j.matlet.2022.132384__Materials Letters, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.

Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafinegrained Medium Mn TRIP Steel.”10.1002/adem.202200022__Advanced Engineering Materials, Wiley, 2022, doi:10.1002/adem.202200022.

Pramanik, Sudipta, et al. “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study.”10.3390/cryst12091217__Crystals, vol. 12, no. 9, 1217, MDPI AG, 2022, doi:10.3390/cryst12091217.

Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.”10.3390/ma15124072__Materials, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.

Hein, Maxwell, et al. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, 107235, Elsevier BV, 2022, doi:10.1016/j.ijfatigue.2022.107235.

Pramanik, Sudipta, et al. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.”10.1016/j.msea.2022.143887__Materials Science and Engineering: A, vol. 854, 143887, Elsevier BV, 2022, doi:10.1016/j.msea.2022.143887.

Hein, Maxwell, et al. “Heat Treatments of Metastable ;2 Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.”10.3390/ma15113774__Materials, vol. 15, no. 11, 3774, MDPI AG, 2022, doi:10.3390/ma15113774.

Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.”10.1016/j.matlet.2022.132384__Materials Letters, vol. 321, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.

Huang, Jingyuan, et al. “Influence of Proteins on the Corrosion of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.”10.1016/j.corsci.2022.110186__Corrosion Science, vol. 200, Elsevier BV, 2022, p. 110186, doi:10.1016/j.corsci.2022.110186.

Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an UltrafineGrained Medium Mn TRIP Steel.”10.1002/adem.202200022__Advanced Engineering Materials, vol. 24, no. 9, 2200022, Wiley, 2022, doi:10.1002/adem.202200022.

Huang, Jingyuan, et al. “Influence of Proteins on the Corrosion of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.”10.1016/j.corsci.2022.110186__Corrosion Science, vol. 200, 110186, Elsevier BV, 2022, doi:10.1016/j.corsci.2022.110186.

Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.”10.1002/adem.202201008__Advanced Engineering Materials, 2201008, Wiley, 2022, doi:10.1002/adem.202201008.

Pramanik, Sudipta, et al. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.”10.1016/j.msea.2022.143887__Materials Science and Engineering: A, vol. 854, 143887, Elsevier BV, 2022, doi:10.1016/j.msea.2022.143887.

Pramanik, Sudipta, et al. “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study.”10.3390/cryst12091217__Crystals, vol. 12, no. 9, 1217, MDPI AG, 2022, doi:10.3390/cryst12091217.

Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.”10.3390/ma15124072__Materials, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.

Hein, Maxwell, et al. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, 107235, Elsevier BV, 2022, doi:10.1016/j.ijfatigue.2022.107235.

Rossel, Moritz Sebastian, and Gerson Meschut. “Increasing the Accuracy of Clinching Process Simulations by Modeling the Friction as a Function of Local Joining Process Parameters.”10.1177/14644207221074290__Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210742, SAGE Publications, 2022, doi:10.1177/14644207221074290.