Single-step self-punching lockbolt process for aluminum sheets without pre-hole
D. Han, F. Kappe, J. Vorderbrüggen, J. Jendrny, E. Gorr, G. Meschut, Journal of Manufacturing Processes 116 (2024) 92–108.

Dynamics of an Absorption/Desorption Plant: Experimental Study and Model Validation
M. Weber, N. Lutters, E.Y. Kenig, Industrial &;amp; Engineering Chemistry Research (2024).

A multi-step framework for the design of a flexible power-to-methane process
B. Bruns, M. Gross, M. Grünewald, V. Bertsch, J. Riese, Journal of Cleaner Production (2024).

Decentralized production concepts for bio-based polymers - implications for supply chains, costs, and the carbon footprint
J. Riese, H. Fasel, M. Pannok, S. Lier, Sustainable Production and Consumption (2024).

Data-driven simulation-based decision support system for resource allocation in industry 4.0 and smart manufacturing
E. Mahmoodi, M. Fathi, M. Tavana, M. Ghobakhloo, A.H.C. Ng, Journal of Manufacturing Systems 72 (2024) 287–307.

Online load balancing on uniform machines with limited migration
M. Maack, Operations Research Letters 51 (2023) 220–225.

Powder bed fusion of soft-magnetic iron-based alloys with high silicon content
A. Andreiev, K.-P. Hoyer, F. Hengsbach, M. Haase, L. Tasche, K. Duschik, M. Schaper, Journal of Materials Processing Technology 317 (2023).

Impact of COVID-19 on the private and professional lives of highly educated women working in global health in Europe—A qualitative study
C. Hoffmann, T. Schneider, C. Wannous, K. Nyberger, I. Haavardsson, B. Gilmore, P. Quigley, A.S. Winkler, S. Ludwig, Frontiers in Global Women’s Health 4 (2023).

Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples
S. Pramanik, K.-P. Hoyer, M. Schaper, Rapid Prototyping Journal 29 (2023) 1257–1269.

Handling of uncertainties in the design of sustainable Additive Manufacturing products by merging Design-for-X and Scenario-Technique
I. Gräßler, I. Mozgova, J. Pottebaum, M. Ott, P. Jung, P. Hesse, in: R. Teti (Ed.), Procedia CIRP ICME, Elsevier, 2023.

Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements
T. Borgert, M. Henke, W. Homberg, Journal of Manufacturing and Materials Processing 7 (2023).

Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J. Schmid, Progress in Additive Manufacturing (2023).

Pseudo-Labeling Machine Learning Algorithm for Predictive Maintenance of Relays
F. Winkel, O. Wallscheid, P. Scholz, J. Böcker, IEEE Open Journal of the Industrial Electronics Society (2023) 1–14.

Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets
B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, Journal of Manufacturing and Materials Processing 7 (2023).

Softsensors: key component of property control in forming technology
W. Homberg, B. Arian, V. Arne, T. Borgert, A. Brosius, P. Groche, C. Hartmann, L. Kersting, R. Laue, J. Martschin, T. Meurer, D. Spies, A.E. Tekkaya, A. Trächtler, W. Volk, F. Wendler, M. Wrobel, Production Engineering (2023).

Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process
M. Neuser, M. Schaper, O. Grydin, Journal of Manufacturing and Materials Processing 7 (2023).

Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates
T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, M. Schaper, Journal of Manufacturing and Materials Processing 7 (2023).

Depiction of support structures in technical drawings
S. Lammers, T. Koers, B. Magyar, D. Zimmer, T. Lieneke, in: Austin, Texas, USA, 2023.

Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.

Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis
F. Neitzel, I. Kletetzka, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.

Editorial: Remote @ Distance
I. Krause, H. Jacobsen, C. Gerhards, Arbeit 32 (2023) 105–110.

Coworking
I. Krause, Arbeit 32 (2023) 217–236.

Frontmatter
I. Krause, H. Jacobsen, C. Gerhards, Arbeit 32 (2023) i–ii.

Clear Roads and Dirty Air? Indirect effects of reduced private traffic congestion on emissions from heavy traffic
C. Hoffmann, K. Thommes, Journal of Cleaner Production (2022).

Clear Roads and Dirty Air? Indirect effects of reduced private traffic congestion on emissions from heavy traffic
C. Hoffmann, K. Thommes, Journal of Cleaner Production (2022).

Numerical and experimental identification of fatigue crack initiation sites in clinched joints
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.

Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels
C. Zirngibl, B. Schleich, S. Wartzack, AI 3 (2022) 990–1006.

Potentials and challenges of analyzing use phase data in product planning of manufacturing companies
M. Meyer, T. Fichtler, C. Koldewey, R. Dumitrescu, Artificial Intelligence for Engineering Design, Analysis and Manufacturing 36 (2022).

Robustness Analysis of Pin Joining
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).

Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions
A. Borowski, B. Gröger, R. Füßel, M. Gude, Journal of Manufacturing and Materials Processing 6 (2022).

Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution
D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).

Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation
J. Schaude, T. Hausotte, Nanomanufacturing and Metrology 5 (2022) 139–148.

Robust estimation of clinch joint characteristics based on data-driven methods
C. Zirngibl, B. Schleich, S. Wartzack, The International Journal of Advanced Manufacturing Technology (2022).

Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien
M. Ott, N. Meihöfener, R. Koch, in: Deutscher Verband für Materialforschung und -prüfung e.V.  (Ed.), Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, Berlin, 2022, pp. 91–106.

Mechanical joining in versatile process chains
G. Meschut, M. Merklein, A. Brosius, M. Bobbert, Production Engineering 16 (2022) 187–191.

Joining of multi-material structures using a versatile self-piercing riveting process
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, G. Meschut, Production Engineering (2022).

Provision of cross-domain knowledge in mechanical joining using ontologies
C. Zirngibl, P. Kügler, J. Popp, C.R. Bielak, M. Bobbert, D. Drummer, G. Meschut, S. Wartzack, B. Schleich, Production Engineering (2022).

Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods
F. Kappe, C. Zirngibl, B. Schleich, M. Bobbert, S. Wartzack, G. Meschut, Journal of Manufacturing Processes 84 (2022) 1438–1448.

Impact of aging on the energy efficiency of household refrigerating appliances
A. Paul, E. Baumhögger, A. Elsner, M. Reineke, C. Hueppe, R. Stamminger, H. Hoelscher, H. Wagner, U. Gries, W. Becker, J. Vrabec, Applied Thermal Engineering 205 (2022).

Experimentelle Untersuchung der Tropfenkondensation am chemisch modifizierten EdelstahlDrallrohr
D. Dai, E.Y. Kenig, R. Numrich, Chemie Ingenieur Technik 94 (2022) 905–911.

On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy
M. Hein, N.F. Lopes Dias, D. Kokalj, D. Stangier, K.-P. Hoyer, W. Tillmann, M. Schaper, International Journal of Fatigue 166 (2022).

On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy
M. Hein, N.F. Lopes Dias, D. Kokalj, D. Stangier, K.-P. Hoyer, W. Tillmann, M. Schaper, International Journal of Fatigue 166 (2022).

Modelling and simulation of zero-gravity distillation units with metal foams
M. Wende, C. Staggenborg, E.Y. Kenig, Chemical Engineering Science 247 (2022).

Numerical and experimental identification of fatigue crack initiation sites in clinched joints
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.

Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area
S. Martin, C.R. Bielak, M. Bobbert, T. Tröster, G. Meschut, Production Engineering (2022).

Modelling film and rivulet flows on microstructured surfaces using CFD methods
R. Bertling, M. Hack, I. Ausner, B. Horschitz, S.A. Bernemann, E. Kenig, Chemical Engineering Science 251 (2022).

Modelling film and rivulet flows on microstructured surfaces using CFD methods
R. Bertling, M. Hack, I. Ausner, B. Horschitz, S. Bernemann, E.Y. Kenig, Chemical Engineering Science 251 (2022).

Operating window and flexibility of a lab-scale methanation plant
F. Herrmann, M. Grünewald, T. Meijer, U. Gardemann, L. Feierabend, J. Riese, Chemical Engineering Science 254 (2022).

Experimental Characterization of 3D Printed Structured Metal Packing with an Enclosed Column Wall
J. Riese, A. Reitze, M. Grünewald, Chemie Ingenieur Technik 94 (2022) 993–1001.

Performance of a Laboratory-Scale Methanation Plant with Catalyst Dilution under Dynamic Operating Conditions
F. Herrmann, M. Grünewald, T. Meijer, U. Gardemann, J. Riese, Industrial &;amp; Engineering Chemistry Research 61 (2022) 9644–9657.

Numerical analysis of conjugate heat transfer within internally channeled tubes
A.J.S. Al-Lami, E.Y. Kenig, V. Inguva, Applied Thermal Engineering 223 (2022).

Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg
M. Neuser, O. Grydin, Y. Frolov, M. Schaper, Production Engineering (2022).

A comprehensive framework for sustainable closed-loop supply chain network design
M. Tavana, H. Kian, A.K. Nasr, K. Govindan, H. Mina, Journal of Cleaner Production 332 (2022).

A multi-distance interval-valued neutrosophic approach for social failure detection in sustainable municipal waste management
A. Ebadi Torkayesh, M. Tavana, F.J. Santos-Arteaga, Journal of Cleaner Production 336 (2022).

Design and Experimental Investigation of an Additively Manufactured PMSM Rotor
S. Urbanek, F. Pauline, S. Magerkohl, D. Zimmer, L. Tasche, M. Schaper, B. Ponick, in: 2021.

Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry
E. Zhuravlev, B. Milkereit, B. Yang, S. Heiland, P. Vieth, M. Voigt, M. Schaper, G. Grundmeier, C. Schick, O. Kessler, Materials &; Design (2021).

A PLIC-based method for species mass transfer at free fluid interfaces
A. Schulz, C. Wecker, V. Inguva, A.S. Lopatin, E.Y. Kenig, Chemical Engineering Science 251 (2021).

The influence of manufacturing processes and optical measurement methods on the damage behavior of LAD micro-alloyed steels
M. Otroshi, G. Meschut, A. Nesakumar, Journal of Manufacturing Engineering 16 (2021) 70–76.

Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens
D. Weiß, B. Schramm, G. Kullmer, Production Engineering (2021).

Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior
K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, M. Schaper, Rapid Prototyping Journal 28 (2021) 833–840.

Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy
S. Pramanik, A. Andreiev, K.-P. Hoyer, M. Schaper, International Journal of Fatigue 153 (2021).

Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study
S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing 46 (2021).

A universal electrochemical activation enabling lattice oxygen activation in nickel-based catalyst for efficient water oxidation
J. Hu, D. Jiang, Z. Weng, Y. Pan, Z. Li, H. Du, Y. Yuan, Chemical Engineering Journal 430 (2021).

Mechanical joining of glass fibre reinforced polymer (GFRP) through an innovative solid self-piercing rivet
D. Han, K. Yang, G. Meschut, Journal of Materials Processing Technology 296 (2021).

Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets
B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering 16 (2021) 203–212.

Concept of a Flexible WettedWall Column for the Distillation of Specialty Chemicals
A. Reitze, M. Grünewald, J. Riese, Chemical Engineering &;amp; Technology 44 (2021) 1327–1335.

Characterization of Liquid-Phase Distribution in 3D Printed Structured Packings with an Enclosed Column Wall
A. Reitze, M. Grünewald, J. Riese, Industrial &;amp; Engineering Chemistry Research 61 (2021) 740–746.

Flexibility analysis for demand-side management in large-scale chemical processes: An ethylene oxide production case study
B. Bruns, A. Di Pretoro, M. Grünewald, J. Riese, Chemical Engineering Science 243 (2021).

Indirect Demand Response Potential of Large-Scale Chemical Processes
B. Bruns, A. Di Pretoro, M. Grünewald, J. Riese, Industrial &;amp; Engineering Chemistry Research 61 (2021) 605–620.

Dynamic Design Optimization for Flexible Process Equipment
B. Bruns, F. Herrmann, M. Grünewald, J. Riese, Industrial &;amp; Engineering Chemistry Research 60 (2021) 7678–7688.

Efficient Production of Specialized Polymers with Highly Flexible SmallScale Plants
B. Bruns, T. Becker, J. Riese, S. Lier, B. Werners, Chemical Engineering &;amp; Technology 44 (2021) 1148–1152.

Experimentelle Untersuchungen zum Tropfenmitriss im Feedeinleitbereich von Destillationskolonnen
H. Fasel, N. Darvishsefat, J. Riese, M. Grünewald, Chemie Ingenieur Technik 93 (2021) 1100–1106.

Transforming into a Platform Provider: Strategic Options for Industrial Smart Service Providers
D. Beverungen, D. Kundisch, N. Wünderlich, Journal of Service Management 32 (2021) 507–532.

Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V 
D. Ahlers, Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V , Shaker, 2020.

Introduction to the Special Issue cBargainingd
C.-J. Haake, W. Trockel, Homo Oeconomicus 37 (2020) 1–6.

Encrypted polynomial control based on tailored twoparty computation
M. Schulze Darup, International Journal of Robust and Nonlinear Control 30 (2020) 4168–4187.

Optimal eventtriggered transmission scheduling for privacypreserving wireless state estimation
J. Lu, A.S. Leong, D.E. Quevedo, International Journal of Robust and Nonlinear Control 30 (2020) 4205–4224.

Decomposition Reactions of Fe(CO)<sub>5</sub>, Fe(C<sub>5</sub>H<sub>5</sub>)<sub>2</sub>, and TTIP as Precursors for the Spray-Flame Synthesis of Nanoparticles in Partial Spray Evaporation at Low Temperatures
M. Gonchikzhapov, T. Kasper, Industrial &;amp; Engineering Chemistry Research 59 (2020) 8551–8561.

Enhanced electrocatalytic oxygen evolution by manipulation of electron transfer through cobalt-phosphorous bridging
Y. Pan, H. Ren, R. Chen, Y. Wu, D. Chu, Chemical Engineering Journal 398 (2020).

Separation Units 4.0 – Trennapparate heute und morgen
J. Riese, A. Hoff, J. Stock, A. Górak, M. Grünewald, Chemie Ingenieur Technik 92 (2020) 818–830.

Transformable Decentral Production for Local Economies with Minimized Carbon Footprint
M. Pannok, M. Finkbeiner, H. Fasel, J. Riese, S. Lier, ChemBioEng Reviews 7 (2020) 216–228.

Modular Production with BioBased Resources in a Decentral Production Network
M. Finkbeiner, M. Pannok, H. Fasel, J. Riese, S. Lier, Chemie Ingenieur Technik 92 (2020) 2041–2045.

Comparison of the Operating Range of a WettedWall Column with a Packed Column for Distillation
A. Reitze, M. Grünewald, J. Riese, Chemie Ingenieur Technik 92 (2020) 1968–1975.

New Column Design to Enhance Flexibility: Concept for Hydrodynamic Characterization
H. Fasel, M. Grünewald, J. Riese, Chemie Ingenieur Technik 92 (2020) 2035–2040.

Flexibility of PowertoGas Plants: A Case Study
F. Herrmann, M. Grünewald, J. Riese, Chemie Ingenieur Technik 92 (2020) 1983–1991.

Challenges and Opportunities to Enhance Flexibility in Design and Operation of Chemical Processes
J. Riese, M. Grünewald, Chemie Ingenieur Technik 92 (2020) 1887–1897.

Analysis of Capacity Potentials in Continuously Operated Chemical Processes
B. Bruns, M. Grünewald, J. Riese, Chemie Ingenieur Technik 92 (2020) 2005–2015.

On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process
S. Josupeit, On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process, Shaker Verlag GmbH, Düren, 2019.

Putting 5G into Production: Realizing a Smart Manufacturing Vertical Scenario
S.B. Schneider, M. Peuster, D. Behnke, M. Marcel, P.-B. Bök, H. Karl, in: European Conference on Networks and Communications (EuCNC), IEEE, Valencia, Spain, 2019.

"Producing Cloud-Native": Smart Manufacturing Use Cases on Kubernetes
S.B. Schneider, M. Peuster, K. Hannemann, D. Behnke, M. Müller, P.-B. Bök, H. Karl, in: IEEE Conference on Network Function Virtualization and Software Defined Networks (NFV-SDN) Demo Track, IEEE, Dallas, TX, USA, 2019.

The value of signals: Do self-declaration and certification generate price premiums for organic and biodynamic wines?
P. Fanasch, B. Frick, Journal of Cleaner Production 249 (2019).

Modeling and Validating FixedBed Reactors: A StateoftheArt Review
C. Stegehake, J. Riese, M. Grünewald, ChemBioEng Reviews 6 (2019) 28–44.

Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with  layers
F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing 3 (2018) 221–231.

Political embeddedness and the diffusion of corporate social responsibility practices in China: A trade-off between financial and CSR performance?
Z. Wang, D. Reimsbach, G. Braam, Journal of Cleaner Production 198 (2018) 1185–1197.

Optimization of the energy supply in the plastics industry to reduce the primary energy demand
H. Dunkelberg, J. Wagner, C. Hannen, A. Schlüter, L. Phan, J. Hesselbach, C.-X. Lin, Journal of Cleaner Production 192 (2018) 790–800.

Modeling and Validating FixedBed Reactors: A StateoftheArt Review
C. Stegehake, J. Riese, M. Grünewald, Chemie Ingenieur Technik 90 (2018) 1739–1758.

Investigation of the structure and spread rate of flames over PMMA slabs
H.R. Rakesh Ranga, O.P. Korobeinichev, A. Harish, V. Raghavan, A. Kumar, I.E. Gerasimov, M.B. Gonchikzhapov, A.G. Tereshchenko, S.A. Trubachev, A.G. Shmakov, Applied Thermal Engineering 130 (2017) 477–491.

Investigation of the structure and spread rate of flames over PMMA slabs
H.R. Rakesh Ranga, O.P. Korobeinichev, A. Harish, V. Raghavan, A. Kumar, I.E. Gerasimov, M.B. Gonchikzhapov, A.G. Tereshchenko, S.A. Trubachev, A.G. Shmakov, Applied Thermal Engineering 130 (2017) 477–491.

Experimental setup of a cascaded two-stage organic Rankine cycle
F.H. Dubberke, M. Linnemann, W.K. Abbas, E. Baumhögger, K.-P. Priebe, M. Roedder, M. Neef, J. Vrabec, Applied Thermal Engineering 131 (2017) 958–964.

Innovative scaling strategies for a fast development of apparatuses by modular process engineering
S. Lier, J. Riese, G. Cvetanoska, A.K. Lesniak, S. Müller, S. Paul, L. Sengen, M. Grünewald, Chemical Engineering and Processing - Process Intensification 123 (2017) 111–125.