D. Han, F. Kappe, J. Vorderbrüggen, J. Jendrny, E. Gorr, and G. Meschut, “Single-step self-punching lockbolt process for aluminum sheets without pre-hole,”10.1016/j.jmapro.2024.02.043__Journal of Manufacturing Processes, vol. 116, pp. 92–108, 2024, doi:10.1016/j.jmapro.2024.02.043 .

M. Weber, N. Lutters, and E. Y. Kenig, “Dynamics of an Absorption/Desorption Plant: Experimental Study and Model Validation,”10.1021/acs.iecr.3c03262__Industrial &;amp; Engineering Chemistry Research, 2024, doi:10.1021/acs.iecr.3c03262 .

B. Bruns, M. Gross, M. Grünewald, V. Bertsch, and J. Riese, “A multi-step framework for the design of a flexible power-to-methane process,”10.1016/j.jclepro.2024.141434__Journal of Cleaner Production, Art. no. 141434, 2024, doi:10.1016/j.jclepro.2024.141434 .

J. Riese, H. Fasel, M. Pannok, and S. Lier, “Decentralized production concepts for bio-based polymers - implications for supply chains, costs, and the carbon footprint,”10.1016/j.spc.2024.03.001__Sustainable Production and Consumption, 2024, doi:10.1016/j.spc.2024.03.001 .

E. Mahmoodi, M. Fathi, M. Tavana, M. Ghobakhloo, and A. H. C. Ng, “Data-driven simulation-based decision support system for resource allocation in industry 4.0 and smart manufacturing,”10.1016/j.jmsy.2023.11.019__Journal of Manufacturing Systems, vol. 72, pp. 287–307, 2024, doi:10.1016/j.jmsy.2023.11.019 .

M. Maack, “Online load balancing on uniform machines with limited migration,”10.1016/j.orl.2023.02.013__Operations Research Letters, vol. 51, no. 3, pp. 220–225, 2023, doi:10.1016/j.orl.2023.02.013 .

A. Andreiev et al., “Powder bed fusion of soft-magnetic iron-based alloys with high silicon content,”10.1016/j.jmatprotec.2023.117991__Journal of Materials Processing Technology, vol. 317, Art. no. 117991, 2023, doi:10.1016/j.jmatprotec.2023.117991 .

C. Hoffmann et al., “Impact of COVID-19 on the private and professional lives of highly educated women working in global health in Europe—A qualitative study,”10.3389/fgwh.2023.1009473__Frontiers in Global Women’s Health, vol. 4, 2023, doi:10.3389/fgwh.2023.1009473 .

S. Pramanik, K.-P. Hoyer, and M. Schaper, “Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples,”10.1108/rpj-06-2022-0190__Rapid Prototyping Journal, vol. 29, no. 6, pp. 1257–1269, 2023, doi:10.1108/rpj-06-2022-0190 .

I. Gräßler, I. Mozgova, J. Pottebaum, M. Ott, P. Jung, and P. Hesse, “Handling of uncertainties in the design of sustainable Additive Manufacturing products by merging Design-for-X and Scenario-Technique,” in Procedia CIRP ICME, Gulf of Naples, 2023.

T. Borgert, M. Henke, and W. Homberg, “Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements,”10.3390/jmmp7040147__Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 147, 2023, doi:10.3390/jmmp7040147 .

I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends,”10.1007/s40964-023-00501-z__Progress in Additive Manufacturing, 2023, doi:10.1007/s40964-023-00501-z .

F. Winkel, O. Wallscheid, P. Scholz, and J. Böcker, “Pseudo-Labeling Machine Learning Algorithm for Predictive Maintenance of Relays,”10.1109/ojies.2023.3323870__IEEE Open Journal of the Industrial Electronics Society, pp. 1–14, 2023, doi:10.1109/ojies.2023.3323870 .

B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets,”10.3390/jmmp7060193__Journal of Manufacturing and Materials Processing, vol. 7, no. 6, Art. no. 193, 2023, doi:10.3390/jmmp7060193 .

W. Homberg et al., “Softsensors: key component of property control in forming technology,”10.1007/s11740-023-01227-1__Production Engineering, 2023, doi:10.1007/s11740-023-01227-1 .

M. Neuser, M. Schaper, and O. Grydin, “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process,”10.3390/jmmp7040132__Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 132, 2023, doi:10.3390/jmmp7040132 .

T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, and M. Schaper, “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates,”10.3390/jmmp7050169__Journal of Manufacturing and Materials Processing, vol. 7, no. 5, Art. no. 169, 2023, doi:10.3390/jmmp7050169 .

S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” presented at the 34th Annual Solid Freeform Fabrication Symposium, Austin, TExas, USA, 2023.

I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,”https://doi.org/10.26153/tsw/50931__in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi:https://doi.org/10.26153/tsw/50931 .

F. Neitzel, I. Kletetzka, and H.-J. Schmid, “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis,”https://doi.org/10.26153/tsw/50926__in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi:https://doi.org/10.26153/tsw/50926 .

I. Krause, H. Jacobsen, and C. Gerhards, “Editorial: Remote @ Distance,”10.1515/arbeit-2023-0007__Arbeit, vol. 32, no. 2, pp. 105–110, 2023, doi:10.1515/arbeit-2023-0007 .

I. Krause, “Coworking,”10.1515/arbeit-2023-0013__Arbeit, vol. 32, no. 2, pp. 217–236, 2023, doi:10.1515/arbeit-2023-0013 .

I. Krause, H. Jacobsen, and C. Gerhards, “Frontmatter,”10.1515/arbeit-2023-frontmatter26__Arbeit, vol. 32, no. 2, pp. i–ii, 2023, doi:10.1515/arbeit-2023-frontmatter26 .

C. Hoffmann and K. Thommes, “Clear Roads and Dirty Air? Indirect effects of reduced private traffic congestion on emissions from heavy traffic,”10.1016/j.jclepro.2022.135053__Journal of Cleaner Production, Art. no. 135053, 2022, doi:10.1016/j.jclepro.2022.135053 .

C. Hoffmann and K. Thommes, “Clear Roads and Dirty Air? Indirect effects of reduced private traffic congestion on emissions from heavy traffic,”10.1016/j.jclepro.2022.135053__Journal of Cleaner Production, Art. no. 135053, 2022, doi:10.1016/j.jclepro.2022.135053 .

L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,”10.1007/s11740-022-01124-z__Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi:10.1007/s11740-022-01124-z .

C. Zirngibl, B. Schleich, and S. Wartzack, “Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels,”10.3390/ai3040059__AI, vol. 3, no. 4, pp. 990–1006, 2022, doi:10.3390/ai3040059 .

M. Meyer, T. Fichtler, C. Koldewey, and R. Dumitrescu, “Potentials and challenges of analyzing use phase data in product planning of manufacturing companies,”10.1017/s0890060421000408__Artificial Intelligence for Engineering Design, Analysis and Manufacturing, vol. 36, Art. no. e14, 2022, doi:10.1017/s0890060421000408 .

D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein, “Robustness Analysis of Pin Joining,”10.3390/jmmp6050122__Journal of Manufacturing and Materials Processing, vol. 6, no. 5, Art. no. 122, 2022, doi:10.3390/jmmp6050122 .

A. Borowski, B. Gröger, R. Füßel, and M. Gude, “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions,”10.3390/jmmp6060146__Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 146, 2022, doi:10.3390/jmmp6060146 .

D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, and M. Merklein, “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution,”10.3390/jmmp6060127__Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 127, 2022, doi:10.3390/jmmp6060127 .

J. Schaude and T. Hausotte, “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation,”10.1007/s41871-022-00143-9__Nanomanufacturing and Metrology, vol. 5, no. 2, pp. 139–148, 2022, doi:10.1007/s41871-022-00143-9 .

C. Zirngibl, B. Schleich, and S. Wartzack, “Robust estimation of clinch joint characteristics based on data-driven methods,”10.1007/s00170-022-10441-7__The International Journal of Advanced Manufacturing Technology, 2022, doi:10.1007/s00170-022-10441-7 .

M. Ott, N. Meihöfener, and R. Koch, “Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien,”10.48447/ADD-2022-014__in Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, Berlin, 2022, vol. 7, pp. 91–106, doi:10.48447/ADD-2022-014 .

G. Meschut, M. Merklein, A. Brosius, and M. Bobbert, “Mechanical joining in versatile process chains,”10.1007/s11740-022-01125-y__Production Engineering, vol. 16, no. 2–3, pp. 187–191, 2022, doi:10.1007/s11740-022-01125-y .

F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, and G. Meschut, “Joining of multi-material structures using a versatile self-piercing riveting process,”10.1007/s11740-022-01151-w__Production Engineering, 2022, doi:10.1007/s11740-022-01151-w .

C. Zirngibl et al., “Provision of cross-domain knowledge in mechanical joining using ontologies,”10.1007/s11740-022-01117-y__Production Engineering, 2022, doi:10.1007/s11740-022-01117-y .

F. Kappe, C. Zirngibl, B. Schleich, M. Bobbert, S. Wartzack, and G. Meschut, “Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods,”10.1016/j.jmapro.2022.11.019__Journal of Manufacturing Processes, vol. 84, pp. 1438–1448, 2022, doi:10.1016/j.jmapro.2022.11.019 .

A. Paul et al., “Impact of aging on the energy efficiency of household refrigerating appliances,”10.1016/j.applthermaleng.2021.117992__Applied Thermal Engineering, vol. 205, Art. no. 117992, 2022, doi:10.1016/j.applthermaleng.2021.117992 .

D. Dai, E. Y. Kenig, and R. Numrich, “Experimentelle Untersuchung der Tropfenkondensation am chemisch modifizierten EdelstahlDrallrohr,”10.1002/cite.202100176__Chemie Ingenieur Technik, vol. 94, no. 6, pp. 905–911, 2022, doi:10.1002/cite.202100176 .

M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi:10.1016/j.ijfatigue.2022.107235 .

M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi:10.1016/j.ijfatigue.2022.107235 .

M. Wende, C. Staggenborg, and E. Y. Kenig, “Modelling and simulation of zero-gravity distillation units with metal foams,”10.1016/j.ces.2021.117097__Chemical Engineering Science, vol. 247, Art. no. 117097, 2022, doi:10.1016/j.ces.2021.117097 .

L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,”10.1007/s11740-022-01124-z__Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi:10.1007/s11740-022-01124-z .

S. Martin, C. R. Bielak, M. Bobbert, T. Tröster, and G. Meschut, “Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area,”10.1007/s11740-021-01103-w__Production Engineering, 2022, doi:10.1007/s11740-021-01103-w .

R. Bertling, M. Hack, I. Ausner, B. Horschitz, S. A. Bernemann, and E. Kenig, “Modelling film and rivulet flows on microstructured surfaces using CFD methods,”10.1016/j.ces.2021.117414__Chemical Engineering Science, vol. 251, Art. no. 117414, 2022, doi:10.1016/j.ces.2021.117414 .

R. Bertling, M. Hack, I. Ausner, B. Horschitz, S. Bernemann, and E. Y. Kenig, “Modelling film and rivulet flows on microstructured surfaces using CFD methods,”10.1016/j.ces.2021.117414__Chemical Engineering Science, vol. 251, Art. no. 117414, 2022, doi:10.1016/j.ces.2021.117414 .

F. Herrmann, M. Grünewald, T. Meijer, U. Gardemann, L. Feierabend, and J. Riese, “Operating window and flexibility of a lab-scale methanation plant,”10.1016/j.ces.2022.117632__Chemical Engineering Science, vol. 254, Art. no. 117632, 2022, doi:10.1016/j.ces.2022.117632 .

J. Riese, A. Reitze, and M. Grünewald, “Experimental Characterization of 3D Printed Structured Metal Packing with an Enclosed Column Wall,”10.1002/cite.202200002__Chemie Ingenieur Technik, vol. 94, no. 7, pp. 993–1001, 2022, doi:10.1002/cite.202200002 .

F. Herrmann, M. Grünewald, T. Meijer, U. Gardemann, and J. Riese, “Performance of a Laboratory-Scale Methanation Plant with Catalyst Dilution under Dynamic Operating Conditions,”10.1021/acs.iecr.2c00871__Industrial &;amp; Engineering Chemistry Research, vol. 61, no. 27, pp. 9644–9657, 2022, doi:10.1021/acs.iecr.2c00871 .

A. J. S. Al-Lami, E. Y. Kenig, and V. Inguva, “Numerical analysis of conjugate heat transfer within internally channeled tubes,”10.1016/j.applthermaleng.2022.119596__Applied Thermal Engineering, vol. 223, Art. no. 119596, 2022, doi:10.1016/j.applthermaleng.2022.119596 .

M. Neuser, O. Grydin, Y. Frolov, and M. Schaper, “Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg,”10.1007/s11740-022-01106-1__Production Engineering, 2022, doi:10.1007/s11740-022-01106-1 .

M. Tavana, H. Kian, A. K. Nasr, K. Govindan, and H. Mina, “A comprehensive framework for sustainable closed-loop supply chain network design,”10.1016/j.jclepro.2021.129777__Journal of Cleaner Production, vol. 332, Art. no. 129777, 2022, doi:10.1016/j.jclepro.2021.129777 .

A. Ebadi Torkayesh, M. Tavana, and F. J. Santos-Arteaga, “A multi-distance interval-valued neutrosophic approach for social failure detection in sustainable municipal waste management,”10.1016/j.jclepro.2022.130409__Journal of Cleaner Production, vol. 336, Art. no. 130409, 2022, doi:10.1016/j.jclepro.2022.130409 .

S. Urbanek et al., “Design and Experimental Investigation of an Additively Manufactured PMSM Rotor,”10.1109/IEMDC47953.2021.9449566__Connecticut, USA, 2021, doi:10.1109/IEMDC47953.2021.9449566 .

E. Zhuravlev et al., “Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry,”10.1016/j.matdes.2021.109677__Materials &; Design, Art. no. 109677, 2021, doi:10.1016/j.matdes.2021.109677 .

A. Schulz, C. Wecker, V. Inguva, A. S. Lopatin, and E. Y. Kenig, “A PLIC-based method for species mass transfer at free fluid interfaces,”10.1016/j.ces.2021.117357__Chemical Engineering Science, vol. 251, Art. no. 117357, 2021, doi:10.1016/j.ces.2021.117357 .

M. Otroshi, G. Meschut, and A. Nesakumar, “The influence of manufacturing processes and optical measurement methods on the damage behavior of LAD micro-alloyed steels,”https://doi.org/10.37255/jme.v16i3pp070-076__Journal of Manufacturing Engineering, vol. 16, no. 3, pp. 70–76, 2021, doi:https://doi.org/10.37255/jme.v16i3pp070-076 .

D. Weiß, B. Schramm, and G. Kullmer, “Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens,”10.1007/s11740-021-01096-6__Production Engineering, 2021, doi:10.1007/s11740-021-01096-6 .

K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, and M. Schaper, “Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior,”10.1108/rpj-01-2021-0017__Rapid Prototyping Journal, vol. 28, no. 5, pp. 833–840, 2021, doi:10.1108/rpj-01-2021-0017 .

S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,”10.1016/j.ijfatigue.2021.106498__International Journal of Fatigue, vol. 153, Art. no. 106498, 2021, doi:10.1016/j.ijfatigue.2021.106498 .

S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,”10.1016/j.addma.2021.102087__Additive Manufacturing, vol. 46, Art. no. 102087, 2021, doi:10.1016/j.addma.2021.102087 .

J. Hu et al., “A universal electrochemical activation enabling lattice oxygen activation in nickel-based catalyst for efficient water oxidation,”10.1016/j.cej.2021.132736__Chemical Engineering Journal, vol. 430, Art. no. 132736, 2021, doi:10.1016/j.cej.2021.132736 .

D. Han, K. Yang, and G. Meschut, “Mechanical joining of glass fibre reinforced polymer (GFRP) through an innovative solid self-piercing rivet,”10.1016/j.jmatprotec.2021.117182__Journal of Materials Processing Technology, vol. 296, Art. no. 117182, 2021, doi:10.1016/j.jmatprotec.2021.117182 .

B. Gröger et al., “Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets,”10.1007/s11740-021-01091-x__Production Engineering, vol. 16, no. 2–3, pp. 203–212, 2021, doi:10.1007/s11740-021-01091-x .

A. Reitze, M. Grünewald, and J. Riese, “Concept of a Flexible WettedWall Column for the Distillation of Specialty Chemicals,”10.1002/ceat.202000468__Chemical Engineering &;amp; Technology, vol. 44, no. 7, pp. 1327–1335, 2021, doi:10.1002/ceat.202000468 .

A. Reitze, M. Grünewald, and J. Riese, “Characterization of Liquid-Phase Distribution in 3D Printed Structured Packings with an Enclosed Column Wall,”10.1021/acs.iecr.1c03931__Industrial &;amp; Engineering Chemistry Research, vol. 61, no. 1, pp. 740–746, 2021, doi:10.1021/acs.iecr.1c03931 .

B. Bruns, A. Di Pretoro, M. Grünewald, and J. Riese, “Flexibility analysis for demand-side management in large-scale chemical processes: An ethylene oxide production case study,”10.1016/j.ces.2021.116779__Chemical Engineering Science, vol. 243, Art. no. 116779, 2021, doi:10.1016/j.ces.2021.116779 .

B. Bruns, A. Di Pretoro, M. Grünewald, and J. Riese, “Indirect Demand Response Potential of Large-Scale Chemical Processes,”10.1021/acs.iecr.1c03925__Industrial &;amp; Engineering Chemistry Research, vol. 61, no. 1, pp. 605–620, 2021, doi:10.1021/acs.iecr.1c03925 .

B. Bruns, F. Herrmann, M. Grünewald, and J. Riese, “Dynamic Design Optimization for Flexible Process Equipment,”10.1021/acs.iecr.1c00306__Industrial &;amp; Engineering Chemistry Research, vol. 60, no. 20, pp. 7678–7688, 2021, doi:10.1021/acs.iecr.1c00306 .

B. Bruns, T. Becker, J. Riese, S. Lier, and B. Werners, “Efficient Production of Specialized Polymers with Highly Flexible SmallScale Plants,”10.1002/ceat.202000591__Chemical Engineering &;amp; Technology, vol. 44, no. 6, pp. 1148–1152, 2021, doi:10.1002/ceat.202000591 .

H. Fasel, N. Darvishsefat, J. Riese, and M. Grünewald, “Experimentelle Untersuchungen zum Tropfenmitriss im Feedeinleitbereich von Destillationskolonnen,”10.1002/cite.202000242__Chemie Ingenieur Technik, vol. 93, no. 7, pp. 1100–1106, 2021, doi:10.1002/cite.202000242 .

D. Beverungen, D. Kundisch, and N. Wünderlich, “Transforming into a Platform Provider: Strategic Options for Industrial Smart Service Providers,”10.1108/JOSM-03-2020-0066__Journal of Service Management, vol. 32, no. 4, pp. 507–532, 2021, doi:10.1108/JOSM-03-2020-0066 .

D. Ahlers, Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V , vol. 19. Shaker, 2020.

C.-J. Haake and W. Trockel, “Introduction to the Special Issue ‘Bargaining,’”10.1007/s41412-020-00104-x__Homo Oeconomicus, vol. 37, no. 1–2, pp. 1–6, 2020, doi:10.1007/s41412-020-00104-x .

M. Schulze Darup, “Encrypted polynomial control based on tailored twoparty computation,”10.1002/rnc.5003__International Journal of Robust and Nonlinear Control, vol. 30, no. 11, pp. 4168–4187, 2020, doi:10.1002/rnc.5003 .

J. Lu, A. S. Leong, and D. E. Quevedo, “Optimal eventtriggered transmission scheduling for privacypreserving wireless state estimation,”10.1002/rnc.4910__International Journal of Robust and Nonlinear Control, vol. 30, no. 11, pp. 4205–4224, 2020, doi:10.1002/rnc.4910 .

M. Gonchikzhapov and T. Kasper, “Decomposition Reactions of Fe(CO)<sub>5</sub>, Fe(C<sub>5</sub>H<sub>5</sub>)<sub>2</sub>, and TTIP as Precursors for the Spray-Flame Synthesis of Nanoparticles in Partial Spray Evaporation at Low Temperatures,”10.1021/acs.iecr.9b06667__Industrial &;amp; Engineering Chemistry Research, vol. 59, no. 18, pp. 8551–8561, 2020, doi:10.1021/acs.iecr.9b06667 .

Y. Pan, H. Ren, R. Chen, Y. Wu, and D. Chu, “Enhanced electrocatalytic oxygen evolution by manipulation of electron transfer through cobalt-phosphorous bridging,”10.1016/j.cej.2020.125660__Chemical Engineering Journal, vol. 398, Art. no. 125660, 2020, doi:10.1016/j.cej.2020.125660 .

J. Riese, A. Hoff, J. Stock, A. Górak, and M. Grünewald, “Separation Units 4.0 – Trennapparate heute und morgen,”10.1002/cite.202000032__Chemie Ingenieur Technik, vol. 92, no. 7, pp. 818–830, 2020, doi:10.1002/cite.202000032 .

M. Pannok, M. Finkbeiner, H. Fasel, J. Riese, and S. Lier, “Transformable Decentral Production for Local Economies with Minimized Carbon Footprint,”10.1002/cben.202000008__ChemBioEng Reviews, vol. 7, no. 6, pp. 216–228, 2020, doi:10.1002/cben.202000008 .

M. Finkbeiner, M. Pannok, H. Fasel, J. Riese, and S. Lier, “Modular Production with BioBased Resources in a Decentral Production Network,”10.1002/cite.202000072__Chemie Ingenieur Technik, vol. 92, no. 12, pp. 2041–2045, 2020, doi:10.1002/cite.202000072 .

A. Reitze, M. Grünewald, and J. Riese, “Comparison of the Operating Range of a WettedWall Column with a Packed Column for Distillation,”10.1002/cite.202000065__Chemie Ingenieur Technik, vol. 92, no. 12, pp. 1968–1975, 2020, doi:10.1002/cite.202000065 .

H. Fasel, M. Grünewald, and J. Riese, “New Column Design to Enhance Flexibility: Concept for Hydrodynamic Characterization,”10.1002/cite.202000055__Chemie Ingenieur Technik, vol. 92, no. 12, pp. 2035–2040, 2020, doi:10.1002/cite.202000055 .

F. Herrmann, M. Grünewald, and J. Riese, “Flexibility of PowertoGas Plants: A Case Study,”10.1002/cite.202000063__Chemie Ingenieur Technik, vol. 92, no. 12, pp. 1983–1991, 2020, doi:10.1002/cite.202000063 .

J. Riese and M. Grünewald, “Challenges and Opportunities to Enhance Flexibility in Design and Operation of Chemical Processes,”10.1002/cite.202000057__Chemie Ingenieur Technik, vol. 92, no. 12, pp. 1887–1897, 2020, doi:10.1002/cite.202000057 .

B. Bruns, M. Grünewald, and J. Riese, “Analysis of Capacity Potentials in Continuously Operated Chemical Processes,”10.1002/cite.202000053__Chemie Ingenieur Technik, vol. 92, no. 12, pp. 2005–2015, 2020, doi:10.1002/cite.202000053 .

S. Josupeit, On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process, vol. 11. Düren: Shaker Verlag GmbH, 2019.

S. B. Schneider, M. Peuster, D. Behnke, M. Marcel, P.-B. Bök, and H. Karl, “Putting 5G into Production: Realizing a Smart Manufacturing Vertical Scenario,” in European Conference on Networks and Communications (EuCNC), 2019.

S. B. Schneider et al., “‘Producing Cloud-Native’: Smart Manufacturing Use Cases on Kubernetes,” in IEEE Conference on Network Function Virtualization and Software Defined Networks (NFV-SDN) Demo Track, Dallas, TX, USA, 2019.

P. Fanasch and B. Frick, “The value of signals: Do self-declaration and certification generate price premiums for organic and biodynamic wines?,”10.1016/j.jclepro.2019.119415__Journal of Cleaner Production, vol. 249, Art. no. 119415, 2019, doi:10.1016/j.jclepro.2019.119415 .

C. Stegehake, J. Riese, and M. Grünewald, “Modeling and Validating FixedBed Reactors: A StateoftheArt Review,”10.1002/cben.201900002__ChemBioEng Reviews, vol. 6, no. 2, pp. 28–44, 2019, doi:10.1002/cben.201900002 .

F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with10.1007/s40964-018-0044-4__layers,”10.1007/s40964-018-0044-4__Progress in Additive Manufacturing, vol. 3, no. 4, pp. 221–231, 2018, doi:10.1007/s40964-018-0044-4 .

Z. Wang, D. Reimsbach, and G. Braam, “Political embeddedness and the diffusion of corporate social responsibility practices in China: A trade-off between financial and CSR performance?,”10.1016/j.jclepro.2018.07.116__Journal of Cleaner Production, vol. 198, pp. 1185–1197, 2018, doi:10.1016/j.jclepro.2018.07.116 .

H. Dunkelberg et al., “Optimization of the energy supply in the plastics industry to reduce the primary energy demand,”10.1016/j.jclepro.2018.04.254__Journal of Cleaner Production, vol. 192, pp. 790–800, 2018, doi:10.1016/j.jclepro.2018.04.254 .

C. Stegehake, J. Riese, and M. Grünewald, “Modeling and Validating FixedBed Reactors: A StateoftheArt Review,”10.1002/cite.201800130__Chemie Ingenieur Technik, vol. 90, no. 11, pp. 1739–1758, 2018, doi:10.1002/cite.201800130 .

H. R. Rakesh Ranga et al., “Investigation of the structure and spread rate of flames over PMMA slabs,”10.1016/j.applthermaleng.2017.11.041__Applied Thermal Engineering, vol. 130, pp. 477–491, 2017, doi:10.1016/j.applthermaleng.2017.11.041 .

H. R. Rakesh Ranga et al., “Investigation of the structure and spread rate of flames over PMMA slabs,”10.1016/j.applthermaleng.2017.11.041__Applied Thermal Engineering, vol. 130, pp. 477–491, 2017, doi:10.1016/j.applthermaleng.2017.11.041 .

F. H. Dubberke et al., “Experimental setup of a cascaded two-stage organic Rankine cycle,”10.1016/j.applthermaleng.2017.11.137__Applied Thermal Engineering, vol. 131, pp. 958–964, 2017, doi:10.1016/j.applthermaleng.2017.11.137 .

S. Lier et al., “Innovative scaling strategies for a fast development of apparatuses by modular process engineering,”10.1016/j.cep.2017.10.026__Chemical Engineering and Processing - Process Intensification, vol. 123, pp. 111–125, 2017, doi:10.1016/j.cep.2017.10.026 .