M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi:10.1016/j.ijfatigue.2022.107235 .
LibreCat: /record/41496
DOI: 10.1016/j.ijfatigue.2022.107235

M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi:10.1016/j.ijfatigue.2022.107235 .
LibreCat: /record/41490
DOI: 10.1016/j.ijfatigue.2022.107235

M. Wende, C. Staggenborg, and E. Y. Kenig, “Modelling and simulation of zero-gravity distillation units with metal foams,”10.1016/j.ces.2021.117097__Chemical Engineering Science, vol. 247, Art. no. 117097, 2022, doi:10.1016/j.ces.2021.117097 .
LibreCat: /record/44236
DOI: 10.1016/j.ces.2021.117097

L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,”10.1007/s11740-022-01124-z__Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi:10.1007/s11740-022-01124-z .
LibreCat: /record/30963
DOI: 10.1007/s11740-022-01124-z

S. Martin, C. R. Bielak, M. Bobbert, T. Tröster, and G. Meschut, “Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area,”10.1007/s11740-021-01103-w__Production Engineering, 2022, doi:10.1007/s11740-021-01103-w .
LibreCat: /record/29951
DOI: 10.1007/s11740-021-01103-w

R. Bertling, M. Hack, I. Ausner, B. Horschitz, S. A. Bernemann, and E. Kenig, “Modelling film and rivulet flows on microstructured surfaces using CFD methods,”10.1016/j.ces.2021.117414__Chemical Engineering Science, vol. 251, Art. no. 117414, 2022, doi:10.1016/j.ces.2021.117414 .
LibreCat: /record/30591
DOI: 10.1016/j.ces.2021.117414

R. Bertling, M. Hack, I. Ausner, B. Horschitz, S. Bernemann, and E. Y. Kenig, “Modelling film and rivulet flows on microstructured surfaces using CFD methods,”10.1016/j.ces.2021.117414__Chemical Engineering Science, vol. 251, Art. no. 117414, 2022, doi:10.1016/j.ces.2021.117414 .
LibreCat: /record/30382
DOI: 10.1016/j.ces.2021.117414

F. Herrmann, M. Grünewald, T. Meijer, U. Gardemann, L. Feierabend, and J. Riese, “Operating window and flexibility of a lab-scale methanation plant,”10.1016/j.ces.2022.117632__Chemical Engineering Science, vol. 254, Art. no. 117632, 2022, doi:10.1016/j.ces.2022.117632 .
LibreCat: /record/47562
DOI: 10.1016/j.ces.2022.117632

J. Riese, A. Reitze, and M. Grünewald, “Experimental Characterization of 3D Printed Structured Metal Packing with an Enclosed Column Wall,”10.1002/cite.202200002__Chemie Ingenieur Technik, vol. 94, no. 7, pp. 993–1001, 2022, doi:10.1002/cite.202200002 .
LibreCat: /record/47561
DOI: 10.1002/cite.202200002

F. Herrmann, M. Grünewald, T. Meijer, U. Gardemann, and J. Riese, “Performance of a Laboratory-Scale Methanation Plant with Catalyst Dilution under Dynamic Operating Conditions,”10.1021/acs.iecr.2c00871__Industrial &;amp; Engineering Chemistry Research, vol. 61, no. 27, pp. 9644–9657, 2022, doi:10.1021/acs.iecr.2c00871 .
LibreCat: /record/47556
DOI: 10.1021/acs.iecr.2c00871

A. J. S. Al-Lami, E. Y. Kenig, and V. Inguva, “Numerical analysis of conjugate heat transfer within internally channeled tubes,”10.1016/j.applthermaleng.2022.119596__Applied Thermal Engineering, vol. 223, Art. no. 119596, 2022, doi:10.1016/j.applthermaleng.2022.119596 .
LibreCat: /record/40644
DOI: 10.1016/j.applthermaleng.2022.119596

M. Neuser, O. Grydin, Y. Frolov, and M. Schaper, “Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg,”10.1007/s11740-022-01106-1__Production Engineering, 2022, doi:10.1007/s11740-022-01106-1 .
LibreCat: /record/29505
DOI: 10.1007/s11740-022-01106-1

M. Tavana, H. Kian, A. K. Nasr, K. Govindan, and H. Mina, “A comprehensive framework for sustainable closed-loop supply chain network design,”10.1016/j.jclepro.2021.129777__Journal of Cleaner Production, vol. 332, Art. no. 129777, 2022, doi:10.1016/j.jclepro.2021.129777 .
LibreCat: /record/53237
DOI: 10.1016/j.jclepro.2021.129777

A. Ebadi Torkayesh, M. Tavana, and F. J. Santos-Arteaga, “A multi-distance interval-valued neutrosophic approach for social failure detection in sustainable municipal waste management,”10.1016/j.jclepro.2022.130409__Journal of Cleaner Production, vol. 336, Art. no. 130409, 2022, doi:10.1016/j.jclepro.2022.130409 .
LibreCat: /record/53242
DOI: 10.1016/j.jclepro.2022.130409

S. Urbanek et al., “Design and Experimental Investigation of an Additively Manufactured PMSM Rotor,”10.1109/IEMDC47953.2021.9449566__Connecticut, USA, 2021, doi:10.1109/IEMDC47953.2021.9449566 .
LibreCat: /record/24426
DOI: 10.1109/IEMDC47953.2021.9449566

E. Zhuravlev et al., “Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry,”10.1016/j.matdes.2021.109677__Materials &; Design, Art. no. 109677, 2021, doi:10.1016/j.matdes.2021.109677 .
LibreCat: /record/24589
DOI: 10.1016/j.matdes.2021.109677

A. Schulz, C. Wecker, V. Inguva, A. S. Lopatin, and E. Y. Kenig, “A PLIC-based method for species mass transfer at free fluid interfaces,”10.1016/j.ces.2021.117357__Chemical Engineering Science, vol. 251, Art. no. 117357, 2021, doi:10.1016/j.ces.2021.117357 .
LibreCat: /record/30864
DOI: 10.1016/j.ces.2021.117357

M. Otroshi, G. Meschut, and A. Nesakumar, “The influence of manufacturing processes and optical measurement methods on the damage behavior of LAD micro-alloyed steels,”https://doi.org/10.37255/jme.v16i3pp070-076__Journal of Manufacturing Engineering, vol. 16, no. 3, pp. 70–76, 2021, doi:https://doi.org/10.37255/jme.v16i3pp070-076 .
LibreCat: /record/25476
DOI: https://doi.org/10.37255/jme.v16i3pp070-076

D. Weiß, B. Schramm, and G. Kullmer, “Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens,”10.1007/s11740-021-01096-6__Production Engineering, 2021, doi:10.1007/s11740-021-01096-6 .
LibreCat: /record/30674
DOI: 10.1007/s11740-021-01096-6

K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, and M. Schaper, “Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior,”10.1108/rpj-01-2021-0017__Rapid Prototyping Journal, vol. 28, no. 5, pp. 833–840, 2021, doi:10.1108/rpj-01-2021-0017 .
LibreCat: /record/41507
DOI: 10.1108/rpj-01-2021-0017