Meschut, G., M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.”https://doi.org/10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100113 .
LibreCat: /record/32275
DOI: 10.1016/j.jajp.2022.100113

Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”https://doi.org/10.4028/p-1n6741__Key Engineering Materials 926 (2022): 1468–78.https://doi.org/10.4028/p-1n6741 .
LibreCat: /record/37647
DOI: 10.4028/p-1n6741

Schramm, Britta, Sven Harzheim, Deborah Weiß, Tintu David Joy, Martin Hofmann, Julia Mergheim, and Thomas Wallmersperger. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.”https://doi.org/10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, 2022.https://doi.org/10.1016/j.jajp.2022.100135 .
LibreCat: /record/34070
DOI: 10.1016/j.jajp.2022.100135

Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “Development of a Method for the Separate Measurement of the Growth of Internal Crack Tips by Means of the Potential Drop Method.”https://doi.org/10.1016/j.engfracmech.2022.108899__Engineering Fracture Mechanics, 2022.https://doi.org/10.1016/j.engfracmech.2022.108899 .
LibreCat: /record/34246
DOI: 10.1016/j.engfracmech.2022.108899

Ju, X., Rolf Mahnken, Y. Xu, and L. Liang. “NTFA-Enabled Goal-Oriented Adaptive Space–Time Finite Elements for Micro-Heterogeneous Elastoplasticity Problems.”https://doi.org/10.1016/j.cma.2022.115199__Computer Methods in Applied Mechanics and Engineering 398 (2022).https://doi.org/10.1016/j.cma.2022.115199 .
LibreCat: /record/32592
DOI: 10.1016/j.cma.2022.115199

Mahnken, Rolf. “New Low Order Runge–Kutta Schemes for Asymptotically Exact Global Error Estimation of Embedded Methods without Order Reduction.”https://doi.org/10.1016/j.cma.2022.115553__Computer Methods in Applied Mechanics and Engineering 401 (2022).https://doi.org/10.1016/j.cma.2022.115553 .
LibreCat: /record/33801
DOI: 10.1016/j.cma.2022.115553

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.”https://doi.org/10.4028/p-3rk19y__Key Engineering Materials 926 (2022): 683–89.https://doi.org/10.4028/p-3rk19y .
LibreCat: /record/32412
DOI: 10.4028/p-3rk19y

Schramm, Britta, and Deborah Weiß. “Fracture Mechanical Evaluation of the Material HX.”https://doi.org/10.1515/mt-2022-0191__Materials Testing 64, no. 10 (2022): 1437–49.https://doi.org/10.1515/mt-2022-0191 .
LibreCat: /record/34403
DOI: 10.1515/mt-2022-0191

Voswinkel, Dietrich, Jan Andre Striewe, Olexandr Grydin, Dennis Meinderink, Guido Grundmeier, Mirko Schaper, and Thomas Tröster. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.”https://doi.org/10.1080/09243046.2022.2143746__Advanced Composite Materials, 2022, 1–16.https://doi.org/10.1080/09243046.2022.2143746 .
LibreCat: /record/34097
DOI: 10.1080/09243046.2022.2143746

Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-Mechanical Processing of a Press Hardening Steel.”https://doi.org/10.1007/s11661-022-06732-z__Metallurgical and Materials Transactions A 53, no. 8 (2022): 3125–42.https://doi.org/10.1007/s11661-022-06732-z .
LibreCat: /record/36327
DOI: 10.1007/s11661-022-06732-z

Slapáková, Michaela, Barbora Kivská, Klaudia Fekete, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “The Influence of Surface on Direction of Diffusion in Al-Fe Clad Material.”https://doi.org/10.1016/j.matchar.2022.112005__Materials Characterization 190 (2022).https://doi.org/10.1016/j.matchar.2022.112005 .
LibreCat: /record/36328
DOI: 10.1016/j.matchar.2022.112005

Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Influence of Thermomechanical Processing on the Microstructural and Mechanical Properties of Steel 22Mn.”https://doi.org/10.1016/j.msea.2022.142780__Materials Science and Engineering: A 838 (2022).https://doi.org/10.1016/j.msea.2022.142780 .
LibreCat: /record/29811
DOI: 10.1016/j.msea.2022.142780

Tillmann, Wolfgang, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Maxwell Hein, Kay-Peter Hoyer, Mirko Schaper, Daria Gödecke, Hilke Oltmanns, and Jessica Meißner. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.”https://doi.org/10.1016/j.matlet.2022.132384__Materials Letters, 2022.https://doi.org/10.1016/j.matlet.2022.132384 .
LibreCat: /record/31076
DOI: 10.1016/j.matlet.2022.132384

Hein, Maxwell, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.”https://doi.org/10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue 166 (2022).https://doi.org/10.1016/j.ijfatigue.2022.107235 .
LibreCat: /record/41496
DOI: 10.1016/j.ijfatigue.2022.107235

Pramanik, Sudipta, Dennis Milaege, Kay-Peter Hoyer, and Mirko Schaper. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.”https://doi.org/10.1016/j.msea.2022.143887__Materials Science and Engineering: A 854 (2022).https://doi.org/10.1016/j.msea.2022.143887 .
LibreCat: /record/41495
DOI: 10.1016/j.msea.2022.143887

Tillmann, Wolfgang, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Maxwell Hein, Kay-Peter Hoyer, Mirko Schaper, Daria Gödecke, Hilke Oltmanns, and Jessica Meißner. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.”https://doi.org/10.1016/j.matlet.2022.132384__Materials Letters 321 (2022).https://doi.org/10.1016/j.matlet.2022.132384 .
LibreCat: /record/41501
DOI: 10.1016/j.matlet.2022.132384

Pramanik, Sudipta, Dennis Milaege, Kay-Peter Hoyer, and Mirko Schaper. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.”https://doi.org/10.1016/j.msea.2022.143887__Materials Science and Engineering: A 854 (2022).https://doi.org/10.1016/j.msea.2022.143887 .
LibreCat: /record/41491
DOI: 10.1016/j.msea.2022.143887

Hein, Maxwell, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.”https://doi.org/10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue 166 (2022).https://doi.org/10.1016/j.ijfatigue.2022.107235 .
LibreCat: /record/41490
DOI: 10.1016/j.ijfatigue.2022.107235

Schramm, Britta, Sven Martin, Christian Steinfelder, Christian Roman Bielak, Alexander Brosius, Gerson Meschut, Thomas Tröster, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.”https://doi.org/10.1016/j.jajp.2022.100133__Journal of Advanced Joining Processes 6 (2022).https://doi.org/10.1016/j.jajp.2022.100133 .
LibreCat: /record/34069
DOI: 10.1016/j.jajp.2022.100133

Schramm, Britta, Johannes Friedlein, Benjamin Gröger, Christian Roman Bielak, Mathias Bobbert, Maik Gude, Gerson Meschut, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.”https://doi.org/10.1016/j.jajp.2022.100134__Journal of Advanced Joining Processes, 2022.https://doi.org/10.1016/j.jajp.2022.100134 .
LibreCat: /record/34068
DOI: 10.1016/j.jajp.2022.100134