Riedl, Thomas, et al. “SizeDependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars.”10.1002/admi.202102159__Advanced Materials Interfaces, vol. 9, no. 11, 2102159, Wiley, 2022, doi:10.1002/admi.202102159.

Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.”10.4028/p-5d009y__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1516–26, doi:10.4028/p-5d009y.

Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.”10.4028/p-wpuzyw__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:10.4028/p-wpuzyw.

Schmelzle, Lars, et al. “Testing, Modelling, and Parameter Identification for Adhesively Bonded Joints under the Influence of Temperature.”10.1080/01694243.2022.2125714__Journal of Adhesion Science and Technology, 2022, doi:10.1080/01694243.2022.2125714.

Henkes, Alexander, et al. “Physics Informed Neural Networks for Continuum Micromechanics.”10.1016/j.cma.2022.114790__Computer Methods in Applied Mechanics and Engineering, vol. 393, 114790, Elsevier BV, 2022, doi:10.1016/j.cma.2022.114790.

Odziomek, Mateusz, et al. “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor.”10.1002/adma.202206405__Advanced Materials, vol. 34, no. 40, 2206405, Wiley, 2022, doi:10.1002/adma.202206405.

Jerigová, Mária, et al. “C            <sub>1</sub>            N            <sub>1</sub>            Thin Films from Guanine Decomposition Fragments.”10.1002/admi.202202061__Advanced Materials Interfaces, 2202061, Wiley, 2022, doi:10.1002/admi.202202061.

Odziomek, Mateusz, et al. “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor.”10.1002/adma.202206405__Advanced Materials, vol. 34, no. 40, 2206405, Wiley, 2022, doi:10.1002/adma.202206405.

Weinberger, Christian, et al. “The Structure of Water in Silica Mesopores – Influence of the Pore Wall Polarity.”10.1002/admi.202200245__Advanced Materials Interfaces, vol. 9, no. 20, 2200245, Wiley, 2022, doi:10.1002/admi.202200245.

Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.

Meschut, G., et al. “Review on Mechanical Joining by Plastic Deformation.”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.

Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”10.4028/p-1n6741__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1468–78, doi:10.4028/p-1n6741.

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.”10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, 100135, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100135.

Kullmer, Gunter, et al. “Development of a Method for the Separate Measurement of the Growth of Internal Crack Tips by Means of the Potential Drop Method.”10.1016/j.engfracmech.2022.108899__Engineering Fracture Mechanics, 108899, Elsevier BV, 2022, doi:10.1016/j.engfracmech.2022.108899.

Ju, X., et al. “NTFA-Enabled Goal-Oriented Adaptive Space–Time Finite Elements for Micro-Heterogeneous Elastoplasticity Problems.”10.1016/j.cma.2022.115199__Computer Methods in Applied Mechanics and Engineering, vol. 398, 115199, Elsevier BV, 2022, doi:10.1016/j.cma.2022.115199.

Mahnken, Rolf. “New Low Order Runge–Kutta Schemes for Asymptotically Exact Global Error Estimation of Embedded Methods without Order Reduction.”10.1016/j.cma.2022.115553__Computer Methods in Applied Mechanics and Engineering, vol. 401, 115553, Elsevier BV, 2022, doi:10.1016/j.cma.2022.115553.

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.”10.4028/p-3rk19y__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 683–89, doi:10.4028/p-3rk19y.

Schramm, Britta, and Deborah Weiß. “Fracture Mechanical Evaluation of the Material HX.”10.1515/mt-2022-0191__Materials Testing, vol. 64, no. 10, Walter de Gruyter GmbH, 2022, pp. 1437–49, doi:10.1515/mt-2022-0191.

Voswinkel, Dietrich, et al. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.”10.1080/09243046.2022.2143746__Advanced Composite Materials, Informa UK Limited, 2022, pp. 1–16, doi:10.1080/09243046.2022.2143746.

Reitz, Alexander, et al. “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-Mechanical Processing of a Press Hardening Steel.”10.1007/s11661-022-06732-z__Metallurgical and Materials Transactions A, vol. 53, no. 8, Springer Science and Business Media LLC, 2022, pp. 3125–42, doi:10.1007/s11661-022-06732-z.