M. Rodin, D. Helle, and D. Kuckling, “Pillar[5]arene-based dually crosslinked supramolecular gel as a sensor for the detection of adiponitrile,”10.1039/d3py01354e__Polymer Chemistry, vol. 15, no. 7, pp. 661–679, 2024, doi:10.1039/d3py01354e .

E. Penner, I. Caylak, and R. Mahnken, “Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations,”10.1007/s12221-023-00122-x__Fibers and Polymers, 2023, doi:10.1007/s12221-023-00122-x .

E. Cara et al., “Developing Quantitative Nondestructive Characterization of Nanomaterials: A Case Study on Sequential Infiltration Synthesis of Block Copolymers,”10.1021/acsapm.2c02094__ACS Applied Polymer Materials, vol. 5, no. 3, pp. 2079–2087, 2023, doi:10.1021/acsapm.2c02094 .

E. Moritzer and F. Flachmann, “Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures,”10.1177/0021955x231161175__Journal of Cellular Plastics, vol. 59, no. 3, pp. 187–199, 2023, doi:10.1177/0021955x231161175 .

E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,”10.1002/masy.202200181__Macromolecular Symposia, vol. 411, no. 1, 2023, doi:10.1002/masy.202200181 .

E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,”10.1002/masy.202200181__Macromolecular Symposia, vol. 411, no. 1, 2023, doi:10.1002/masy.202200181 .

R. Methling, O. Dückmann, F. Simon, C. WolfBrandstetter, and D. Kuckling, “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers,”10.1002/mame.202200665__Macromolecular Materials and Engineering, vol. 308, no. 8, 2023, doi:10.1002/mame.202200665 .

N. Chudalla, G. Meschut, A. Bartley, and T. M. Wibbeke, “Bauteilschonendes  Entfügen struktureller Klebverbindungen  durch Kälte,”10.1007/s35145-022-0576-0__adhäsion KLEBEN &;amp; DICHTEN, vol. 66, no. 4, pp. 34–37, 2022, doi:10.1007/s35145-022-0576-0 .

C. Hoppe et al., “Influence of surface activation on the microporosity of PECVD and PEALD SiO            <sub>              x            </sub>            thin films on PDMS,”10.1002/ppap.202100174__Plasma Processes and Polymers, vol. 19, no. 4, Art. no. 2100174, 2022, doi:10.1002/ppap.202100174 .

X. Xie, T. de los Arcos, and G. Grundmeier, “Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation,”10.1002/ppap.202200052__Plasma Processes and Polymers, vol. 19, no. 11, Art. no. 2200052, 2022, doi:10.1002/ppap.202200052 .

B. Gröger et al., “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites,”10.3390/polym14225039__Polymers, vol. 14, no. 22, Art. no. 5039, 2022, doi:10.3390/polym14225039 .

K. Völlmecke et al., “Hydrogel-Based Biosensors,”10.3390/gels8120768__Gels, vol. 8, no. 12, Art. no. 768, 2022, doi:10.3390/gels8120768 .

V. Neßlinger, S. Welzel, F. Rieker, D. Meinderink, U. Nieken, and G. Grundmeier, “Thin OrganicInorganic AntiFouling HybridFilms for Microreactor Components,”10.1002/mren.202200043__Macromolecular Reaction Engineering, Art. no. 2200043, 2022, doi:10.1002/mren.202200043 .

C. Hoppe et al., “Influence of surface activation on the microporosity of PECVD and PEALD SiO            <sub>              x            </sub>            thin films on PDMS,”10.1002/ppap.202100174__Plasma Processes and Polymers, vol. 19, no. 4, Art. no. 2100174, 2022, doi:10.1002/ppap.202100174 .

X. Xie, M. T. de los Arcos de Pedro, and G. Grundmeier, “Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation,”10.1002/ppap.202200052__Plasma Processes and Polymers, vol. 19, no. 11, Art. no. 2200052, 2022, doi:10.1002/ppap.202200052 .

A. Büngeler, F. Kollmann, K. Huber, and O. I. Strube, “Targeted Synthesis of the Type-A Particle Substructure from Enzymatically Produced Eumelanin,”10.1021/acs.biomac.1c01390__Biomacromolecules, vol. 23, no. 3, pp. 1020–1029, 2022, doi:10.1021/acs.biomac.1c01390 .

T. Schmolke, G. Meschut, D. Meinderink, F. Rieker, and G. Grundmeier, “Untersuchung von Klebverbindungen  für Batteriegehäuse,”10.1007/s35145-022-0596-9__adhäsion KLEBEN &;amp; DICHTEN, vol. 66, no. 6, pp. 40–43, 2022, doi:10.1007/s35145-022-0596-9 .

D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering with P and P on a Standard System,”10.1002/masy.202100397__Macromolecular Symposia, vol. 404, no. 1, Art. no. 2100397, 2022, doi:10.1002/masy.202100397 .

T. Schmolke, D. Teutenberg, and G. Meschut, “Development of a test method for investigating the leak tightness of hybrid joined battery housing connections,”10.1016/j.ijadhadh.2022.103171__International Journal of Adhesion and Adhesives, vol. 117, Art. no. 103171, 2022, doi:10.1016/j.ijadhadh.2022.103171 .

A. Rüppel, S. Wolff, J. P. Oldemeier, V. Schöppner, and H.-P. Heim, “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution,”10.3390/polym14153113__Polymers, vol. 14, no. 15, Art. no. 3113, 2022, doi:10.3390/polym14153113 .

M. S. A. Abdelaty and D. Kuckling, “Altering of lower critical solution temperature of environmentally responsive poly (N-isopropylacrylamide-co-acrylic acid-co-vanillin acrylate) affected by acrylic acid, vanillin acrylate, and post-polymerization modification,”10.1007/s00396-021-04882-x__Colloid and Polymer Science, vol. 299, no. 10, pp. 1617–1629, 2021, doi:10.1007/s00396-021-04882-x .

M. Chugh, M. Jain, G. Wang, A. S. Nia, H. Mirhosseini, and T. Kühne, “A combinatorial study of electrochemical anion intercalation into graphite,”10.1088/2053-1591/ac1965__Materials Research Express, vol. 8, no. 8, Art. no. 085502, 2021, doi:10.1088/2053-1591/ac1965 .

D. Hense et al., “Self-Assembled Fibrinogen Hydro- and Aerogels with Fibrin-like 3D Structures,”10.1021/acs.biomac.1c00489__Biomacromolecules, vol. 22, no. 10, pp. 4084–4094, 2021, doi:10.1021/acs.biomac.1c00489 .

M. Wagner et al., “Multiresponsive Polymer Nanoparticles Based on Disulfide Bonds,”10.1021/acs.macromol.1c00299__Macromolecules, vol. 54, no. 6, pp. 2899–2911, 2021, doi:10.1021/acs.macromol.1c00299 .

J. Damm, M. Albiez, J. Göddecke, G. Meschut, and T. Ummenhofer, “Dämpfungseigenschaften geklebter Verbindungen - Potenzialanalyse und Klebstoffcharakterisierung,”10.1007/s35145-021-0520-8__adhäsion KLEBEN &;amp; DICHTEN, vol. 65, no. 9, pp. 14–23, 2021, doi:10.1007/s35145-021-0520-8 .

Q. Zhai, Y. Pan, and L. Dai, “Carbon-Based Metal-Free Electrocatalysts: Past, Present, and Future,”10.1021/accountsmr.1c00190__Accounts of Materials Research, vol. 2, no. 12, pp. 1239–1250, 2021, doi:10.1021/accountsmr.1c00190 .

M. Wortmann et al., “The Deterioration Mechanism of Silicone Molds in Polyurethane Vacuum Casting,”10.1021/acsapm.0c00744__ACS Applied Polymer Materials, vol. 2, no. 11, pp. 4719–4732, 2020, doi:10.1021/acsapm.0c00744 .

N. Carl, S. Prévost, R. Schweins, and K. Huber, “Contrast variation of micelles composed of C+ and block copolymers of two negatively charged polyelectrolytes,”10.1007/s00396-019-04596-1__Colloid and Polymer Science, vol. 298, no. 7, pp. 663–679, 2020, doi:10.1007/s00396-019-04596-1 .

J. Ditter, T. Aubel, and G. Meschut, “Simple Determination of Fast Curing Parameters for Bonded Structures,”10.1007/s35784-020-0031-2__adhesion ADHESIVES + SEALANTS, vol. 17, no. 1, pp. 30–35, 2020, doi:10.1007/s35784-020-0031-2 .

J. Ditter, G. Meschut, and T. M. Wibbeke, “Joining and Disjoining Concepts for Adhesive Bonded Lightweight Structures,”10.1007/s35784-019-0016-1__adhesion ADHESIVES + SEALANTS, vol. 16, no. 3, pp. 12–17, 2020, doi:10.1007/s35784-019-0016-1 .

J. Li, C. Ji, X. Yu, M. Yin, and D. Kuckling, “Dually CrossLinked Supramolecular Hydrogel as Surface Plasmon Resonance Sensor for Small Molecule Detection,”10.1002/marc.201900189__Macromolecular Rapid Communications, vol. 40, no. 14, Art. no. 1900189, 2019, doi:10.1002/marc.201900189 .

X. Yu, A. Herberg, and D. Kuckling, “Azlactone-functionalized smart block copolymers for organocatalyst immobilization,”10.1016/j.eurpolymj.2019.08.034__European Polymer Journal, vol. 120, Art. no. 109207, 2019, doi:10.1016/j.eurpolymj.2019.08.034 .

J. Sun, J. Anderski, M.-T. Picker, K. Langer, and D. Kuckling, “Preparation of Light-Responsive Aliphatic Polycarbonate via Versatile Polycondensation for Controlled Degradation,”10.1002/macp.201800539__Macromolecular Chemistry and Physics, vol. 220, no. 5, Art. no. 1800539, 2019, doi:10.1002/macp.201800539 .

J. Sun, T. Rust, and D. Kuckling, “LightResponsive SerinolBased Polyurethane Nanocarrier for Controlled Drug Release,”10.1002/marc.201900348__Macromolecular Rapid Communications, vol. 40, no. 22, Art. no. 1900348, 2019, doi:10.1002/marc.201900348 .

N. Carl, S. Prévost, R. Schweins, J. E. Houston, I. Morfin, and K. Huber, “Invertible Micelles Based on Ion-Specific Interactions of Sr<sup>2+</sup> and Ba<sup>2+</sup> with Double Anionic Block Copolyelectrolytes,”10.1021/acs.macromol.9b01924__Macromolecules, vol. 52, no. 22, pp. 8759–8770, 2019, doi:10.1021/acs.macromol.9b01924 .

N. Schmidt, S. KeukerBaumann, J. Meyer, and K. Huber, “Phase Transformation Behavior of Polylactide Probed by Small Angle Light Scattering and Calorimetry,”10.1002/polb.24892__Journal of Polymer Science Part B: Polymer Physics, vol. 57, no. 22, pp. 1483–1495, 2019, doi:10.1002/polb.24892 .

J. Ditter, T. Aubel, D. Teutenberg, and G. Meschut, “Einfache Ermittlung von Schnellhärtungsparametern für elementar geklebte Strukturen,”10.1007/s35145-019-0004-2__adhäsion KLEBEN &;amp; DICHTEN, vol. 63, no. 1–2, pp. 40–45, 2019, doi:10.1007/s35145-019-0004-2 .

J. Li, X. Yu, A. Herberg, and D. Kuckling, “Biomolecule Sensor Based on AzlactoneModified Hydrogel Films,”10.1002/marc.201800674__Macromolecular Rapid Communications, vol. 40, no. 7, Art. no. 1800674, 2018, doi:10.1002/marc.201800674 .

A. I. Karpov et al., “Numerical study of polyethylene burning in counterflow: Effect of pyrolysis kinetics and composition of pyrolysis products,”10.1002/fam.2638__Fire and Materials, vol. 42, no. 7, pp. 826–833, 2018, doi:10.1002/fam.2638 .

K. Steck, C. Schmidt, and C. Stubenrauch, “The Twofold Role of 12-Hydroxyoctadecanoic Acid (12-HOA) in a Ternary Water—Surfactant—12-HOA System: Gelator and Co-Surfactant,”10.3390/gels4030078__Gels, vol. 4, no. 3, Art. no. 78, 2018, doi:10.3390/gels4030078 .

J. Vollbrecht, A. Stepen, K. Nolkemper, S. Keuker-Baumann, and H.-S. Kitzerow, “Blends of Two Perylene Derivatives: Mesogenic Properties and Application As Emitter Materials in OLEDs,”10.1134/s1811238218010095__Polymer Science, Series C, vol. 60, no. 1, pp. 48–54, 2018, doi:10.1134/s1811238218010095 .

M. Ditz, G. Meschut, R. Grothe, G. Grundmeier, M. Windoffer, and G. Kötting, “Elektrochemische Korrosionsprüfung,”10.1007/s35145-018-0052-z__adhäsion KLEBEN &;amp; DICHTEN, vol. 62, no. 7–8, pp. 32–39, 2018, doi:10.1007/s35145-018-0052-z .

S. Mailänder and G. Meschut, “Temperaturbedingte Relativverschiebung von Dickschichtklebungen,”10.1007/s35145-018-0017-2__adhäsion KLEBEN &;amp; DICHTEN, vol. 62, no. 3, pp. 12–17, 2018, doi:10.1007/s35145-018-0017-2 .

S. Mailänder and G. Meschut, “Design of elastic adhesive bonds,”10.1007/s35784-018-0011-y__ADHESION ADHESIVES&;amp;SEALANTS, vol. 15, no. 2, pp. 24–27, 2018, doi:10.1007/s35784-018-0011-y .

K. Engelkemeier, C. Mücke, K.-P. Hoyer, and M. Schaper, “Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates,”10.1007/s42114-018-0071-0__Advanced Composites and Hybrid Materials, vol. 2, no. 1, pp. 189–199, 2018, doi:10.1007/s42114-018-0071-0 .

X. Yu et al., “Synthesis of Amphiphilic Block Copolymers Based on SKA by RAFT Polymerization,”10.1002/macp.201700506__Macromolecular Chemistry and Physics, vol. 219, no. 5, Art. no. 1700506, 2017, doi:10.1002/macp.201700506 .

I. Bräunlich, C. Mair, M. Bauer, and W. Caseri, “Structural Transitions and Thermochromism of Linear Polynuclear Cobalt(II)-4-Octadecyl-1,2,4-triazole Complexes,”10.1007/s10904-016-0486-4__Journal of Inorganic and Organometallic Polymers and Materials, vol. 27, no. 3, pp. 605–611, 2017, doi:10.1007/s10904-016-0486-4 .

C. Peschel, M. Brehm, and D. Sebastiani, “Polyphilic Interactions as Structural Driving Force Investigated by Molecular Dynamics Simulation (Project 7),”10.3390/polym9090445__Polymers, vol. 9, no. 9, Art. no. 445, 2017, doi:10.3390/polym9090445 .

J. Diebler, H. Komber, L. Häußler, A. Lederer, and T. Werner, “Alkoxide-Initiated Regioselective Coupling of Carbon Disulfide and Terminal Epoxides for the Synthesis of Strongly Alternating Copolymers,”10.1021/acs.macromol.6b00728__Macromolecules, vol. 49, no. 13, pp. 4723–4731, 2016, doi:10.1021/acs.macromol.6b00728 .

A. Ezhova and K. Huber, “Contraction and Coagulation of Spherical Polyelectrolyte Brushes in the Presence of Ag<sup>+</sup>, Mg<sup>2+</sup>, and Ca<sup>2+</sup> Cations,”10.1021/acs.macromol.6b01286__Macromolecules, vol. 49, no. 19, pp. 7460–7468, 2016, doi:10.1021/acs.macromol.6b01286 .

G. Goerigk, S. Lages, and K. Huber, “Systematic Limitations in Concentration Analysis via Anomalous Small-Angle X-ray Scattering in the Small Structure Limit,”10.3390/polym8030085__Polymers, vol. 8, no. 3, Art. no. 85, 2016, doi:10.3390/polym8030085 .

G. Nordendorf, A. Hoischen, J. Schmidtke, D. Wilkes, and H.-S. Kitzerow, “Polymer-stabilized blue phases: promising mesophases for a new generation of liquid crystal displays,”10.1002/pat.3403__Polymers for Advanced Technologies, vol. 25, no. 11, pp. 1195–1207, 2014, doi:10.1002/pat.3403 .

R. Dattani et al., “Conformation and Interactions of Polystyrene and Fullerenes in Dilute to Semidilute Solutions,”10.1021/ma501015s__Macromolecules, vol. 47, no. 17, pp. 6113–6120, 2014, doi:10.1021/ma501015s .

A. Ezhova and K. Huber, “Specific Interactions of Ag<sup>+</sup> Ions with Anionic Polyacrylate Chains in Dilute Solution,”10.1021/ma501146m__Macromolecules, vol. 47, no. 22, pp. 8002–8011, 2014, doi:10.1021/ma501146m .

M. Schneider et al., “Morphology of Blends with Cross-Linked PMMA Microgels and Linear PMMA Chains,”10.1021/ma401889k__Macromolecules, vol. 46, no. 22, pp. 9091–9103, 2013, doi:10.1021/ma401889k .

S. Lages, G. Goerigk, and K. Huber, “SAXS and ASAXS on Dilute Sodium Polyacrylate Chains Decorated with Lead Ions,”10.1021/ma400427d__Macromolecules, vol. 46, no. 9, pp. 3570–3580, 2013, doi:10.1021/ma400427d .

J. P. Quiñones, K. V. Gothelf, J. Kjems, Á. M. H. Caballero, C. Schmidt, and C. P. Covas, “N,O6-partially acetylated chitosan nanoparticles hydrophobically-modified for controlled release of steroids and vitamin E,”10.1016/j.carbpol.2012.07.080__Carbohydrate Polymers, vol. 91, no. 1, pp. 143–151, 2012, doi:10.1016/j.carbpol.2012.07.080 .

J. P. Quiñones, K. V. Gothelf, J. Kjems, Á. M. H. Caballero, C. Schmidt, and C. P. Covas, “Self-assembled nanoparticles of glycol chitosan – Ergocalciferol succinate conjugate, for controlled release,”10.1016/j.carbpol.2012.02.039__Carbohydrate Polymers, vol. 88, no. 4, pp. 1373–1377, 2012, doi:10.1016/j.carbpol.2012.02.039 .

J. P. Quiñones et al., “Self-assembled nanoparticles of modified-chitosan conjugates for the sustained release of dl-;1-tocopherol,”10.1016/j.carbpol.2012.10.005__Carbohydrate Polymers, vol. 92, no. 1, pp. 856–864, 2012, doi:10.1016/j.carbpol.2012.10.005 .

M. Tang, A. Redler, D. Topgaard, C. Schmidt, and H.-S. Kitzerow, “Kinetics of the grating formation in holographic polymer-dispersed liquid crystals: NMR measurement of diffusion coefficients,”10.1007/s00396-012-2623-0__Colloid and Polymer Science, vol. 290, no. 8, pp. 751–755, 2012, doi:10.1007/s00396-012-2623-0 .

A. Redler and H.-S. Kitzerow, “Three-dimensional structure in holographic polymer-dispersed liquid crystals,”10.1002/pat.3040__Polymers for Advanced Technologies, vol. 24, no. 1, pp. 7–9, 2012, doi:10.1002/pat.3040 .

K. Huber and U. Scheler, “New experiments for the quantification of counterion condensation,”10.1016/j.cocis.2012.01.005__Current Opinion in Colloid &;amp; Interface Science, vol. 17, no. 2, pp. 64–73, 2012, doi:10.1016/j.cocis.2012.01.005 .

J. Seuring, F. M. Bayer, K. Huber, and S. Agarwal, “Upper Critical Solution Temperature of Poly(N-acryloyl glycinamide) in Water: A Concealed Property,”10.1021/ma202059t__Macromolecules, vol. 45, no. 1, pp. 374–384, 2011, doi:10.1021/ma202059t .

J. Pérez Quiñones, R. Szopko, C. Schmidt, and C. Peniche Covas, “Novel drug delivery systems: Chitosan conjugates covalently attached to steroids with potential anticancer and agrochemical activity,”10.1016/j.carbpol.2010.12.007__Carbohydrate Polymers, vol. 84, no. 3, pp. 858–864, 2010, doi:10.1016/j.carbpol.2010.12.007 .

S. Lages, R. Michels, and K. Huber, “Coil-Collapse and Coil-Aggregation due to the Interaction of Cu<sup>2+</sup> and Ca<sup>2+</sup> Ions with Anionic Polyacylate Chains in Dilute Solution,”10.1021/ma9027239__Macromolecules, vol. 43, no. 6, pp. 3027–3035, 2010, doi:10.1021/ma9027239 .

S. Lages, P. Lindner, P. Sinha, A. Kiriy, M. Stamm, and K. Huber, “Formation of Ca<sup>2+</sup>-Induced Intermediate Necklace Structures of Polyacrylate Chains,”10.1021/ma8027547__Macromolecules, vol. 42, no. 12, pp. 4288–4299, 2009, doi:10.1021/ma8027547 .

F. Graziola et al., “UV-photopolymerisation of poly(methyl methacrylate)-based inorganic–organic hybrid coatings and bulk samples reinforced with methacrylate-modified zirconium oxocluster,”10.1016/j.polymer.2008.08.005__Polymer, vol. 49, no. 20, pp. 4332–4343, 2008, doi:10.1016/j.polymer.2008.08.005 .

H. Siebert, I. Quijada-Garrido, J. Vermant, L. Noirez, W. R. Burghardt, and C. Schmidt, “Director Orientation of Nematic Side-Chain Liquid Crystalline Polymers Under Shear Flow: Comparison of a Flow-Aligning and a Non-Flow-Aligning Polysiloxane,”10.1002/macp.200700248__Macromolecular Chemistry and Physics, vol. 208, no. 19–20, pp. 2161–2172, 2007, doi:10.1002/macp.200700248 .

D. Burgemeister, T. Farrell, and C. Schmidt, “Lyotropic Lamellar Polysiloxanes with Isomeric Amphiphilic Side Chains,”10.1002/macp.200500452__Macromolecular Chemistry and Physics, vol. 207, no. 4, pp. 396–403, 2006, doi:10.1002/macp.200500452 .

F. Kleinschmidt, M. Hickl, K. Saalwächter, C. Schmidt, and H. Finkelmann, “Lamellar Liquid Single Crystal Hydrogels:  Synthesis and Investigation of Anisotropic Water Diffusion and Swelling,”10.1021/ma051479o__Macromolecules, vol. 38, no. 23, pp. 9772–9782, 2005, doi:10.1021/ma051479o .

P. Becker, H. Siebert, L. Noirez, and C. Schmidt, “Shear-Induced Order in Nematic Polymers,”10.1002/masy.200550209__Macromolecular Symposia, vol. 220, no. 1, pp. 111–122, 2005, doi:10.1002/masy.200550209 .

T. Kramer, R. Schweins, and K. Huber, “Silsesquioxane Molecules and Polystyrene Chains as a Model System for ColloidPolymer Mixtures in the Protein Limit,”10.1021/ma048766x__Macromolecules, vol. 38, no. 1, pp. 151–159, 2005, doi:10.1021/ma048766x .

T. Kramer, R. Schweins, and K. Huber, “Coil Dimensions of Polystyrene Chains in ColloidPolymer Mixtures at the Protein Limit:  A SANS Study,”10.1021/ma051308j__Macromolecules, vol. 38, no. 23, pp. 9783–9793, 2005, doi:10.1021/ma051308j .

K. Huber, “Static and dynamic scattering from block copolymeric ring molecules,”10.1021/ma00183a021__Macromolecules, vol. 21, no. 5, pp. 1305–1309, 2005, doi:10.1021/ma00183a021 .

K. Huber and W. Burchard, “Scattering behavior of wormlike star macromolecules,”10.1021/ma00198a024__Macromolecules, vol. 22, no. 8, pp. 3332–3336, 2005, doi:10.1021/ma00198a024 .

K. Huber, “Block copolymers with rigid and flexible segments,”10.1021/ma00196a037__Macromolecules, vol. 22, no. 6, pp. 2750–2755, 2005, doi:10.1021/ma00196a037 .

K. Huber, W. Burchard, and A. Z. Akcasu, “Remarks on , hydrodynamic coil expansion, and concentration dependence of the diffusion coefficient for polystyrene in toluene,”10.1021/ma00154a064__Macromolecules, vol. 18, no. 12, pp. 2743–2747, 2005, doi:10.1021/ma00154a064 .

K. Huber, S. Bantle, P. Lutz, and W. Burchard, “Hydrodynamic and thermodynamic behavior of short-chain polystyrene in toluene and cyclohexane at 34.5.degree.C,”10.1021/ma00149a017__Macromolecules, vol. 18, no. 7, pp. 1461–1467, 2005, doi:10.1021/ma00149a017 .

K. Huber, S. Bantle, W. Burchard, and L. J. Fetters, “Semidilute solutions of star branched polystyrene: a light and neutron scattering study,”10.1021/ma00159a020__Macromolecules, vol. 19, no. 5, pp. 1404–1411, 2005, doi:10.1021/ma00159a020 .

K. Huber and W. H. Stockmayer, “Osmotic second virial coefficient and two-parameter theories,”10.1021/ma00172a039__Macromolecules, vol. 20, no. 6, pp. 1400–1402, 2005, doi:10.1021/ma00172a039 .

K. Huber, W. Burchard, and L. J. Fetters, “Dynamic light scattering from regular star-branched molecules,”10.1021/ma00134a006__Macromolecules, vol. 17, no. 4, pp. 541–548, 2005, doi:10.1021/ma00134a006 .

T. Kramer, T. Röder, K. Huber, and H.-S. Kitzerow, “Surface modification of epoxy-functionalized acrylate colloids,”10.1002/pat.546__Polymers for Advanced Technologies, vol. 16, no. 1, pp. 38–41, 2004, doi:10.1002/pat.546 .

R. Schweins and K. Huber, “Particle scattering factor of pearl necklace chains,”10.1002/masy.200450702__Macromolecular Symposia, vol. 211, no. 1, pp. 25–42, 2004, doi:10.1002/masy.200450702 .

T. Kramer, T. Röder, K. Huber, and H.-S. Kitzerow, “Surface modification of epoxy-functionalized acrylate colloids,”10.1002/pat.546__Polymers for Advanced Technologies, vol. 16, no. 1, pp. 38–41, 2004, doi:10.1002/pat.546 .

R. Schweins, P. Lindner, and K. Huber, “Calcium Induced Shrinking of NaPA Chains:  A SANS Investigation of Single Chain Behavior,”10.1021/ma0347722__Macromolecules, vol. 36, no. 25, pp. 9564–9573, 2003, doi:10.1021/ma0347722 .

R. Schweins, J. Hollmann, and K. Huber, “Dilute solution behaviour of sodium polyacrylate chains in aqueous NaCl solutions,”10.1016/j.polymer.2003.07.005__Polymer, vol. 44, no. 23, pp. 7131–7141, 2003, doi:10.1016/j.polymer.2003.07.005 .

T. Röder, T. Kramer, K. Huber, and H.-S. Kitzerow, “Preparation of Positively and Negatively Charged Organic Colloids from a Single Precursor,”10.1002/macp.200300017__Macromolecular Chemistry and Physics, vol. 204, no. 18, pp. 2204–2211, 2003, doi:10.1002/macp.200300017 .

K. Huber, W. H. Stockmayer, and K. Soda, “Quasi-elastic scattering by semiflexible rings,”10.1016/0032-3861(90)90001-f__Polymer, vol. 31, no. 10, pp. 1811–1815, 2003, doi:10.1016/0032-3861(90)90001-f .

K. Huber, W. Burchard, S. Bantle, and L. J. Fetters, “Monte Carlo calculations in comparison to neutron scattering studies: 3. On the structure of 12-arm star molecules,”10.1016/0032-3861(87)90032-2__Polymer, vol. 28, no. 12, pp. 1997–2003, 2003, doi:10.1016/0032-3861(87)90032-2 .

K. Huber, W. Burchard, S. Bantle, and L. J.^Fetters, “Monte Carlo calculations in comparison to neutron scattering studies: 2. Global dimensions of 12-arm stars,”10.1016/0032-3861(87)90031-0__Polymer, vol. 28, no. 12, pp. 1990–1996, 2003, doi:10.1016/0032-3861(87)90031-0 .

K. Huber, W. Burchard, and S. Bantle, “Monte Carlo calculations in comparison to neutron scattering studies: 1. Linear chains,”10.1016/0032-3861(87)90155-8__Polymer, vol. 28, no. 6, pp. 863–872, 2003, doi:10.1016/0032-3861(87)90155-8 .

K. Huber and W. H. Stockmayer, “First cumulant of the dynamic structure factor for rigid rings,”10.1016/0032-3861(87)90030-9__Polymer, vol. 28, no. 12, pp. 1987–1989, 2003, doi:10.1016/0032-3861(87)90030-9 .

Y. Ikeda, M. Beer, M. Schmidt, and K. Huber, “Ca<sup>2+</sup> and Cu<sup>2+</sup> Induced Conformational Changes of Sodium Polymethacrylate in Dilute Aqueous Solution,”10.1021/ma970540p__Macromolecules, vol. 31, no. 3, pp. 728–733, 2002, doi:10.1021/ma970540p .

I. Quijada-Garrido, H. Siebert, C. Friedrich, and C. Schmidt, “Flow Behavior of Two Side-Chain Liquid Crystal Polymers Studied by Transient Rheology,”10.1021/ma991490m__Macromolecules, vol. 33, no. 10, pp. 3844–3854, 2000, doi:10.1021/ma991490m .

M. Lukaschek, S. Müller, A. Hasennindl, C. Schmidt, and D. A. Grabowski, “Lamellar lyomesophases under shear as studied by deuterium nuclear magnetic resonance,”10.1007/bf00658902__Colloid &;amp; Polymer Science, vol. 274, no. 1, pp. 1–7, 1996, doi:10.1007/bf00658902 .

C. Müller, C. Schmidt, and H. Frey, “Solid State NMR Investigation of -Deuterated Poly(di-n-hexylsilylene),”10.1021/ma951449t__Macromolecules, vol. 29, no. 9, pp. 3320–3322, 1996, doi:10.1021/ma951449t .

P. Fischer, C. Schmidt, and H. Finkelmann, “Amphiphilic liquid-crystalline networks — phase behavior and alignment by mechanical fields,”10.1002/marc.1995.030160605__Macromolecular Rapid Communications, vol. 16, no. 6, pp. 435–447, 1995, doi:10.1002/marc.1995.030160605 .

D. A. Grabowski and C. Schmidt, “Simultaneous Measurement of Shear Viscosity and Director Orientation of a Side-Chain Liquid-Crystalline Polymer by Rheo-NMR,”10.1021/ma00087a037__Macromolecules, vol. 27, no. 9, pp. 2632–2634, 1994, doi:10.1021/ma00087a037 .

S. Disch, C. Schmidt, and H. Finkelmann, “Nematic elastomers beyond the critical point,”10.1002/marc.1994.030150402__Macromolecular Rapid Communications, vol. 15, no. 4, pp. 303–310, 1994, doi:10.1002/marc.1994.030150402 .

U. Behrens and H.-S. Kitzerow, “Utility of a liquid crystalline diacrylate for bistable switching cholesteric gel displays,”10.1002/pat.1994.220050806__Polymers for Advanced Technologies, vol. 5, no. 8, pp. 433–437, 1994, doi:10.1002/pat.1994.220050806 .