Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.”https://doi.org/10.4028/p-5d009y__Key Engineering Materials 926 (2022): 1516–26.https://doi.org/10.4028/p-5d009y .
LibreCat: /record/32413
DOI: 10.4028/p-5d009y

Böhnke, Max, Eduard Unruh, Stanislaw Sell, Mathias Bobbert, David Hein, and Gerson Meschut. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.”https://doi.org/10.4028/p-wpuzyw__Key Engineering Materials 926 (2022): 1564–72.https://doi.org/10.4028/p-wpuzyw .
LibreCat: /record/33002
DOI: 10.4028/p-wpuzyw

Schmelzle, Lars, Marius Striewe, Julia Mergheim, Gerson Meschut, Gunnar Possart, Dominik Teutenberg, David Hein, and Paul Steinmann. “Testing, Modelling, and Parameter Identification for Adhesively Bonded Joints under the Influence of Temperature.”https://doi.org/10.1080/01694243.2022.2125714__Journal of Adhesion Science and Technology, 2022.https://doi.org/10.1080/01694243.2022.2125714 .
LibreCat: /record/34459
DOI: 10.1080/01694243.2022.2125714

Hofeditz, Lennart, Sünje Clausen, Alexander Rieß, Milad Mirbabaie, and Stefan Stieglitz. “Applying XAI to an AI-Based System for Candidate Management to Mitigate Bias and Discrimination in Hiring.”https://doi.org/10.1007/s12525-022-00600-9__Electronic Markets (ELMA), 2022.https://doi.org/10.1007/s12525-022-00600-9 .
LibreCat: /record/37138
DOI: 10.1007/s12525-022-00600-9

Henkes, Alexander, Henning Wessels, and Rolf Mahnken. “Physics Informed Neural Networks for Continuum Micromechanics.”https://doi.org/10.1016/j.cma.2022.114790__Computer Methods in Applied Mechanics and Engineering 393 (2022).https://doi.org/10.1016/j.cma.2022.114790 .
LibreCat: /record/30657
DOI: 10.1016/j.cma.2022.114790

Odziomek, Mateusz, Paolo Giusto, Janina Kossmann, Nadezda V. Tarakina, Julian Heske, Salvador M. Rivadeneira, Waldemar Keil, et al. “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor.”https://doi.org/10.1002/adma.202206405__Advanced Materials 34, no. 40 (2022).https://doi.org/10.1002/adma.202206405 .
LibreCat: /record/40558
DOI: 10.1002/adma.202206405

Jerigová, Mária, Julian Heske, ThomasD. Kühne, Zhihong Tian, Michael Tovar, Mateusz Odziomek, and Nieves Lopez Salas. “C            <sub>1</sub>            N            <sub>1</sub>            Thin Films from Guanine Decomposition Fragments.”https://doi.org/10.1002/admi.202202061__Advanced Materials Interfaces, 2022.https://doi.org/10.1002/admi.202202061 .
LibreCat: /record/40567
DOI: 10.1002/admi.202202061

Odziomek, Mateusz, Paolo Giusto, Janina Kossmann, Nadezda V. Tarakina, Julian Joachim Heske, Salvador M. Rivadeneira, Waldemar Keil, et al. “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor.”https://doi.org/10.1002/adma.202206405__Advanced Materials 34, no. 40 (2022).https://doi.org/10.1002/adma.202206405 .
LibreCat: /record/33687
DOI: 10.1002/adma.202206405

Kothe, Linda, Maximilian Albert, Cedrik Meier, Thorsten Wagner, and Michael Tiemann. “Stimulation and Enhancement of NearBandEdge Emission in Zinc Oxide by Distributed Bragg Reflectors.”https://doi.org/10.1002/admi.202102357__Advanced Materials Interfaces, 2022.https://doi.org/10.1002/admi.202102357 .
LibreCat: /record/29790
DOI: 10.1002/admi.202102357

Weinberger, Christian, Frederik Zysk, Marc Hartmann, Naveen Kaliannan, Waldemar Keil, Thomas Kühne, and Michael Tiemann. “The Structure of Water in Silica Mesopores – Influence of the Pore Wall Polarity.”https://doi.org/10.1002/admi.202200245__Advanced Materials Interfaces 9, no. 20 (2022).https://doi.org/10.1002/admi.202200245 .
LibreCat: /record/33685
DOI: 10.1002/admi.202200245

Meschut, Gerson, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.”https://doi.org/10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100113 .
LibreCat: /record/34216
DOI: 10.1016/j.jajp.2022.100113

Meschut, G., M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.”https://doi.org/10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100113 .
LibreCat: /record/32275
DOI: 10.1016/j.jajp.2022.100113

Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”https://doi.org/10.4028/p-1n6741__Key Engineering Materials 926 (2022): 1468–78.https://doi.org/10.4028/p-1n6741 .
LibreCat: /record/37647
DOI: 10.4028/p-1n6741

Joy, Tintu David, Deborah Weiß, Britta Schramm, and Gunter Kullmer. “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.”https://doi.org/10.3390/app12157557__Applied Sciences 12, no. 15 (2022).https://doi.org/10.3390/app12157557 .
LibreCat: /record/34224
DOI: 10.3390/app12157557

Schramm, Britta, Sven Harzheim, Deborah Weiß, Tintu David Joy, Martin Hofmann, Julia Mergheim, and Thomas Wallmersperger. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.”https://doi.org/10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, 2022.https://doi.org/10.1016/j.jajp.2022.100135 .
LibreCat: /record/34070
DOI: 10.1016/j.jajp.2022.100135

Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “Development of a Method for the Separate Measurement of the Growth of Internal Crack Tips by Means of the Potential Drop Method.”https://doi.org/10.1016/j.engfracmech.2022.108899__Engineering Fracture Mechanics, 2022.https://doi.org/10.1016/j.engfracmech.2022.108899 .
LibreCat: /record/34246
DOI: 10.1016/j.engfracmech.2022.108899

Ahmadov, A. I., Sh. M. Nagiyev, C. Aydin, V. A. Tarverdiyeva, M. Sh. Orujova, and S. V. Badalov. “Bound State Solutions of Dirac Equation: Spin and Pseudo-Spin Symmetry in the Presence of the Combined Manning–Rosen and Yukawa Tensor Potentials.”https://doi.org/10.1140/epjp/s13360-022-03255-9__The European Physical Journal Plus 137, no. 9 (2022).https://doi.org/10.1140/epjp/s13360-022-03255-9 .
LibreCat: /record/44041
DOI: 10.1140/epjp/s13360-022-03255-9

Ju, X., Rolf Mahnken, Y. Xu, and L. Liang. “NTFA-Enabled Goal-Oriented Adaptive Space–Time Finite Elements for Micro-Heterogeneous Elastoplasticity Problems.”https://doi.org/10.1016/j.cma.2022.115199__Computer Methods in Applied Mechanics and Engineering 398 (2022).https://doi.org/10.1016/j.cma.2022.115199 .
LibreCat: /record/32592
DOI: 10.1016/j.cma.2022.115199

Mahnken, Rolf. “New Low Order Runge–Kutta Schemes for Asymptotically Exact Global Error Estimation of Embedded Methods without Order Reduction.”https://doi.org/10.1016/j.cma.2022.115553__Computer Methods in Applied Mechanics and Engineering 401 (2022).https://doi.org/10.1016/j.cma.2022.115553 .
LibreCat: /record/33801
DOI: 10.1016/j.cma.2022.115553

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.”https://doi.org/10.4028/p-3rk19y__Key Engineering Materials 926 (2022): 683–89.https://doi.org/10.4028/p-3rk19y .
LibreCat: /record/32412
DOI: 10.4028/p-3rk19y

Schramm, Britta, and Deborah Weiß. “Fracture Mechanical Evaluation of the Material HX.”https://doi.org/10.1515/mt-2022-0191__Materials Testing 64, no. 10 (2022): 1437–49.https://doi.org/10.1515/mt-2022-0191 .
LibreCat: /record/34403
DOI: 10.1515/mt-2022-0191

Voswinkel, Dietrich, Jan Andre Striewe, Olexandr Grydin, Dennis Meinderink, Guido Grundmeier, Mirko Schaper, and Thomas Tröster. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.”https://doi.org/10.1080/09243046.2022.2143746__Advanced Composite Materials, 2022, 1–16.https://doi.org/10.1080/09243046.2022.2143746 .
LibreCat: /record/34097
DOI: 10.1080/09243046.2022.2143746

Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-Mechanical Processing of a Press Hardening Steel.”https://doi.org/10.1007/s11661-022-06732-z__Metallurgical and Materials Transactions A 53, no. 8 (2022): 3125–42.https://doi.org/10.1007/s11661-022-06732-z .
LibreCat: /record/36327
DOI: 10.1007/s11661-022-06732-z

Slapáková, Michaela, Barbora Kivská, Klaudia Fekete, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “The Influence of Surface on Direction of Diffusion in Al-Fe Clad Material.”https://doi.org/10.1016/j.matchar.2022.112005__Materials Characterization 190 (2022).https://doi.org/10.1016/j.matchar.2022.112005 .
LibreCat: /record/36328
DOI: 10.1016/j.matchar.2022.112005

Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Influence of Thermomechanical Processing on the Microstructural and Mechanical Properties of Steel 22Mn.”https://doi.org/10.1016/j.msea.2022.142780__Materials Science and Engineering: A 838 (2022).https://doi.org/10.1016/j.msea.2022.142780 .
LibreCat: /record/29811
DOI: 10.1016/j.msea.2022.142780

Tillmann, Wolfgang, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Maxwell Hein, Kay-Peter Hoyer, Mirko Schaper, Daria Gödecke, Hilke Oltmanns, and Jessica Meißner. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.”https://doi.org/10.1016/j.matlet.2022.132384__Materials Letters, 2022.https://doi.org/10.1016/j.matlet.2022.132384 .
LibreCat: /record/31076
DOI: 10.1016/j.matlet.2022.132384

Hein, Maxwell, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.”https://doi.org/10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue 166 (2022).https://doi.org/10.1016/j.ijfatigue.2022.107235 .
LibreCat: /record/41496
DOI: 10.1016/j.ijfatigue.2022.107235

Pramanik, Sudipta, Dennis Milaege, Kay-Peter Hoyer, and Mirko Schaper. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.”https://doi.org/10.1016/j.msea.2022.143887__Materials Science and Engineering: A 854 (2022).https://doi.org/10.1016/j.msea.2022.143887 .
LibreCat: /record/41495
DOI: 10.1016/j.msea.2022.143887

Tillmann, Wolfgang, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Maxwell Hein, Kay-Peter Hoyer, Mirko Schaper, Daria Gödecke, Hilke Oltmanns, and Jessica Meißner. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.”https://doi.org/10.1016/j.matlet.2022.132384__Materials Letters 321 (2022).https://doi.org/10.1016/j.matlet.2022.132384 .
LibreCat: /record/41501
DOI: 10.1016/j.matlet.2022.132384

Pramanik, Sudipta, Dennis Milaege, Kay-Peter Hoyer, and Mirko Schaper. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.”https://doi.org/10.1016/j.msea.2022.143887__Materials Science and Engineering: A 854 (2022).https://doi.org/10.1016/j.msea.2022.143887 .
LibreCat: /record/41491
DOI: 10.1016/j.msea.2022.143887

Hein, Maxwell, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.”https://doi.org/10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue 166 (2022).https://doi.org/10.1016/j.ijfatigue.2022.107235 .
LibreCat: /record/41490
DOI: 10.1016/j.ijfatigue.2022.107235

Schramm, Britta, Sven Martin, Christian Steinfelder, Christian Roman Bielak, Alexander Brosius, Gerson Meschut, Thomas Tröster, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.”https://doi.org/10.1016/j.jajp.2022.100133__Journal of Advanced Joining Processes 6 (2022).https://doi.org/10.1016/j.jajp.2022.100133 .
LibreCat: /record/34069
DOI: 10.1016/j.jajp.2022.100133

Schramm, Britta, Johannes Friedlein, Benjamin Gröger, Christian Roman Bielak, Mathias Bobbert, Maik Gude, Gerson Meschut, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.”https://doi.org/10.1016/j.jajp.2022.100134__Journal of Advanced Joining Processes, 2022.https://doi.org/10.1016/j.jajp.2022.100134 .
LibreCat: /record/34068
DOI: 10.1016/j.jajp.2022.100134

Rozo Vasquez, Julian, Hanigah Kanagarajah, Bahman Arian, Lukas Kersting, Werner Homberg, Ansgar Trächtler, and Frank Walther. “Coupled Microscopic and Micromagnetic Depth-Specific Analysis of Plastic Deformation and Phase Transformation of Metastable Austenitic Steel AISI 304L by Flow Forming.”https://doi.org/10.1515/pm-2022-0064__Practical Metallography 59, no. 11 (2022): 660–75.https://doi.org/10.1515/pm-2022-0064 .
LibreCat: /record/34000
DOI: 10.1515/pm-2022-0064

Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes.”https://doi.org/10.4028/p-yp2hj3__Key Engineering Materials 926 (2022): 862–74.https://doi.org/10.4028/p-yp2hj3 .
LibreCat: /record/33999
DOI: 10.4028/p-yp2hj3

Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.”https://doi.org/10.4028/p-5fxp53__Key Engineering Materials 926 (2022): 1457–67.https://doi.org/10.4028/p-5fxp53 .
LibreCat: /record/32869
DOI: 10.4028/p-5fxp53

Gräßler, Iris, Christian Oleff, and Daniel Preuß. “Proactive Management of Requirement Changes in the Development of Complex Technical Systems.”https://doi.org/10.3390/app12041874__Applied Sciences 12, no. 4 (2022).https://doi.org/10.3390/app12041874 .
LibreCat: /record/30213
DOI: 10.3390/app12041874

Ahmed, Hammad, Yuttana Intaravanne, Yang Ming, Muhammad Afnan Ansari, Gerald S. Buller, Thomas Zentgraf, and Xianzhong Chen. “Multichannel Superposition of Grafted Perfect Vortex Beams.”https://doi.org/10.1002/adma.202203044__Advanced Materials 34, no. 30 (2022).https://doi.org/10.1002/adma.202203044 .
LibreCat: /record/32068
DOI: 10.1002/adma.202203044

Cresson, Jacky, and Khaled Hariz-Belgacem. “About the Structure of the Discrete and Continuous Eringen’s Nonlocal Elastica.”https://doi.org/10.1177/10812865221108094__Mathematics and Mechanics of Solids, 2022.https://doi.org/10.1177/10812865221108094 .
LibreCat: /record/39412
DOI: 10.1177/10812865221108094

Cresson, Jacky, and Khaled Hariz Belgacem. “About the Structure of the Discrete and Continuous Eringen’s Nonlocal Elastica.”https://doi.org/10.1177/10812865221108094__Mathematics and Mechanics of Solids, 2022.https://doi.org/10.1177/10812865221108094 .
LibreCat: /record/39400
DOI: 10.1177/10812865221108094

Alavi, Sascha, Eva Böhm, Johannes Habel, Jan Wieseke, Christian Schmitz, and Felix Brüggemann. “The Ambivalent Role of Monetary Sales Incentives in Service Innovation Selling.”https://doi.org/10.1111/jpim.12600__Journal of Product Innovation Management 39, no. 3 (2022): 445–63.https://doi.org/10.1111/jpim.12600 .
LibreCat: /record/46634
DOI: 10.1111/jpim.12600

Marschalt, Christoph, Dominik Schroder, Sven Lange, Ulrich Hilleringmann, Christian Hedayat, Harald Kuhn, Denis Sievers, and Jens Förstner. “Far-Field Calculation from Magnetic Huygens Box Data Using the Boundary Element Method.”https://doi.org/10.1109/ssi56489.2022.9901431__In 2022 Smart Systems Integration (SSI). Grenoble, France: IEEE, 2022.https://doi.org/10.1109/ssi56489.2022.9901431 .
LibreCat: /record/33509
DOI: 10.1109/ssi56489.2022.9901431

Strohmeier, Stefan, Julian Collet, and Rüdiger Kabst. “(How) Do Advanced Data and Analyses Enable HR Analytics Success? A Neo-Configurational Analysis.”https://doi.org/10.1108/bjm-05-2021-0188__Baltic Journal of Management 17, no. 3 (2022): 285–303.https://doi.org/10.1108/bjm-05-2021-0188 .
LibreCat: /record/50463
DOI: 10.1108/bjm-05-2021-0188

Hälterlein, Jens. “Technological Expectations and the Making of Europe.”https://doi.org/10.23987/sts.110036__Science &; Technology Studies 36, no. 2 (2022): 26–46.https://doi.org/10.23987/sts.110036 .
LibreCat: /record/50604
DOI: 10.23987/sts.110036

Wells, Aaron. “Science and the Principle of Sufficient Reason: Du Châtelet Contra Wolff.”https://doi.org/10.1086/723961__HOPOS: The Journal of the International Society for the History of Philosophy of Science 13, no. 1 (2022): 24–53.https://doi.org/10.1086/723961 .
LibreCat: /record/51007
DOI: 10.1086/723961

Duderija, B., A. González-Orive, H.C. Schmidt, J.C. Calderón, I. Hordych, H.J. Maier, W. Homberg, and G. Grundmeier. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.”https://doi.org/10.1016/j.jajp.2022.100137__Journal of Advanced Joining Processes 7 (2022).https://doi.org/10.1016/j.jajp.2022.100137 .
LibreCat: /record/43021
DOI: 10.1016/j.jajp.2022.100137

Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander Brosius, and Maik Gude. “Investigations on Combined &;lt;I&;gt;In Situ&;lt;/I&;gt; CT and Acoustic Analysis during Clinching.”https://doi.org/10.4028/p-32330d__Key Engineering Materials 926 (2022): 1489–97.https://doi.org/10.4028/p-32330d .
LibreCat: /record/51197
DOI: 10.4028/p-32330d

Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”https://doi.org/10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100108 .
LibreCat: /record/31828
DOI: 10.1016/j.jajp.2022.100108

Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”https://doi.org/10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, 2022.https://doi.org/10.1016/j.jajp.2022.100108 .
LibreCat: /record/31238
DOI: 10.1016/j.jajp.2022.100108

Böhne, Christoph, Gerson Meschut, MAX BIEGLER, and MICHAEL RETHMEIER. “The Influence of Electrode Indentation Rate on LME Formation during RSW.”https://doi.org/10.29391/2022.101.015__Welding Journal 101, no. 7 (2022): 197–207.https://doi.org/10.29391/2022.101.015 .
LibreCat: /record/52613
DOI: 10.29391/2022.101.015

Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”https://doi.org/10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes 5 (2022).https://doi.org/10.1016/j.jajp.2022.100108 .
LibreCat: /record/34215
DOI: 10.1016/j.jajp.2022.100108

Grimm, Sebastian, Seung-Jin Baik, Patrick Hemberger, Tina Kasper, Andreas M. Kempf, and Burak Atakan. “Insights into the Decomposition of Zirconium Acetylacetonate Using Synchrotron Radiation: Routes to the Formation of Volatile Zr-Intermediates.”https://doi.org/10.1557/s43578-022-00566-6__Journal of Materials Research 37, no. 9 (2022): 1558–75.https://doi.org/10.1557/s43578-022-00566-6 .
LibreCat: /record/53084
DOI: 10.1557/s43578-022-00566-6

Grimm, Sebastian, Patrick Hemberger, Tina Kasper, and Burak Atakan. “Mechanism and Kinetics of the Thermal Decomposition of Fe(C<sub>5</sub>H<sub>5</sub>)<sub>2</sub> in Inert and Reductive Atmosphere: A SynchrotronAssisted Investigation in A Microreactor.”https://doi.org/10.1002/admi.202200192__Advanced Materials Interfaces 9, no. 22 (2022).https://doi.org/10.1002/admi.202200192 .
LibreCat: /record/53083
DOI: 10.1002/admi.202200192

Lange, Sven, Christian Hedayat, Harald Kuhn, and Ulrich Hilleringmann. “Adaptation and Optimization of Planar Coils for a More Accurate and Far-Reaching Magnetic Field-Based Localization in the Near Field.”https://doi.org/10.1109/ssi52265.2021.9466958__In 2021 Smart Systems Integration (SSI). Grenoble, France: IEEE, 2021.https://doi.org/10.1109/ssi52265.2021.9466958 .
LibreCat: /record/22532
DOI: 10.1109/ssi52265.2021.9466958

Agostini, Franca d’, and Elena Ficara. “Hegel’s Interpretation of the Liar Paradox.”https://doi.org/10.1080/01445340.2021.1927455__History and Philosophy of Logic, 2021, 1–24.https://doi.org/10.1080/01445340.2021.1927455 .
LibreCat: /record/30099
DOI: 10.1080/01445340.2021.1927455

Hagengruber, Ruth, and Sarah Hutton, eds. Women Philosophers from the Renaissance to the Enlightenment. 1st ed. London: Routledge, 2021.
LibreCat: /record/21276

Mirhosseini, Hossein, Hossein Tahmasbi, Sai Ram Kuchana, Alireza Ghasemi, and Thomas Kühne. “An Automated Approach for Developing Neural Network Interatomic Potentials with FLAME.”https://doi.org/10.1016/j.commatsci.2021.110567__Computational Materials Science 197 (2021).https://doi.org/10.1016/j.commatsci.2021.110567 .
LibreCat: /record/33657
DOI: 10.1016/j.commatsci.2021.110567

Wortmann, Martin, Klaus Viertel, Alexander Welle, Waldemar Keil, Natalie Frese, Wiebke Hachmann, Philipp Krieger, et al. “Anomalous Bulk Diffusion of Methylene Diphenyl Diisocyanate in Silicone Elastomer.”https://doi.org/10.1016/j.ijheatmasstransfer.2021.121536__International Journal of Heat and Mass Transfer 177 (2021).https://doi.org/10.1016/j.ijheatmasstransfer.2021.121536 .
LibreCat: /record/35327
DOI: 10.1016/j.ijheatmasstransfer.2021.121536

Hagengruber, Ruth. “Du Châtelet, Émilie (1706–1749).”https://doi.org/10.1007/978-3-319-20791-9_410-1__In Encyclopedia of Early Modern Philosophy and the Sciences. Cham: Springer International Publishing, 2021.https://doi.org/10.1007/978-3-319-20791-9_410-1 .
LibreCat: /record/34707
DOI: 10.1007/978-3-319-20791-9_410-1

Mirbabaie, Milad, Felix Brünker, Nicholas R. J. Möllmann Frick, and Stefan Stieglitz. “The Rise of Artificial Intelligence – Understanding the AI Identity Threat at the Workplace.”https://doi.org/10.1007/s12525-021-00496-x__Electronic Markets 32, no. 1 (2021): 73–99.https://doi.org/10.1007/s12525-021-00496-x .
LibreCat: /record/37144
DOI: 10.1007/s12525-021-00496-x

Dahmen, Stephan. Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press, 2021.https://doi.org/10.14361/9783839457061 .
LibreCat: /record/37274
DOI: 10.14361/9783839457061

Dahmen, Stephan. Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press, 2021.https://doi.org/10.14361/9783839457061 .
LibreCat: /record/37273
DOI: 10.14361/9783839457061

Ichev, Riste, Jernej Koren, Urska Kosi, Katarina Sitar Sustar, and Aljosa Valentincic. Cost of Debt for Private Firms Revisited: Voluntary Audits as a Reflection of Risk, 2021.
LibreCat: /record/37136

Cheng, C., Z. Wang, Z. Jin, X. Ju, Swetlana Schweizer, Thomas Tröster, and Rolf Mahnken. “Non-Linear Mean-Field Modelling of UD Composite Laminates Accounting for Average Asymmetric Plasticity of the Matrix, Debonding and Progressive Failure.”https://doi.org/10.1016/j.compositesb.2021.109209__Composites Part B: Engineering 224 (2021).https://doi.org/10.1016/j.compositesb.2021.109209 .
LibreCat: /record/23431
DOI: 10.1016/j.compositesb.2021.109209

Rossel, Moritz Sebastian, Max Böhnke, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.”https://doi.org/10.4028/www.scientific.net/kem.883.81__Key Engineering Materials 883 (2021): 81–88.https://doi.org/10.4028/www.scientific.net/kem.883.81 .
LibreCat: /record/34227
DOI: 10.4028/www.scientific.net/kem.883.81

Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HX.”https://doi.org/10.4028/www.scientific.net/kem.883.127__In Key Engineering Materials, 883:127–32. Trans Tech Publications, Ltd., 2021.https://doi.org/10.4028/www.scientific.net/kem.883.127 .
LibreCat: /record/30675
DOI: 10.4028/www.scientific.net/kem.883.127

Klement, Philip, Natalie Dehnhardt, Chuan-Ding Dong, Florian Dobener, Samuel Bayliff, Julius Winkler, Detlev M. Hofmann, et al. “Atomically Thin Sheets of LeadFree 1D Hybrid Perovskites Feature Tunable WhiteLight Emission from SelfTrapped Excitons.”https://doi.org/10.1002/adma.202100518__Advanced Materials 33, no. 23 (2021).https://doi.org/10.1002/adma.202100518 .
LibreCat: /record/40434
DOI: 10.1002/adma.202100518

Kappe, Fabian, Mathias Bobbert, and Gerson Meschut. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.”https://doi.org/10.4028/www.scientific.net/kem.883.3__Key Engineering Materials 883 (2021): 3–10.https://doi.org/10.4028/www.scientific.net/kem.883.3 .
LibreCat: /record/34226
DOI: 10.4028/www.scientific.net/kem.883.3

Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.”https://doi.org/10.1016/j.msea.2021.142312__Materials Science and Engineering: A 831 (2021).https://doi.org/10.1016/j.msea.2021.142312 .
LibreCat: /record/41508
DOI: 10.1016/j.msea.2021.142312

Hein, Maxwell, Kay-Peter Hoyer, and Mirko Schaper. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.”https://doi.org/10.1002/mawe.202000288__Materialwissenschaft Und Werkstofftechnik 52, no. 7 (2021): 703–16.https://doi.org/10.1002/mawe.202000288 .
LibreCat: /record/41511
DOI: 10.1002/mawe.202000288

Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.”https://doi.org/10.1016/j.msea.2021.141662__Materials Science and Engineering: A 822 (2021).https://doi.org/10.1016/j.msea.2021.141662 .
LibreCat: /record/41512
DOI: 10.1016/j.msea.2021.141662

Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, and Mirko Schaper. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.”https://doi.org/10.1016/j.ijfatigue.2021.106498__International Journal of Fatigue 153 (2021).https://doi.org/10.1016/j.ijfatigue.2021.106498 .
LibreCat: /record/41510
DOI: 10.1016/j.ijfatigue.2021.106498

Krüger, Jan Tobias, Kay-Peter Hoyer, and Mirko Schaper. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.”https://doi.org/10.1016/j.matlet.2021.130890__Materials Letters 306 (2021).https://doi.org/10.1016/j.matlet.2021.130890 .
LibreCat: /record/41509
DOI: 10.1016/j.matlet.2021.130890

Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.”https://doi.org/10.1007/s11665-021-06065-9__Journal of Materials Engineering and Performance 30, no. 11 (2021): 8048–56.https://doi.org/10.1007/s11665-021-06065-9 .
LibreCat: /record/41517
DOI: 10.1007/s11665-021-06065-9

Krüger, Jan Tobias, Kay-Peter Hoyer, Viviane Filor, Sudipta Pramanik, Manfred Kietzmann, Jessica Meißner, and Mirko Schaper. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.”https://doi.org/10.1016/j.jallcom.2021.159544__Journal of Alloys and Compounds 871 (2021).https://doi.org/10.1016/j.jallcom.2021.159544 .
LibreCat: /record/41514
DOI: 10.1016/j.jallcom.2021.159544

Hubner-Benz, Sylvia, Biljana Rudic, and Matthias Baum. “How Entrepreneur’s Leadership Behavior and Demographics Shape Applicant Attraction to New Ventures: The Role of Stereotypes.”https://doi.org/10.1080/09585192.2021.1893785__The International Journal of Human Resource Management 34, no. 11 (2021): 2137–72.https://doi.org/10.1080/09585192.2021.1893785 .
LibreCat: /record/48520
DOI: 10.1080/09585192.2021.1893785

Hippert, Benjamin, and André Uhde. CDS Investors’ Risk Perceptions of M&;A Announcements, n.d.
LibreCat: /record/36060

Hippert, Benjamin, André Uhde, and Sascha Tobias Wengerek. Determinants of CDS Trading on Major Banks, n.d.
LibreCat: /record/36063

Wells, Aaron. “Du Châtelet on the Need for Mathematics in Physics.”https://doi.org/10.1086/714874__Philosophy of Science 88, no. 5 (2021): 1137–48.https://doi.org/10.1086/714874 .
LibreCat: /record/51003
DOI: 10.1086/714874

Köhler, Daniel, Behdad Sadeghian, Robert Kupfer, Juliane Troschitz, Maik Gude, and Alexander Brosius. “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”https://doi.org/10.4028/www.scientific.net/kem.883.89__Key Engineering Materials 883 (2021): 89–96.https://doi.org/10.4028/www.scientific.net/kem.883.89 .
LibreCat: /record/51202
DOI: 10.4028/www.scientific.net/kem.883.89

Köhler, D., B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”https://doi.org/10.1016/j.jajp.2021.100089__Journal of Advanced Joining Processes 5 (2021).https://doi.org/10.1016/j.jajp.2021.100089 .
LibreCat: /record/51198
DOI: 10.1016/j.jajp.2021.100089

Winkler, Christoph, Alexander Fust, and Tobias Jenert. “From Entrepreneurial Experience to Expertise: A Self-Regulated Learning Perspective.”https://doi.org/10.1080/00472778.2021.1883041__Journal of Small Business Management 61, no. 4 (2021): 2071–96.https://doi.org/10.1080/00472778.2021.1883041 .
LibreCat: /record/52705
DOI: 10.1080/00472778.2021.1883041

Bernemann, Sören Antonius. Erstellung eines CFD-Modells für die Entwicklung eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen. Paderborn, 2020.
LibreCat: /record/23796

Szubartowicz, Eva, and Guido Schryen. “Timing in Information Security: An Event Study on the Impact of Information Security Investment Announcements.” Journal of Information System Security 16, no. 1 (2020): 3–31.
LibreCat: /record/16249

Pineda, Pedro, and Isabel Steinhardt. “The Debate on Student Evaluations of Teaching: Global Convergence Confronts Higher Education Traditions.”https://doi.org/10.1080/13562517.2020.1863351__Teaching in Higher Education, 2020, 1–21.https://doi.org/10.1080/13562517.2020.1863351 .
LibreCat: /record/27117
DOI: 10.1080/13562517.2020.1863351

Opel, Simone Anna, and Michael Schlichtig. “Data Science und Big Data in der beruflichen Bildung – Konzeption und Erprobung eines Projektkurses für die Sekundarstufe II.”https://doi.org/10.3278/6004722w__In Sammelband der 27. Fachtagung der BAG Berufliche Bildung, edited by Thomas Vollmer, Torben Karges, Tim Richter, Britta Schlömer, and Sören Schütt-Sayed, 55:176–94. Berufsbildung, Arbeit und Innovation. Bielefeld: wbv Media GmbH &; Co. KG, 2020.https://doi.org/10.3278/6004722w .
LibreCat: /record/29298
DOI: https://doi.org/10.3278/6004722w

Hoellger, Christian, Sabrina Sommer, Isabelle Albert, and Heike M. Buhl. “Intergenerational Value Similarity in Adulthood.”https://doi.org/10.1177/0192513x20943914__Journal of Family Issues 42, no. 6 (2020): 1234–57.https://doi.org/10.1177/0192513x20943914 .
LibreCat: /record/32559
DOI: 10.1177/0192513x20943914

Hanusch, Maximilian. “The Regularity Problem for Lie Groups with Asymptotic Estimate Lie Algebras.”https://doi.org/10.1016/j.indag.2019.12.001__Indagationes Mathematicae 31, no. 1 (2020): 152–76.https://doi.org/10.1016/j.indag.2019.12.001 .
LibreCat: /record/34828
DOI: 10.1016/j.indag.2019.12.001

Kottmann, Brigitte, and Catania Pieper. “Project ‘Schule Für Alle’ as a Mentoring Programme in University Teacher Education: Professionalization Processes of Student Teachers in Different Practical University Phases.”https://doi.org/10.1556/063.2020.00022__Hungarian Educational Research Journal 10, no. 3 (2020): 232–51.https://doi.org/10.1556/063.2020.00022 .
LibreCat: /record/39817
DOI: 10.1556/063.2020.00022

Nowroozi, Mohammad Ali, Kerstin Wissel, Manuel Donzelli, Niloofar Hosseinpourkahvaz, Sergi Plana-Ruiz, Ute Kolb, Roland Schoch, et al. “High Cycle Life All-Solid-State Fluoride Ion Battery with La&;jats:Sub&;2&;/Jats:Sub&;NiO&;jats:Sub&;4+d&;/Jats:Sub&; High Voltage Cathode.”https://doi.org/10.1038/s43246-020-0030-5__Communications Materials 1, no. 1 (2020).https://doi.org/10.1038/s43246-020-0030-5 .
LibreCat: /record/41027
DOI: 10.1038/s43246-020-0030-5

Schmal, Christopher, and Gerson Meschut. “Refill Friction Stir Spot and Resistance Spot Welding of Aluminium Joints with Large Total Sheet Thicknesses (III-1965-19).”https://doi.org/10.1007/s40194-020-00922-2__Welding in the World 64, no. 9 (2020): 1471–80.https://doi.org/10.1007/s40194-020-00922-2 .
LibreCat: /record/43160
DOI: 10.1007/s40194-020-00922-2

Gollnick, Maik, Patrick Giese, David Hein, Gerson Meschut, and Daniel Herfert. “Early Stage Crack Detection in Mechanically Joined Steel/Aluminum Joints by Condition Monitoring.”https://doi.org/10.3139/120.111558__Materials Testing 62, no. 9 (2020): 877–82.https://doi.org/10.3139/120.111558 .
LibreCat: /record/43162
DOI: 10.3139/120.111558

Schmal, Christopher, and Gerson Meschut. “Process Characteristics and Influences of Production-Related Disturbances in Resistance Element Welding of Hybrid Materials with Steel Cover Sheets and Polymer Core.”https://doi.org/10.1007/s40194-019-00842-w__Welding in the World 64, no. 3 (2020): 437–48.https://doi.org/10.1007/s40194-019-00842-w .
LibreCat: /record/43161
DOI: 10.1007/s40194-019-00842-w

Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Substrate Pretreatment on the Low Cycle Fatigue Performance of Tungsten Carbidecobalt Coated Additive Manufactured 316L Substrates.”https://doi.org/10.1002/mawe.202000109__Materialwissenschaft Und Werkstofftechnik 51, no. 11 (2020): 1452–64.https://doi.org/10.1002/mawe.202000109 .
LibreCat: /record/41518
DOI: 10.1002/mawe.202000109

Wu, Haoran, T. Bill, Z.J. Teng, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, and Peter Starke. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.”https://doi.org/10.1016/j.msea.2020.139597__Materials Science and Engineering: A 794 (2020).https://doi.org/10.1016/j.msea.2020.139597 .
LibreCat: /record/41520
DOI: 10.1016/j.msea.2020.139597

Andreiev, Anatolii, Kay-Peter Hoyer, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Degradable Silverbased Alloys.”https://doi.org/10.1002/mawe.201900191__Materialwissenschaft Und Werkstofftechnik 51, no. 4 (2020): 517–30.https://doi.org/10.1002/mawe.201900191 .
LibreCat: /record/41522
DOI: 10.1002/mawe.201900191

Böhm, Eva, Andreas Eggert, Harri Terho, Wolfgang Ulaga, and Alexander Haas. “Drivers and Outcomes of Salespersons’ Value Opportunity Recognition Competence in Solution Selling.”https://doi.org/10.1080/08853134.2020.1778484__Journal of Personal Selling and Sales Management 40, no. 3 (2020): 180–97.https://doi.org/10.1080/08853134.2020.1778484 .
LibreCat: /record/46636
DOI: 10.1080/08853134.2020.1778484

Hubner-Benz, Sylvia. “When Entrepreneurs Become Leaders: How Entrepreneurs Deal with People Management.”https://doi.org/10.1504/ijev.2020.105571__International Journal of Entrepreneurial Venturing 12, no. 2 (2020).https://doi.org/10.1504/ijev.2020.105571 .
LibreCat: /record/48524
DOI: 10.1504/ijev.2020.105571

Rudic, Biljana, Sylvia Hubner-Benz, and Matthias Baum. “Hustlers, Hipsters and Hackers: Potential Employees’ Stereotypes of Entrepreneurial Leaders.”https://doi.org/10.1016/j.jbvi.2020.e00220__Journal of Business Venturing Insights 15 (2020).https://doi.org/10.1016/j.jbvi.2020.e00220 .
LibreCat: /record/48521
DOI: 10.1016/j.jbvi.2020.e00220

Mordhorst, Lisa, and Bernd Gössling. “Dual Study Programmes as a Design Challenge: Identifying Areas for Improvement as a Starting Point for Interventions.”https://doi.org/10.15460/eder.4.1.1482__EDeR. Educational Design Research 4, no. 1 (2020).https://doi.org/10.15460/eder.4.1.1482 .
LibreCat: /record/48366
DOI: 10.15460/eder.4.1.1482