Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.”10.4028/p-5d009y__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1516–26, doi:10.4028/p-5d009y.
LibreCat: /record/32413
DOI: 10.4028/p-5d009y

Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.”10.4028/p-wpuzyw__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:10.4028/p-wpuzyw.
LibreCat: /record/33002
DOI: 10.4028/p-wpuzyw

Schmelzle, Lars, et al. “Testing, Modelling, and Parameter Identification for Adhesively Bonded Joints under the Influence of Temperature.”10.1080/01694243.2022.2125714__Journal of Adhesion Science and Technology, 2022, doi:10.1080/01694243.2022.2125714.
LibreCat: /record/34459
DOI: 10.1080/01694243.2022.2125714

Hofeditz, Lennart, et al. “Applying XAI to an AI-Based System for Candidate Management to Mitigate Bias and Discrimination in Hiring.”10.1007/s12525-022-00600-9__Electronic Markets (ELMA), Springer Science and Business Media LLC, 2022, doi:10.1007/s12525-022-00600-9.
LibreCat: /record/37138
DOI: 10.1007/s12525-022-00600-9

Henkes, Alexander, et al. “Physics Informed Neural Networks for Continuum Micromechanics.”10.1016/j.cma.2022.114790__Computer Methods in Applied Mechanics and Engineering, vol. 393, 114790, Elsevier BV, 2022, doi:10.1016/j.cma.2022.114790.
LibreCat: /record/30657
DOI: 10.1016/j.cma.2022.114790

Odziomek, Mateusz, et al. “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor.”10.1002/adma.202206405__Advanced Materials, vol. 34, no. 40, 2206405, Wiley, 2022, doi:10.1002/adma.202206405.
LibreCat: /record/40558
DOI: 10.1002/adma.202206405

Jerigová, Mária, et al. “C            <sub>1</sub>            N            <sub>1</sub>            Thin Films from Guanine Decomposition Fragments.”10.1002/admi.202202061__Advanced Materials Interfaces, 2202061, Wiley, 2022, doi:10.1002/admi.202202061.
LibreCat: /record/40567
DOI: 10.1002/admi.202202061

Odziomek, Mateusz, et al. “‘Red Carbon’: A Rediscovered Covalent Crystalline Semiconductor.”10.1002/adma.202206405__Advanced Materials, vol. 34, no. 40, 2206405, Wiley, 2022, doi:10.1002/adma.202206405.
LibreCat: /record/33687
DOI: 10.1002/adma.202206405

Kothe, Linda, et al. “Stimulation and Enhancement of NearBandEdge Emission in Zinc Oxide by Distributed Bragg Reflectors.”10.1002/admi.202102357__Advanced Materials Interfaces, 2102357, Wiley, 2022, doi:10.1002/admi.202102357.
LibreCat: /record/29790
DOI: 10.1002/admi.202102357

Weinberger, Christian, et al. “The Structure of Water in Silica Mesopores – Influence of the Pore Wall Polarity.”10.1002/admi.202200245__Advanced Materials Interfaces, vol. 9, no. 20, 2200245, Wiley, 2022, doi:10.1002/admi.202200245.
LibreCat: /record/33685
DOI: 10.1002/admi.202200245

Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.
LibreCat: /record/34216
DOI: 10.1016/j.jajp.2022.100113

Meschut, G., et al. “Review on Mechanical Joining by Plastic Deformation.”10.1016/j.jajp.2022.100113__Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.
LibreCat: /record/32275
DOI: 10.1016/j.jajp.2022.100113

Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”10.4028/p-1n6741__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1468–78, doi:10.4028/p-1n6741.
LibreCat: /record/37647
DOI: 10.4028/p-1n6741

Joy, Tintu David, et al. “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.”10.3390/app12157557__Applied Sciences, vol. 12, no. 15, 7557, MDPI AG, 2022, doi:10.3390/app12157557.
LibreCat: /record/34224
DOI: 10.3390/app12157557

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.”10.1016/j.jajp.2022.100135__Journal of Advanced Joining Processes, 100135, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100135.
LibreCat: /record/34070
DOI: 10.1016/j.jajp.2022.100135

Kullmer, Gunter, et al. “Development of a Method for the Separate Measurement of the Growth of Internal Crack Tips by Means of the Potential Drop Method.”10.1016/j.engfracmech.2022.108899__Engineering Fracture Mechanics, 108899, Elsevier BV, 2022, doi:10.1016/j.engfracmech.2022.108899.
LibreCat: /record/34246
DOI: 10.1016/j.engfracmech.2022.108899

Ahmadov, A. I., et al. “Bound State Solutions of Dirac Equation: Spin and Pseudo-Spin Symmetry in the Presence of the Combined Manning–Rosen and Yukawa Tensor Potentials.”10.1140/epjp/s13360-022-03255-9__The European Physical Journal Plus, vol. 137, no. 9, 1075, Springer Science and Business Media LLC, 2022, doi:10.1140/epjp/s13360-022-03255-9.
LibreCat: /record/44041
DOI: 10.1140/epjp/s13360-022-03255-9

Ju, X., et al. “NTFA-Enabled Goal-Oriented Adaptive Space–Time Finite Elements for Micro-Heterogeneous Elastoplasticity Problems.”10.1016/j.cma.2022.115199__Computer Methods in Applied Mechanics and Engineering, vol. 398, 115199, Elsevier BV, 2022, doi:10.1016/j.cma.2022.115199.
LibreCat: /record/32592
DOI: 10.1016/j.cma.2022.115199

Mahnken, Rolf. “New Low Order Runge–Kutta Schemes for Asymptotically Exact Global Error Estimation of Embedded Methods without Order Reduction.”10.1016/j.cma.2022.115553__Computer Methods in Applied Mechanics and Engineering, vol. 401, 115553, Elsevier BV, 2022, doi:10.1016/j.cma.2022.115553.
LibreCat: /record/33801
DOI: 10.1016/j.cma.2022.115553

Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.”10.4028/p-3rk19y__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 683–89, doi:10.4028/p-3rk19y.
LibreCat: /record/32412
DOI: 10.4028/p-3rk19y

Schramm, Britta, and Deborah Weiß. “Fracture Mechanical Evaluation of the Material HX.”10.1515/mt-2022-0191__Materials Testing, vol. 64, no. 10, Walter de Gruyter GmbH, 2022, pp. 1437–49, doi:10.1515/mt-2022-0191.
LibreCat: /record/34403
DOI: 10.1515/mt-2022-0191

Voswinkel, Dietrich, et al. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.”10.1080/09243046.2022.2143746__Advanced Composite Materials, Informa UK Limited, 2022, pp. 1–16, doi:10.1080/09243046.2022.2143746.
LibreCat: /record/34097
DOI: 10.1080/09243046.2022.2143746

Reitz, Alexander, et al. “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-Mechanical Processing of a Press Hardening Steel.”10.1007/s11661-022-06732-z__Metallurgical and Materials Transactions A, vol. 53, no. 8, Springer Science and Business Media LLC, 2022, pp. 3125–42, doi:10.1007/s11661-022-06732-z.
LibreCat: /record/36327
DOI: 10.1007/s11661-022-06732-z

Slapáková, Michaela, et al. “The Influence of Surface on Direction of Diffusion in Al-Fe Clad Material.”10.1016/j.matchar.2022.112005__Materials Characterization, vol. 190, 112005, Elsevier BV, 2022, doi:10.1016/j.matchar.2022.112005.
LibreCat: /record/36328
DOI: 10.1016/j.matchar.2022.112005

Reitz, Alexander, et al. “Influence of Thermomechanical Processing on the Microstructural and Mechanical Properties of Steel 22Mn.”10.1016/j.msea.2022.142780__Materials Science and Engineering: A, vol. 838, 142780, Elsevier BV, 2022, doi:10.1016/j.msea.2022.142780.
LibreCat: /record/29811
DOI: 10.1016/j.msea.2022.142780

Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.”10.1016/j.matlet.2022.132384__Materials Letters, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.
LibreCat: /record/31076
DOI: 10.1016/j.matlet.2022.132384

Hein, Maxwell, et al. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, 107235, Elsevier BV, 2022, doi:10.1016/j.ijfatigue.2022.107235.
LibreCat: /record/41496
DOI: 10.1016/j.ijfatigue.2022.107235

Pramanik, Sudipta, et al. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.”10.1016/j.msea.2022.143887__Materials Science and Engineering: A, vol. 854, 143887, Elsevier BV, 2022, doi:10.1016/j.msea.2022.143887.
LibreCat: /record/41495
DOI: 10.1016/j.msea.2022.143887

Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.”10.1016/j.matlet.2022.132384__Materials Letters, vol. 321, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.
LibreCat: /record/41501
DOI: 10.1016/j.matlet.2022.132384

Pramanik, Sudipta, et al. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.”10.1016/j.msea.2022.143887__Materials Science and Engineering: A, vol. 854, 143887, Elsevier BV, 2022, doi:10.1016/j.msea.2022.143887.
LibreCat: /record/41491
DOI: 10.1016/j.msea.2022.143887

Hein, Maxwell, et al. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.”10.1016/j.ijfatigue.2022.107235__International Journal of Fatigue, vol. 166, 107235, Elsevier BV, 2022, doi:10.1016/j.ijfatigue.2022.107235.
LibreCat: /record/41490
DOI: 10.1016/j.ijfatigue.2022.107235

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.”10.1016/j.jajp.2022.100133__Journal of Advanced Joining Processes, vol. 6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.
LibreCat: /record/34069
DOI: 10.1016/j.jajp.2022.100133

Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.”10.1016/j.jajp.2022.100134__Journal of Advanced Joining Processes, 100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.
LibreCat: /record/34068
DOI: 10.1016/j.jajp.2022.100134

Rozo Vasquez, Julian, et al. “Coupled Microscopic and Micromagnetic Depth-Specific Analysis of Plastic Deformation and Phase Transformation of Metastable Austenitic Steel AISI 304L by Flow Forming.”10.1515/pm-2022-0064__Practical Metallography, vol. 59, no. 11, Walter de Gruyter GmbH, 2022, pp. 660–75, doi:10.1515/pm-2022-0064.
LibreCat: /record/34000
DOI: 10.1515/pm-2022-0064

Kersting, Lukas, et al. “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes.”10.4028/p-yp2hj3__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 862–74, doi:10.4028/p-yp2hj3.
LibreCat: /record/33999
DOI: 10.4028/p-yp2hj3

Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.”10.4028/p-5fxp53__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1457–67, doi:10.4028/p-5fxp53.
LibreCat: /record/32869
DOI: 10.4028/p-5fxp53

Gräßler, Iris, et al. “Proactive Management of Requirement Changes in the Development of Complex Technical Systems.”10.3390/app12041874__Applied Sciences, vol. 12, no. 4, 1874, MDPI AG, 2022, doi:10.3390/app12041874.
LibreCat: /record/30213
DOI: 10.3390/app12041874

Ahmed, Hammad, et al. “Multichannel Superposition of Grafted Perfect Vortex Beams.”10.1002/adma.202203044__Advanced Materials, vol. 34, no. 30, 2203044, Wiley, 2022, doi:10.1002/adma.202203044.
LibreCat: /record/32068
DOI: 10.1002/adma.202203044

Cresson, Jacky, and Khaled Hariz-Belgacem. “About the Structure of the Discrete and Continuous Eringen’s Nonlocal Elastica.”10.1177/10812865221108094__Mathematics and Mechanics of Solids, 108128652211080, SAGE Publications, 2022, doi:10.1177/10812865221108094.
LibreCat: /record/39412
DOI: 10.1177/10812865221108094

Cresson, Jacky, and Khaled Hariz Belgacem. “About the Structure of the Discrete and Continuous Eringen’s Nonlocal Elastica.”10.1177/10812865221108094__Mathematics and Mechanics of Solids, 108128652211080, SAGE Publications, 2022, doi:10.1177/10812865221108094.
LibreCat: /record/39400
DOI: 10.1177/10812865221108094

Alavi, Sascha, et al. “The Ambivalent Role of Monetary Sales Incentives in Service Innovation Selling.”10.1111/jpim.12600__Journal of Product Innovation Management, vol. 39, no. 3, Wiley, 2022, pp. 445–63, doi:10.1111/jpim.12600.
LibreCat: /record/46634
DOI: 10.1111/jpim.12600

Marschalt, Christoph, et al. “Far-Field Calculation from Magnetic Huygens Box Data Using the Boundary Element Method.”10.1109/ssi56489.2022.9901431__2022 Smart Systems Integration (SSI), IEEE, 2022, doi:10.1109/ssi56489.2022.9901431.
LibreCat: /record/33509
DOI: 10.1109/ssi56489.2022.9901431

Strohmeier, Stefan, et al. “(How) Do Advanced Data and Analyses Enable HR Analytics Success? A Neo-Configurational Analysis.”10.1108/bjm-05-2021-0188__Baltic Journal of Management, vol. 17, no. 3, Emerald, 2022, pp. 285–303, doi:10.1108/bjm-05-2021-0188.
LibreCat: /record/50463
DOI: 10.1108/bjm-05-2021-0188

Hälterlein, Jens. “Technological Expectations and the Making of Europe.”10.23987/sts.110036__Science &; Technology Studies, vol. 36, no. 2, Science and Technology Studies, 2022, pp. 26–46, doi:10.23987/sts.110036.
LibreCat: /record/50604
DOI: 10.23987/sts.110036

Wells, Aaron. “Science and the Principle of Sufficient Reason: Du Châtelet Contra Wolff.”10.1086/723961__HOPOS: The Journal of the International Society for the History of Philosophy of Science, vol. 13, no. 1, University of Chicago Press, 2022, pp. 24–53, doi:10.1086/723961.
LibreCat: /record/51007
DOI: 10.1086/723961

Duderija, B., et al. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.”10.1016/j.jajp.2022.100137__Journal of Advanced Joining Processes, vol. 7, 100137, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100137.
LibreCat: /record/43021
DOI: 10.1016/j.jajp.2022.100137

Köhler, Daniel, et al. “Investigations on Combined &;lt;I&;gt;In Situ&;lt;/I&;gt; CT and Acoustic Analysis during Clinching.”10.4028/p-32330d__Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1489–97, doi:10.4028/p-32330d.
LibreCat: /record/51197
DOI: 10.4028/p-32330d

Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.
LibreCat: /record/31828
DOI: 10.1016/j.jajp.2022.100108

Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.
LibreCat: /record/31238
DOI: 10.1016/j.jajp.2022.100108

Böhne, Christoph, et al. “The Influence of Electrode Indentation Rate on LME Formation during RSW.”10.29391/2022.101.015__Welding Journal, vol. 101, no. 7, American Welding Society, 2022, pp. 197–207, doi:10.29391/2022.101.015.
LibreCat: /record/52613
DOI: 10.29391/2022.101.015

Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.”10.1016/j.jajp.2022.100108__Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.
LibreCat: /record/34215
DOI: 10.1016/j.jajp.2022.100108

Grimm, Sebastian, et al. “Insights into the Decomposition of Zirconium Acetylacetonate Using Synchrotron Radiation: Routes to the Formation of Volatile Zr-Intermediates.”10.1557/s43578-022-00566-6__Journal of Materials Research, vol. 37, no. 9, Springer Science and Business Media LLC, 2022, pp. 1558–75, doi:10.1557/s43578-022-00566-6.
LibreCat: /record/53084
DOI: 10.1557/s43578-022-00566-6

Grimm, Sebastian, et al. “Mechanism and Kinetics of the Thermal Decomposition of Fe(C<sub>5</sub>H<sub>5</sub>)<sub>2</sub> in Inert and Reductive Atmosphere: A SynchrotronAssisted Investigation in A Microreactor.”10.1002/admi.202200192__Advanced Materials Interfaces, vol. 9, no. 22, Wiley, 2022, doi:10.1002/admi.202200192.
LibreCat: /record/53083
DOI: 10.1002/admi.202200192

Lange, Sven, et al. “Adaptation and Optimization of Planar Coils for a More Accurate and Far-Reaching Magnetic Field-Based Localization in the Near Field.”10.1109/ssi52265.2021.9466958__2021 Smart Systems Integration (SSI), IEEE, 2021, doi:10.1109/ssi52265.2021.9466958.
LibreCat: /record/22532
DOI: 10.1109/ssi52265.2021.9466958

d’Agostini, Franca, and Elena Ficara. “Hegel’s Interpretation of the Liar Paradox.”10.1080/01445340.2021.1927455__History and Philosophy of Logic, Informa UK Limited, 2021, pp. 1–24, doi:10.1080/01445340.2021.1927455.
LibreCat: /record/30099
DOI: 10.1080/01445340.2021.1927455

Hagengruber, Ruth, and Sarah Hutton, editors. Women Philosophers from the Renaissance to the Enlightenment. 1st ed., Routledge, 2021.
LibreCat: /record/21276

Mirhosseini, Hossein, et al. “An Automated Approach for Developing Neural Network Interatomic Potentials with FLAME.”10.1016/j.commatsci.2021.110567__Computational Materials Science, vol. 197, 110567, Elsevier BV, 2021, doi:10.1016/j.commatsci.2021.110567.
LibreCat: /record/33657
DOI: 10.1016/j.commatsci.2021.110567

Wortmann, Martin, et al. “Anomalous Bulk Diffusion of Methylene Diphenyl Diisocyanate in Silicone Elastomer.”10.1016/j.ijheatmasstransfer.2021.121536__International Journal of Heat and Mass Transfer, vol. 177, 121536, Elsevier BV, 2021, doi:10.1016/j.ijheatmasstransfer.2021.121536.
LibreCat: /record/35327
DOI: 10.1016/j.ijheatmasstransfer.2021.121536

Hagengruber, Ruth. “Du Châtelet, Émilie (1706–1749).”10.1007/978-3-319-20791-9_410-1__Encyclopedia of Early Modern Philosophy and the Sciences, Springer International Publishing, 2021, doi:10.1007/978-3-319-20791-9_410-1.
LibreCat: /record/34707
DOI: 10.1007/978-3-319-20791-9_410-1

Mirbabaie, Milad, et al. “The Rise of Artificial Intelligence – Understanding the AI Identity Threat at the Workplace.”10.1007/s12525-021-00496-x__Electronic Markets, vol. 32, no. 1, Springer Science and Business Media LLC, 2021, pp. 73–99, doi:10.1007/s12525-021-00496-x.
LibreCat: /record/37144
DOI: 10.1007/s12525-021-00496-x

Dahmen, Stephan. Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press, 2021, doi:10.14361/9783839457061.
LibreCat: /record/37274
DOI: 10.14361/9783839457061

Dahmen, Stephan. Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press, 2021, doi:10.14361/9783839457061.
LibreCat: /record/37273
DOI: 10.14361/9783839457061

Ichev, Riste, et al. Cost of Debt for Private Firms Revisited: Voluntary Audits as a Reflection of Risk. 2021.
LibreCat: /record/37136

Cheng, C., et al. “Non-Linear Mean-Field Modelling of UD Composite Laminates Accounting for Average Asymmetric Plasticity of the Matrix, Debonding and Progressive Failure.”10.1016/j.compositesb.2021.109209__Composites Part B: Engineering, vol. 224, 109209, 2021, doi:10.1016/j.compositesb.2021.109209.
LibreCat: /record/23431
DOI: 10.1016/j.compositesb.2021.109209

Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.”10.4028/www.scientific.net/kem.883.81__Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 81–88, doi:10.4028/www.scientific.net/kem.883.81.
LibreCat: /record/34227
DOI: 10.4028/www.scientific.net/kem.883.81

Weiß, Deborah, et al. “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HX.”10.4028/www.scientific.net/kem.883.127__Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 127–32, doi:10.4028/www.scientific.net/kem.883.127.
LibreCat: /record/30675
DOI: 10.4028/www.scientific.net/kem.883.127

Klement, Philip, et al. “Atomically Thin Sheets of LeadFree 1D Hybrid Perovskites Feature Tunable WhiteLight Emission from SelfTrapped Excitons.”10.1002/adma.202100518__Advanced Materials, vol. 33, no. 23, 2100518, Wiley, 2021, doi:10.1002/adma.202100518.
LibreCat: /record/40434
DOI: 10.1002/adma.202100518

Kappe, Fabian, et al. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.”10.4028/www.scientific.net/kem.883.3__Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 3–10, doi:10.4028/www.scientific.net/kem.883.3.
LibreCat: /record/34226
DOI: 10.4028/www.scientific.net/kem.883.3

Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.”10.1016/j.msea.2021.142312__Materials Science and Engineering: A, vol. 831, 142312, Elsevier BV, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat: /record/41508
DOI: 10.1016/j.msea.2021.142312

Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.”10.1002/mawe.202000288__Materialwissenschaft Und Werkstofftechnik, vol. 52, no. 7, Wiley, 2021, pp. 703–16, doi:10.1002/mawe.202000288.
LibreCat: /record/41511
DOI: 10.1002/mawe.202000288

Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.”10.1016/j.msea.2021.141662__Materials Science and Engineering: A, vol. 822, 141662, Elsevier BV, 2021, doi:10.1016/j.msea.2021.141662.
LibreCat: /record/41512
DOI: 10.1016/j.msea.2021.141662

Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.”10.1016/j.ijfatigue.2021.106498__International Journal of Fatigue, vol. 153, 106498, Elsevier BV, 2021, doi:10.1016/j.ijfatigue.2021.106498.
LibreCat: /record/41510
DOI: 10.1016/j.ijfatigue.2021.106498

Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.”10.1016/j.matlet.2021.130890__Materials Letters, vol. 306, 130890, Elsevier BV, 2021, doi:10.1016/j.matlet.2021.130890.
LibreCat: /record/41509
DOI: 10.1016/j.matlet.2021.130890

Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.”10.1007/s11665-021-06065-9__Journal of Materials Engineering and Performance, vol. 30, no. 11, Springer Science and Business Media LLC, 2021, pp. 8048–56, doi:10.1007/s11665-021-06065-9.
LibreCat: /record/41517
DOI: 10.1007/s11665-021-06065-9

Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.”10.1016/j.jallcom.2021.159544__Journal of Alloys and Compounds, vol. 871, 159544, Elsevier BV, 2021, doi:10.1016/j.jallcom.2021.159544.
LibreCat: /record/41514
DOI: 10.1016/j.jallcom.2021.159544

Hubner-Benz, Sylvia, et al. “How Entrepreneur’s Leadership Behavior and Demographics Shape Applicant Attraction to New Ventures: The Role of Stereotypes.”10.1080/09585192.2021.1893785__The International Journal of Human Resource Management, vol. 34, no. 11, Informa UK Limited, 2021, pp. 2137–72, doi:10.1080/09585192.2021.1893785.
LibreCat: /record/48520
DOI: 10.1080/09585192.2021.1893785

Hippert, Benjamin, and André Uhde. CDS Investors’ Risk Perceptions of M&;A Announcements.
LibreCat: /record/36060

Hippert, Benjamin, et al. Determinants of CDS Trading on Major Banks.
LibreCat: /record/36063

Wells, Aaron. “Du Châtelet on the Need for Mathematics in Physics.”10.1086/714874__Philosophy of Science, vol. 88, no. 5, Cambridge University Press (CUP), 2021, pp. 1137–48, doi:10.1086/714874.
LibreCat: /record/51003
DOI: 10.1086/714874

Köhler, Daniel, et al. “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”10.4028/www.scientific.net/kem.883.89__Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 89–96, doi:10.4028/www.scientific.net/kem.883.89.
LibreCat: /record/51202
DOI: 10.4028/www.scientific.net/kem.883.89

Köhler, D., et al. “Characterisation of Lateral Offsets in Clinch Points with Computed Tomography and Transient Dynamic Analysis.”10.1016/j.jajp.2021.100089__Journal of Advanced Joining Processes, vol. 5, 100089, Elsevier BV, 2021, doi:10.1016/j.jajp.2021.100089.
LibreCat: /record/51198
DOI: 10.1016/j.jajp.2021.100089

Winkler, Christoph, et al. “From Entrepreneurial Experience to Expertise: A Self-Regulated Learning Perspective.”10.1080/00472778.2021.1883041__Journal of Small Business Management, vol. 61, no. 4, Informa UK Limited, 2021, pp. 2071–96, doi:10.1080/00472778.2021.1883041.
LibreCat: /record/52705
DOI: 10.1080/00472778.2021.1883041

Bernemann, Sören Antonius. Erstellung eines CFD-Modells für die Entwicklung eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen. 2020.
LibreCat: /record/23796

Szubartowicz, Eva, and Guido Schryen. “Timing in Information Security: An Event Study on the Impact of Information Security Investment Announcements.” Journal of Information System Security, vol. 16, no. 1, Information Institute Publishing, Washington DC, USA, 2020, pp. 3–31.
LibreCat: /record/16249

Pineda, Pedro, and Isabel Steinhardt. “The Debate on Student Evaluations of Teaching: Global Convergence Confronts Higher Education Traditions.”10.1080/13562517.2020.1863351__Teaching in Higher Education, 2020, pp. 1–21, doi:10.1080/13562517.2020.1863351.
LibreCat: /record/27117
DOI: 10.1080/13562517.2020.1863351

Opel, Simone Anna, and Michael Schlichtig. “Data Science und Big Data in der beruflichen Bildung – Konzeption und Erprobung eines Projektkurses für die Sekundarstufe II.”https://doi.org/10.3278/6004722w__Sammelband der 27. Fachtagung der BAG Berufliche Bildung, edited by Thomas Vollmer et al., vol. 55, wbv Media GmbH &; Co. KG, 2020, pp. 176–94, doi:https://doi.org/10.3278/6004722w.
LibreCat: /record/29298
DOI: https://doi.org/10.3278/6004722w

Hoellger, Christian, et al. “Intergenerational Value Similarity in Adulthood.”10.1177/0192513x20943914__Journal of Family Issues, vol. 42, no. 6, SAGE Publications, 2020, pp. 1234–57, doi:10.1177/0192513x20943914.
LibreCat: /record/32559
DOI: 10.1177/0192513x20943914

Hanusch, Maximilian. “The Regularity Problem for Lie Groups with Asymptotic Estimate Lie Algebras.”10.1016/j.indag.2019.12.001__Indagationes Mathematicae, vol. 31, no. 1, Elsevier BV, 2020, pp. 152–76, doi:10.1016/j.indag.2019.12.001.
LibreCat: /record/34828
DOI: 10.1016/j.indag.2019.12.001

Kottmann, Brigitte, and Catania Pieper. “Project ‘Schule Für Alle’ as a Mentoring Programme in University Teacher Education: Professionalization Processes of Student Teachers in Different Practical University Phases.”10.1556/063.2020.00022__Hungarian Educational Research Journal, vol. 10, no. 3, 2020, pp. 232–51, doi:10.1556/063.2020.00022.
LibreCat: /record/39817
DOI: 10.1556/063.2020.00022

Nowroozi, Mohammad Ali, et al. “High Cycle Life All-Solid-State Fluoride Ion Battery with La&;jats:Sub&;2&;/Jats:Sub&;NiO&;jats:Sub&;4+d&;/Jats:Sub&; High Voltage Cathode.”10.1038/s43246-020-0030-5__Communications Materials, vol. 1, no. 1, 27, Springer Science and Business Media LLC, 2020, doi:10.1038/s43246-020-0030-5.
LibreCat: /record/41027
DOI: 10.1038/s43246-020-0030-5

Schmal, Christopher, and Gerson Meschut. “Refill Friction Stir Spot and Resistance Spot Welding of Aluminium Joints with Large Total Sheet Thicknesses (III-1965-19).”10.1007/s40194-020-00922-2__Welding in the World, vol. 64, no. 9, Springer Science and Business Media LLC, 2020, pp. 1471–80, doi:10.1007/s40194-020-00922-2.
LibreCat: /record/43160
DOI: 10.1007/s40194-020-00922-2

Gollnick, Maik, et al. “Early Stage Crack Detection in Mechanically Joined Steel/Aluminum Joints by Condition Monitoring.”10.3139/120.111558__Materials Testing, vol. 62, no. 9, Walter de Gruyter GmbH, 2020, pp. 877–82, doi:10.3139/120.111558.
LibreCat: /record/43162
DOI: 10.3139/120.111558

Schmal, Christopher, and Gerson Meschut. “Process Characteristics and Influences of Production-Related Disturbances in Resistance Element Welding of Hybrid Materials with Steel Cover Sheets and Polymer Core.”10.1007/s40194-019-00842-w__Welding in the World, vol. 64, no. 3, Springer Science and Business Media LLC, 2020, pp. 437–48, doi:10.1007/s40194-019-00842-w.
LibreCat: /record/43161
DOI: 10.1007/s40194-019-00842-w

Tillmann, Wolfgang, et al. “Effect of Substrate Pretreatment on the Low Cycle Fatigue Performance of Tungsten Carbidecobalt Coated Additive Manufactured 316L Substrates.”10.1002/mawe.202000109__Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 11, Wiley, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat: /record/41518
DOI: 10.1002/mawe.202000109

Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.”10.1016/j.msea.2020.139597__Materials Science and Engineering: A, vol. 794, 139597, Elsevier BV, 2020, doi:10.1016/j.msea.2020.139597.
LibreCat: /record/41520
DOI: 10.1016/j.msea.2020.139597

Andreiev, Anatolii, et al. “Degradable Silverbased Alloys.”10.1002/mawe.201900191__Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 4, Wiley, 2020, pp. 517–30, doi:10.1002/mawe.201900191.
LibreCat: /record/41522
DOI: 10.1002/mawe.201900191

Böhm, Eva, et al. “Drivers and Outcomes of Salespersons’ Value Opportunity Recognition Competence in Solution Selling.”10.1080/08853134.2020.1778484__Journal of Personal Selling and Sales Management, vol. 40, no. 3, Informa UK Limited, 2020, pp. 180–97, doi:10.1080/08853134.2020.1778484.
LibreCat: /record/46636
DOI: 10.1080/08853134.2020.1778484

Hubner-Benz, Sylvia. “When Entrepreneurs Become Leaders: How Entrepreneurs Deal with People Management.”10.1504/ijev.2020.105571__International Journal of Entrepreneurial Venturing, vol. 12, no. 2, 161, Inderscience Publishers, 2020, doi:10.1504/ijev.2020.105571.
LibreCat: /record/48524
DOI: 10.1504/ijev.2020.105571

Rudic, Biljana, et al. “Hustlers, Hipsters and Hackers: Potential Employees’ Stereotypes of Entrepreneurial Leaders.”10.1016/j.jbvi.2020.e00220__Journal of Business Venturing Insights, vol. 15, e00220, Elsevier BV, 2020, doi:10.1016/j.jbvi.2020.e00220.
LibreCat: /record/48521
DOI: 10.1016/j.jbvi.2020.e00220

Mordhorst, Lisa, and Bernd Gössling. “Dual Study Programmes as a Design Challenge: Identifying Areas for Improvement as a Starting Point for Interventions.”10.15460/eder.4.1.1482__EDeR. Educational Design Research, vol. 4, no. 1, 24, Staats- und Universitatsbibliothek Hamburg Carl von Ossietzky, 2020, doi:10.15460/eder.4.1.1482.
LibreCat: /record/48366
DOI: 10.15460/eder.4.1.1482