I. Gräßler, I. Mozgova, J. Pottebaum, M. Ott, P. Jung, and P. Hesse, “Handling of uncertainties in the design of sustainable Additive Manufacturing products by merging Design-for-X and Scenario-Technique,” in Procedia CIRP ICME, Gulf of Naples, 2023.

S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” presented at the 34th Annual Solid Freeform Fabrication Symposium, Austin, TExas, USA, 2023.

I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,”https://doi.org/10.26153/tsw/50931__in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi:https://doi.org/10.26153/tsw/50931 .

F. Neitzel, I. Kletetzka, and H.-J. Schmid, “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis,”https://doi.org/10.26153/tsw/50926__in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi:https://doi.org/10.26153/tsw/50926 .

M. Ott, N. Meihöfener, and R. Koch, “Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien,”10.48447/ADD-2022-014__in Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, Berlin, 2022, vol. 7, pp. 91–106, doi:10.48447/ADD-2022-014 .

S. Urbanek et al., “Design and Experimental Investigation of an Additively Manufactured PMSM Rotor,”10.1109/IEMDC47953.2021.9449566__Connecticut, USA, 2021, doi:10.1109/IEMDC47953.2021.9449566 .

E. Zhuravlev et al., “Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry,”10.1016/j.matdes.2021.109677__Materials &; Design, Art. no. 109677, 2021, doi:10.1016/j.matdes.2021.109677 .

D. Ahlers, Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V , vol. 19. Shaker, 2020.

S. Josupeit, On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process, vol. 11. Düren: Shaker Verlag GmbH, 2019.